20 Fun Facts About Double Glazing Repair Why You Should Trust Your Double Glazing Repairs to Local Experts

It is impossible to replace double glazing by yourself, however an expert glass installer will make the job easy and safe. It's also worth checking with the company you purchased the glass from if it's still covered by warranty.

Drilling holes in misted windows will allow the condensation to escape however it is only a temporary solution. Blown double glazing must be replaced to improve the thermal efficiency.

Broken window panes

When a window pane breaks, it creates an obvious gap in the double glazing which can result in draughts and moisture. They're not only annoying but also can damage your home and health. The damp conditions can lead to rotted frames, structural problems and other costly repairs.

A damaged window is usually simple to repair if you are aware of the proper procedure. First, take the appropriate precautions to prevent injury, like wearing gloves and eye protection. Then, take out the old glass shards. Use a utility blade to cut through any glazing points made of metal and glazing putty when you have removed all the shards. After the glass has been removed from the frame, remove it with care.

Once you have cleaned the area and sanded it to remove any gunk or paint it is now time to get ready for the new glass. Make sure to take measurements of the opening from side to side and from top to bottom. Subtract 1/8 inch from both dimensions to allow for any expansion or contraction of the frame over time. This will ensure that the new glass is properly fitted.

Next, roll a cord of glaziers' compound all around the outside edge of the glass frame joint and smooth it with your putty knife, ensuring that it matches the color to the rest of the window frame. After the compound has dried you can paint it and the new pane with the same colour as the rest of your window.

In order to stop the crack from traveling make an arc of a tiny size using a utility knife just beyond the cracked area. This will slant the crack so that it doesn't grow and allow you to preserve your window's glass and avoid the expense of replacing it altogether.

Although you might be tempted to do it yourself but this is extremely difficult without the proper tools. It is safer and easier to get in touch with a company that specialises in local double-glazing repairs. This will help you save time and money, as well as make sure that your double-glazing is repaired to the highest standards.

Broken seals

A damaged seal can cause windows to lose their insulation properties, leading to drafts and higher energy bills. It also allows moisture and humidity to get into the space between your window panes, leading to condensation and fogging. Foggy windows are an inconvenience and will only get worse if you don't do something about it.

You can prevent the seals on your windows from breaking by having your windows professionally installed, and avoiding cleaning your windows with power. But, even when your windows are in good working order, it's important to get the window seal repaired immediately if you see any signs of a crack like condensation between the glass panes or a noticeable increase in your energy costs.

The window seals are constructed of flexible materials which can be damaged as time passes. This issue is more frequent in older windows, as well as those which have been exposed to sunlight. Window seals can also fail if there are issues with the installation job, such as gaps or uneven frames.

Although it is possible to fix the broken seal on your windows by yourself however, the process could be complicated and can damage other components, such as argon inside the window. It is recommended to consult an expert glazier to inspect your windows and repair any damaged or worn out seals.

After the window seal has been replaced, your double-glazed will perform exactly as it should, shielding your home from unintentional heat loss and cold air infiltration. This will allow you to save money on your heating and cooling expenses while ensuring your home is comfortable.

In the majority of cases, to repair a damaged seal on a window it is required to remove the window from the sash. The old sealant should also be removed. After the window has been cleaned and is ready to be installed, it will be filled with argon before being sealed once more. It is possible to do the job yourself, however it is recommended to consult an expert to ensure that the job is done in a safe and correct manner.

Broken door handles

The handle on the front door of your home is an important part of your security. It opens the door and attaches to a latch set into the slot of the door frame in order to keep it shut. If the handle is loose, this can cause problems opening the door. It could also be a sign that your locking mechanism is malfunctioning.

It is simple to fix a handle that is loose on a door. In most cases you can tighten the screw holding it in place. If the problem is more severe it may be necessary to replace the handle.

To begin, you must wedge your door open using a wedge or stop so that it doesn't shut while you work on the knob or handle. This will help prevent the paint from getting damaged and allow you to access all parts of the doorknob handle without having to worry about the latch.

Next, you'll want to remove the cover plate that sits on the door handle. This might look like a round or rectangular piece of plastic designed to conceal screws for a more attractive appearance. double glazing window repairs of them may have an elongated slot or detent that you can push down with a flathead to release. Then, you'll have to take off the handle's base and remove the screws that hold it in the position.

The cover plate hides most of the screws that hold your door handle or knob in place. After removing the cover plate, you'll be able to easily see all the screws and tighten as necessary. Don't over-tighten the screws, since it could damage the knob or handle. After the screws have been tightened, you can replace the base, and then put the knob or handle on top. Make sure that the holes of the knob or handle line up with the screw holes or detent holes. Check the handle after you're done to ensure it functions correctly.

Chips and scratches

Sometimes, even the best-maintained double glazing can be damaged. It only takes just a few smacks from stray footballs or a sudden blast of wind to cause chips, cracks and dents. They can impact the performance of your windows and doors which then need to be replaced with new ones. It is crucial to recognize the signs of damage and to contact your installer as soon as possible. You can help by providing information about the issue and pictures as appropriate.


It is possible to repair chips or scratches without a lot of difficulty, based on their severity. If a scratch is deep enough to be felt with your finger it is best to get an expert glazier, since they can use glass polish and some elbow grease to eliminate the scratch. They'll also be able to offer some maintenance tips for your windows and doors to keep them in good shape.

Also, you should look out for signs that the gas space between your window panes has sprung an air leak. If you see condensation between the window panes, this could indicate that the inert gasses have evaporated and warm indoor air is now circulating through your home. It is important to contact your installer as soon as you spot this issue, as it may be covered by your warranty.

If your double-glazed window is protected by an assurance, you can claim any repair costs. You may also want to consider switching to a different installer who can be trusted to provide high-quality products and excellent customer service. Look up online reviews, verify the BBB or ask for references from previous customers to ensure that you choose a professional and quality firm. It is also important to inquire about certifications from major manufacturers as well as the Fenestration and Glazing Industry Alliance. This will help you stay clear of companies that are not authorized to install your double glazing.