5 Saab 9-3 Key Replacement Projects For Any Budget How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a distinct set of steps to take to add the second key. This requires an electronic handheld computer, referred to as Tech-2 that is operated by the dealer. A new key and transponder must be purchased and then programmed into the car.

Rotate your keys to stop one from wearing out more than the next. This will help keep your keys in good condition.

Replacement Case

As opposed to the traditional Saab keys of old, the new key fobs contain electronics which makes it difficult to duplicate. This has made stealing cars much more difficult than it was twenty years ago. But, it has also made replacing lost keys a more expensive undertaking.

Saab 9-3 owners should have two keys working. If one is lost, it costs a fortune to add another to the car, as it requires replacing the CIM module and re-programming the locking cylinders. Dealers charge between $100 and $200 to do this.

There are ways to reduce the high cost. Some parts suppliers will find the code on a spare key (usually the same one that opens the doors and turns off the ignition) and cut a brand new key blade out of metal for less than the dealer's cost. The key must, however, be the same as the original to work correctly within your car.

You can also change the case yourself by following these steps. You'll require a flathead and patience. With the screwdriver you can pull away the plastic and take out the emergency key. When the case is opened remove all electronics and place them into the new case. Place the key with the correct badge into the case.


Replacement Battery

The replacement battery for the Saab 9-3 is a cheap component that can be replaced quickly and easily. This YouTube tutorial for DIY Cyclone Cyd, a user on YouTube, explains how to replace the battery for the remote key fob in only four steps. This tutorial will work with any modern Saab key fob. However, the procedure could differ slightly.

This button is usually located just below the Saab logo on the back of the fob. This button is usually on the back of the fob, next to the Saab Logo. Next take a flathead screwdriver into the small hole of this button. This should be enough to open the case in order to change the battery.

After you have installed the batteries CR1632, it is possible to put back together your remote key fob. saab 9-3 key fob replacement can then program it into your car. The entire process shouldn't exceed an hour. This is a straightforward process that doesn't require any special tools.

If you lose a key, the procedure will be a bit more involved however it can be completed. The dealer must first read the VIN of the vehicle, and then purchase an additional TWICE module and key blade that is matched to the unique code. After that, they'll be required to cut the replacement key and then program it using the latest software tool known as MDI.

Replacement Key Fob

The key fob has a battery that is used to lock and unlock your car. Batteries have a finite lifespan and eventually will die. This is a common problem that happens with all cars, and the good news is that you can change the batteries in most key fobs and not have to replace the whole case. You can buy replacement fobs on Amazon that have all the electronics already in place, so you'll just pop open the case and replace the batteries in the original case. You'll need to take out the emergency key before you can replace the batteries. To do this, insert an small screwdriver with a flat head into the slot that is in the middle of the. The case will split once you rotate the screwdriver around it.

If you're ready to change your keys, have an extra set on hand. This will save you a significant amount of money. If you have a spare, you can ask the dealer cut an additional key and program it into your car, which is much cheaper than replacing the entire key fob.

It is possible to add a second key to your car If you don't already have one, but it will require lots of research and work. It costs around a hundred bucks to add an additional car key. The computer of the vehicle must also be programmed. Professionals can do this but it's not a cheap option.

Replacement Ignition

The current SAAB 9-3 features a more sophisticated alarm system built around a key code. This means that if you lose your only working key, adding an additional one could be extremely expensive because the car needs to have a computer module added and it must also be specifically programmed to accept an additional key. Even dealers can charge hundreds of dollars to program an entirely new key, even if they're unable to complete the task.

If you've lost the only working key, a dealer will replace your car's computer (known as the CIM or SAAB TWICE) to make the replacement, and will charge you the highest price for it. We can reprogramme the existing EEPROM in your car computer to make it ready for an additional key. This will save you more than 50% of what you would spend at the dealer.

If you've been an owner of a 03-11 SAAB 9-3, you probably know that the ignition key isn't the most durable. They can become incredibly sticky, and the buttons can be removed from them every now and then, so you should consider purchasing a new one if yours isn't functioning properly. It's not as difficult as it appears to replace the ignition key. With the appropriate tools, it could be done quickly.