It's The Next Big Thing In Peugeot 208 Key Replacement Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot key fob suddenly stopped functioning, it could be because of a dead coin-cell battery, water damage, receiver module problems, or a damaged chip. These are all easy solutions that will bring your car back to speed in a matter of minutes!

Car keys can also be damaged due to the fact that the blade on the key gets worn. You can easily fix this problem by visiting your local Car Key Man Auto Locksmith to get a new blade installed.

Battery

The key fob inside your Peugeot 308 may die or become weak enough to not send a powerful signal. This can cause the key fob to cease working which prevents you from locking or opening the doors or starting your engine. You'll need a replacement battery for your key fob to repair this.

You'll have to purchase batteries for replacement from an auto parts store or at your local hardware store. When you buy the battery, ensure that it's new and hasn't been on the shelf for too long. A brand new battery is more capacity and will transmit a stronger signal to your vehicle.

After replacing the battery, try unlocking the doors and locking them with the key fob. If the doors won't unlock it's possible that the receiver module in the car is the cause. The local Peugeot dealer can reprogramme the receiver module.

The internal chip of the key fob can also be damaged. This can happen if you drop your key fob on the ground or expose it to water. Rubber seals that shield your chip from moisture may become worn out over time. This is especially true when you expose your key fob to water over long periods of time, for example, submerging it in the ocean. To stop new key for peugeot 207 from happening, you must keep your key fob away from moisture and never let it come into contact with water.

Water Damage

Don't let go of your key fob if it gets wet, regardless of whether you dropped in an aquisition or stumbled into a Puddle. Although the key fob is equipped with rubber seals which should shield it from water, prolonged exposure to water can cause damage to its electronic chip. Water is a good conductor and any water that is absorbed into the key fob will cause the short circuits to be in series, which will eventually ruin the electronic chip. After taking the battery out, scrub its contacts with isopropyl alcohol and dry it off completely before putting it back into.

A dead battery might be the reason why your Peugeot 308 won't start. If you have a spare vehicle, jumper cables can be used to start the engine again. If the battery is the issue, it will need to be replaced.

A bad receiver in the car may also block it from receiving the signal from the keyfob. It could be due to a problem with the antenna or wiring, or the key fob could be damaged. It could be necessary to programme a new key fob to your vehicle if using one. If you're unable to fix the issue on your own seek out a professional technician. A trained technician in the field will be able to diagnose the problem quickly, and fix the issue immediately.

Radio Interference

Interference can cause symptoms such as a fob that's not being recognized or has a narrow range. This can be either radiated, or conducted, with the latter being caused by power supply cables and speakers wiring that are too close to electrical components. Generally, re-routing the cables or moving them away from these components could resolve the issue.

It's unlikely that someone is watching your key fob's signals to steal your car, but it is possible that the signal has been drowned out by radio frequency interference. This is a simple issue to resolve.

If your key fob is not being recognized by the system, you can try a new battery. Make sure the battery is of the correct size and type. Incorrectly sized batteries could harm the fob.

These devices may interfere with the key signal, if they utilize the same radio frequency. It is recommended not attaching these devices to your key fob.

Pairing Issues

A car's remote keyless entry system includes an antenna that receives radio frequency signals from the key fob. If this receiver has developed an issue, you will not be in a position to begin your vehicle even if your key fob works and is reprogrammed. The issue could be caused by a number of causes, including a dead coin battery and water damage. The receiver could be malfunctioning because of an error in the software or internal damage to the key itself.

The coin battery in your Peugeot 308 keyfob has likely failed. The battery can be replaced, but you need to make sure that it is the proper battery for your keyfob. The wrong battery could cause further issues with the key fob, therefore it is best to choose the original or an alternative that is similar in size, voltage, and specifications.

Your Peugeot 308 keyfob may not work if it has been linked to an unrelated vehicle. This could happen if you have given your key fob to a friend or when the key has been used to unlock or start other vehicles. This can be solved by reprogramming the key fob using an OBDII scan. This tool will ask for details about your car, like its VIN or engine type. It is vital to enter the correct details.

This user has nothing created or favorited (yet).