20 Myths About Upvc Replacement Door Handles: Busted UPVC Replacement Door Handles

The handles on your doors are worn out with time and require to be replaced. It is important to match the dimensions of the old handles when replacing them.

The top screw's position, the lever and the keyhole sizes are the three measurements you need to determine. Use the size guide to help you.

Inline Lever/Lever

A lever handle is a modern-day door handle designed to suit new or replacement doors. This kind of handle is available in many designs and finishes. A number of manufacturers make this type of handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The handles made of uPVC/Composite are made of tough materials and are perfect for multi-point lock doors that require a strong design. The handles are inline, and use the same screws and spindle to secure them. They can be easily mounted on new or existing uPVC/Composite door.

The design of the sprung lever allows the handle to be set and angled to ensure a comfortable experience and is suitable for all users. The handle has been tested to 200 000 cycles. This ensures that the quality of finish and performance will last for a long time. The sprung lever can be shortened to fit the widest range of locks. This is particularly useful for doors with narrower openings where the cylinder is further back from the door. A lever that is shorter is a good choice for doors that have latches that can be activated by the thumb turn inside.

Lever Pad

A Lever Pad door handle made of upvc functions differently than lever handles on doors. These handle types can either operate from a single spindle (inline) or independently from both sides using two offset spindles or inline (pad). They are typically used on UPVC doors with double glazing. They are available in a range of finishes and variations.

upvc door handle repairmywindowsanddoors.co.uk have been tested to a minimum of 200,000 cycles and are available in several finishes, including White and Silver, as well as Chrome & Gold. The finish is in line with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, thereby giving the handle a high level of durability and performance for its intended use.

All UPVC levers for handles include a spindle and screws, and can be fitted on the uPVC door. The 211mm backplate fixation centres allow for a bigger handle, which is usually a benefit when replacing an old or damaged multi-point door lock mechanism. These levers for handles are also sprung, solving the problem of handles that slide from their horizontal position when they are not in use.

It is crucial to ensure that the PZ dimensions of both the multipoint lock as well as the uPVC doors when choosing the replacement UPVC spindle and handle. This measurement can also be called 'handle centre or cylinder centres'. It is important to match the right handles.

When you have the right PZ size you will then have to ensure that the handle lever pads and push pads are of a suitable shape to fit the American with Disabilities Act (ADA) compatible handles you require for your doors. These are typically rectangular or round in design with an internal lever and external push pad.

The majority of the UPVC Lever Pads we sell are spring-loaded. This means they return to a horizontal state when not being used instead of hanging, and possibly securing to the frame. This stops draughts from entering the home. The majority of UPVC lever pad style handles come in both left and right handed models, allowing them to be placed on either side of the doors.

Euro Cylinder

Cylinder locks are found on uPVC and other types of doors. They work with a key to unlock a cylinder case that is then revealed with pins that can be aligned with the pins in the lock body and allowing them to turn the cam, thereby opening the door. Euro cylinders can be equipped with up to six pins with external and internal doors usually needing different levels of security.

The choice of the correct cylinder is vitally important; this depends on how your doors and handles are used. For instance, doors that are external must be secured with a higher security cylinder, whilst internal doors can be secured with a standard cylinder. Additionally, certain cylinders are available with extra features which can enhance security further, such as anti-drill or anti-bump properties.

To make sure that the euro cylinder is of the right size for your door, it must be measured correctly. The cylinder needs to be measured from the central screw hole to the ends of the cylinder. This includes the thumb turn in the event that one is present. It is recommended to do this while the lock is in place however when this isn't possible, you may take it off to measure. A cylinder that extends beyond the handle and escutcheon could be vulnerable to attacks, such as lock snapping, so it is essential that it is not too long.

Most modern cylinders are made with anti-drill and bump resistance features included in their design. They are designed to minimize attack chances by forcing the cylinders to rotate in a new direction. This can help prevent attacks and ensure your doors are secure.


Certain cylinders are constructed to withstand snapping. This is a common attack on cylinders. A special tool is used to break the break line of the lock and then the front of the cylinder is snapped off. This is a faster and more convenient method of gaining access than the use of a multipoint locking system. It also leaves less evidence of the break-in which could make it difficult to prove insurance claims.

Spring Cassette

This spring cassette is found in the base plate of your door handle. It is a spring-loaded solution to bring your multipoint lock handles back to their normal position after use. The handles were previously equipped with no spring and would drop when the locking mechanism was disconnected. The addition of this simple element is one of the best ways to correct this, and is a great way to prevent your upvc doors from getting stuck in either closed or open position, as these aren't always simple to close manually.

These spring cassettes are specifically designed for use with sprung multipoint locks, they will not fit multipoint handles that are not sprung and you must have a bespoke hole cut into the backplate to allow them to fit (please check the image for a technical diagram). They are a replacement for damaged or missing cassettes inside the backplate of the door handle for numerous kinds of uPVC doors. They feature a square cut out which can accommodate an 8mm spindle, and are available in a variety of.

These spring cassettes are a great value-for-money way to fix the problem of door handles that are sliding. These spring cassettes are simple to install and will extend the life of your uPVC door. For more information about our wide range of uPVC accessories and spares, contact us today. in contact with our team. We are always happy to provide professional advice and assistance you.