The Reasons To Focus On Enhancing Double Glazing Door Lock Repairs Double Glazing Door Lock Repairs

Have your uPVC window or door mechanism become faulty? Perhaps the window or door handles aren't aligned properly or are hard to use.

You will lose energy in the event that your double-glazed doors fail to perform as they should. This also increases the chance of burglary. Owen the Locksmith will be able to repair your door lock at an affordable price.

Snapped Key

It can be a hassle when a key gets stuck inside a lock. It can also be a security risk in that it can leave you vulnerable to an intruder if the door is not locked. Fortunately, there are some quick fixes that you can try to resolve the issue and get your door working properly again.

Keep calm. If you panic you could end up pushing the damaged key piece further into the lock.

Spray WD-40 or another penetrating lubricant into the lock. This will allow the broken piece to be removed more easily. You can also employ a screwdriver in order to break pieces that might be blocking the way. If you're lucky enough to have a bit of the key left hanging out, you can use a paperclip or some other metal object with a thin surface to grab it and pull it out. Both methods are effective, but you need to be careful not to push the broken key piece further into the keyway.


Some paperclips have grooved edges, which can serve as a hook extractor and some Jigsaw blades can also be used for this use. If you don't happen to have any of these items, you can bend a hook with needle-nosed pliers. Finally, a pair of tweezers is a good way to grasp and remove the remaining piece of the key that was broken.

If you're unable to pull the broken piece of the key out, you can try using a lock de-icer. It is available in most hardware stores and works by freezing any moisture that may be present in the lock.

If none of these methods seem to be helping you, it's time to call locksmith. The experts at Fitlocks can quickly fix problems with uPVC door locks and mechanisms that have snapped keys as well as broken handles. They can also alter the double glazing door mechanisms to ensure that they are easier to use. Book a double glazing repair through us online, or give us a phone call to discuss your requirements.

Broken Cylinder

A damaged cylinder can pose an extremely risky security issue. A professional locksmith can easily repair the cylinder. To fix the cylinder, locksmiths must tap it. This can be done with a hammer or other tool. However, the best method is to make use of a wire or a long match. Place the match or wire's end close to the keyway. The locksmith can then hit the lock to crack it. This is more secure than using the hammer, which could cause damage to the lock.

The most frequent cause of cracks in the cylinder head is overheating. This can happen when the block and cylinder head are made of different metals such as cast-iron and aluminium. double glazing repairs near me can be heated and cool at different rates. This could cause localized hotspots to expand more quickly than the rest.

Corrosion is another possible reason for cracks in the cylinder. If the head and block of the cylinder are not maintained in a timely manner they could corrosion or rust, which can cause them to expand more than they would normally. This could lead to cracks as time passes.

If your uPVC window or door lock is stiff or requires lots of pressure to turn, this can be caused by many things. A defective locking mechanism, misalignment, or an old handle are the most common reasons for this issue.

Fortunately, this is an easy and affordable fix for the majority of double glazing owners. A professional locksmith should be able to solve this problem within an hour after arriving at your residence. They can fix the locking mechanisms, or change the window handles, and also change the gearboxes based on the specific requirements of your home. A skilled locksmith will always be able to provide you with a recommendation of the most cost-effective option for your home. They can also suggest upgrades to high-security 3 Star Euro cylinders, TS007, that will provide an extra layer of protection against burglars. It is a small cost to get the peace of mind that comes from knowing that your uPVC door is secure.

Broken Handle

It's not a surprise that window handle locks could break. They have complex mechanisms that wear out over time. It isn't always easy to pinpoint the reason for the broken window handle lock and repair it correctly.

Fixing your broken handle, whether it's an internal locking mechanism or latch, will improve the security of your uPVC door and prevent draughts. If you do not repair or replace your handle can be expensive and can harm the door's frame as well as lock and frame, so it's worth spending the time to do it right.

Screwdriver When the window is open and the screw loose, loosen the handle. This should be located on the inside of the back plate, normally hidden by an attractive cover for the screw for aesthetic reasons. It is important to not be able to replace any internal parts of the handle such as the levers and plates on either side. Keep them in the same order to make it easier to replace if necessary.

Then, with an additional screwdriver, loosen the screw that connects the handle to the spindle in the back. Once the screw is loose, you can pull the handle out and take the broken spindle out. Replace it with a new spindle, ensuring that it's the same length (you can purchase them online or at hardware stores). Screw it in the correct position. Be careful not to overtighten because this could cause damage to the handle or the window frame.

Close the handle and test it. It is likely that it will operate smoothly and you'll be able open your window once more.

Be sure to double-check that your uPVC window is closing properly when you're using the handle. If they aren't closing properly, you may experience damp or draughts inside your home. It could also affect the energy efficiency of your home. A local window company, like Core Sash Windows, will be capable of adjusting the hinges on your window frames so they shut correctly.

Broken Spindle

It is quite common that the spindle inside the handle breaks, rather than the handle itself. This is especially common in uPVC tilt and turn windows. These kinds of windows require a handle which is a lock mechanism that is located in the window frame. The handle is attached to a central rod which activates mushroom-shaped locking cams that secure the window frame keep. If the dead latch mechanism is not able to open after the handle is turned, it is likely the spindle has been damaged. This could be a frustrating issue.

Fortunately, there are options to remedy this situation. A good locksmith will be able to quickly and effectively fix this issue. They can disassemble the window handle by using a tool to remove the wheel portion of the mechanism, where the spindle goes. This can be done without causing any damage to the handle or causing other damage to the window frame.

Once the wheel has been removed the technician can then examine the spindle to determine what has caused it to break. This involves breaking down the spindle into its constituent parts and meticulously noting their general condition as in addition to any specific areas of damage or excessive wear. This process is usually carried out by technicians in a clean environment.

Next, clean the damaged spindle. This will help remove any dirt or debris which might be preventing it from working normally. After that the spindle is cleaned, it can be repaired or replaced. If it is replaced, the technician will need an identical dowel size to the one used in the first and drill mating holes in both pieces of the spindle. This will ensure that the spindle fits perfectly with the handle.

If the damaged spindle is beyond repair, it may be necessary to replace it completely. Home centers can sell generic replacements, but if your window design is unique then you'll have to speak with an expert in cabinet making or woodworking who can replicate the exact part. Once the new spindle is in place it can be fitted to the handle by line up the screw holes in the handle with the frames existing screws. Once the new handle is seated you will be ready to operate your uPVC window.