7 Things About Double Glazing Repair You'll Kick Yourself For Not Knowing Why You Should Trust Your Double Glazing Repairs to Local Experts

It is impossible to replace double glazing by yourself, however a professional glass installer can help make the process simple and secure. It is also worth contacting the company you bought the glass from if it's still under warranty.

Drilling holes in windows with mist will allow the condensation to escape however it is only a short-term fix. Double glass that has blown away must be replaced in order to restore thermal efficiency.

Broken window panes

When a window's pane is broken, it leaves a gap in the double-glazing that can result in draughts and moisture. They're not just annoying but also can damage your property and your health. In humid environments, frayed frames, structural issues and other expensive repairs.

However, a damaged or broken window is usually a simple fix provided you know how to fix it correctly. Wear a pair of gloves and eye protection to safeguard yourself. Take away the glass fragments. Once you have removed the shards, employ a knife to cut through any glazing putty and metal glazing points. After the glass has been removed from the frame, take it off it carefully.

After you have cleaned the area and sanded the area to remove any paint or gunk, it is time to get ready for the new glass. Make sure to take measurements of the opening from side to side and from top to bottom and subtract 1/8 inch from both measurements to allow for any expansion or contraction of the frame over time. This will ensure that the new glass is properly fitted.

Then, you'll need to roll a cord of glaziers' compound all around the outside edge of the glass-frame joint. Then smooth it with your putty knife. Match the colour to the rest of the window frame. When the compound is dry, you can paint the new pane in the same colour as the rest of your window.

To stop the crack from spreading, create a small arc using your utility knife, just beyond the area cracked. This will narrow the crack and prevent it from spreading, saving your window without the need to replace it.

It can be difficult to make repairs yourself without the proper tools. It is safer and easier to call a company who specialises in repairs to local double-glazing. This will not only save you a lot of time and hassle, but it will also ensure that your double glazing is repaired expertly to the highest standards.

Broken seals

A leaky seal can cause your windows to lose their insulation properties, which can lead to drafts and a higher cost for energy. This lets humidity and moisture to get into the windows, causing fogging and condensation. Foggy windows are an inconvenience and will only get worse over time If you don't act.

There are several things you can do to stop window seals from breaking, including having your windows professionally installed and not cleaning your windows with a power washer. Even when your windows are in good condition it is essential to get the window seal replaced when you notice any signs of a break or a leak, like condensation between the glass panes or a noticeable increase in your energy costs.

Window seals are made of flexible materials that can become damaged over time. Older windows are more prone to suffer this issue, as are windows that are exposed to a lot of sunlight. Window seals may be damaged due to issues with installation, like gaps and uneven frames.

While it is possible to fix a broken window seal at home however, the process is complicated and could damage other parts of the windows, like the argon gas inside them. It is recommended to contact an expert to look over your windows and fix any damaged or worn seals.

Once the window seal has been changed, your double glazing system will perform just as it is supposed to. It will shield your home from heat loss and cold air infiltration. This will save you money on heating and cooling while ensuring your home is comfortable.

In the majority of cases, fixing an ineffective window seal is as simple as removing the window from its sash, and then removing the old sealant. Once the window is cleaned and is now ready to be installed, it will be filled with argon before being sealed again. While it is possible to do this on your own but it is advised to call an expert glazier to make sure that the job is done properly and safely.

Broken door handles


The door handle on the front of your home is a crucial element of your security. double glazing repairs near me opens the door and also connects to a latch that is set into the door's slot frame in order to keep it closed. If the handle of the door feels loose, it can cause problems opening the door. It may be a sign of issues with your locking mechanism too.

Fortunately, fixing a loose door handle is fairly simple. In most cases you can tighten the screw holding it in place. If the issue is deeper than that, you might require a new handle.

To begin, you must make sure that you open your door using a wedge or stop so that it doesn't close when you work on the knob or handle. This will stop it from causing damage to the paint, and also let you access all parts of the handle or doorknob without worrying about the latch being locked.

Next, you'll want to take off the cover plate on the door handle. It may appear like a piece of plastic, either rectangular or round, that is designed to hide screws for a cleaner appearance. Some of them may have a small detent or slot that you can push down using a flathead to release. Then, you will need to remove the base of the handle and expose the screws holding it in the position.

Most screws that keep your doorknob or door handle in place are hidden behind the cover plate. When you take off the cover plate, you can easily see all of the screws and tighten as necessary. It is not recommended to tighten too much the screws, since it could damage the knob or handle. Once the screws are tightened you can replace the base, and then put the handle or knob on top. Make sure that the holes of the handle or knob coincide with the detent holes or screw holes. Once you're finished, test out the handle to confirm that it's working as intended.

Chips and scratches

Sometimes, even the best-maintained double glazing may be damaged. It can only take a few hits from stray footballs or a sudden jolt of wind to cause chips, cracks and dents. These can alter the performance of your doors and windows and will need to be replaced with new ones. It is crucial to recognize the signs of damage and to notify your installer as quickly as you can. You can assist by describing the issue and pictures in the event that they are relevant.

Depending on the severity of the scratches or chips It is possible for them to be repaired without a lot of trouble. If the scratch is large enough to be felt with your fingernail, however it may be best to call in a glazier, as they will be able to utilize glass polish and some elbow grease to eliminate it. They can also provide some tips for maintaining your windows and doors in good order.

Also, you should look out for indications that the gas cavity between your window panes has sprung a leak. If you find condensation forming between the panes, it could mean that the gas inert has evaporated and warm air is making its way into your home. If you spot this issue it is crucial that you get in touch with your installer straight away since this issue will likely be covered under the warranty.

If your double-glazed windows are covered by guarantee and you are eligible to claim back any repair expenses. You could also consider switching to a different installer who can be trusted to provide superior quality products and top-quality customer service. Look up online reviews, verify the BBB or request references from past customers to make sure you select a reputable and quality firm. You should also ask about the certifications of major manufacturers and the Fenestration and Glazing Industry Alliance. This will help you avoid companies that are not licensed to install double glazing.