Why We Are In Love With Double Glazed Window Repair (And You Should Also!) Double Glazed Window Repair

Double glazing is an energy efficient investment that stops heat loss in the winter months and helps keep your home cool in the summer. Repairing your double-glazed windows whenever needed is a great way to ensure they remain in good condition.

Over time, your double glazed windows may suffer from problems like condensation and misting. Double glazed windows may become difficult to open and close.

Broken Panes

A rogue ball or a flying stone from your lawnmower or even a strong storm can shatter your double pane windows which can expose your home to the elements. While a damaged glass window is difficult to repair however, it does not need to be replaced. In fact, the insulated glass between the two panes is in good condition and you can repair your double-pane window using a little DIY effort.

To begin, you'll need remove the broken glass from the frame. This can be a messy job, and you'll want to be cautious to prevent any glass shards from falling on the floor or slipping out of the frame. Use a pair of work gloves to protect your hands and a cloth to protect the area surrounding the broken glass to avoid further damage or breaks. After removing window repair near me broken glass take care to clean the entire frame of the window to remove any sealant residue and debris. It is essential to sand rough areas of the frame to create a smooth surface for your new glazing.

After cleaning the frame after cleaning, you can apply a second layer of glass on the seam where you removed the broken pane. This is the best way to ensure that your window is sealed and protected and will help you save energy costs by stopping drafts and water from entering your home. Next, you will need to choose the right glazing material. There are a variety of options, including clear tape, which is a bit more robust than regular tape and will help keep your window from further cracking, as well as glazing film that is similar to clear plastic wrap. The advantage of this choice is that it can be painted to match the frame you have and will keep out rain and snow as well.

No matter what material you choose, it's important to press the glazier's points into the place where the putty joins your frame. They will help hold the new glass in place and help it stick to the frame. Glazier's points can be found in hardware stores, and are available in pre-made ropes which you roll out onto the frame rabbets.

Condensation

Double glazing can be prone to condensation issues and if you encounter this issue, it is recommended to contact the company that supplied the window. Many companies offer warranties and guarantees to provide coverage for the problems. Condensation and fogging in the panes of glass is an obvious indication that the seals between your windows are damaged and must be repaired by a professional who will fix both panes.

It's a difficult procedure that requires specialized tools to remove and replace the old window. A professional can handle this task and supply the equipment. Making use of these tools can be dangerous it is best to leave this kind task to a professional.

If you choose to do this yourself, make sure you wear safety glasses and gloves to shield yourself from any broken pieces of glass that could fly off during the process. It is important to remove all putty or metal glazing points from the grooves that will be receiving the new window. You should also wire-brush the frame and vacuum or wipe with a damp cloth. Once the frame is dry and clean you'll need to get a replacement glass which is 1/8 inch less in each direction than the existing window and test-fit it in the grooves.

You will have to apply a layer of silicone caulk in the grooves of your frames to ensure that the glass you are installing is properly installed. After the silicone caulk is dried you can smooth it out and make any necessary adjustments. The wood molding can then be reinstalled.

If the weather abruptly changes, double-glazed windows could become difficult to open or close. Extreme temperatures can cause frames of double-glazed windows to expand or contract, causing them to slide and become stuck. If this is the issue you could try wiping the frames down with water and lubricating the joints. However, it may be best to contact the company who installed your windows for assistance.

Misted

Misted Double Glazing is a window problem that develops when moisture gets trapped between the glass panes of your double-glazed windows. Double glazing consists of two glass panes that are separated by an insulating space, typically filled with argon gas for increased thermal efficiency. This creates an airtight seal that keeps warm air inside and cold outdoor air outside, allowing you to keep your temperature comfortable in your home.

As time passes, the seal can break down and moisture will start to accumulate between the windows, causing them to turn misty. This occurs because the sun heats the gap between panes of windows, causing water to vapourize.

It is a natural phenomenon however, if it happens between the panes of the window it can be a problem because it will no longer be able to control the temperature inside the room. Instead the temperature outside the window will affect the temperature indoors. Northfield Glass can help you if your double-glazed windows start to mist.

We can replace a single blow sealed unit, without the need to replace the entire window. This is far less disruptive than a complete replacement. Our misty glass repair consists of removing and cleaning the unit of glass and replacing it with a new one. This will result in an airtight seal again.

Some companies in the field claim that they can inject chemicals through holes into windows that have been misty to eliminate the fog and condensation. We do not recommend this method. This is not only ugly, but it can also damage the toughened glass and leave you with a window that does not completely perform the function it was intended to.

It is important to fix the problem as soon as possible, as left untreated it can cause mould growth that not only damages the window but can also pose health risks to your family members. Moisture can also cause other issues within your home, such as dampness or rot. In certain situations, it may be necessary to replace the entire window.

Blown or failed

Modern double glazed windows have two glass panes with an inert gas or air in between them. This improves their thermal efficiency, keeping the cold out and heat in. As time passes, the gas can become depressurized, causing many issues.

Condensation in between the panes is among the most frequent. It's not a sign of a window failure, but it could indicate that you should replace the windows. Condensation can also be a sign of a broken double glazing that will require a re-installation.

Double-glazed windows may also cause drafts. This could be because of the seal being damaged, a broken handle, or a broken lock. A draught can be quite obvious and result in more expensive heating bills Therefore, it is essential that you get this fixed sooner rather than later. You can test the seals by feeling around the edges of your window frame to see whether you feel cold air.

Another indication that the seals on your windows have failed is when you begin to see water dripping on the inside of your windows. This is a sign that you need to reseal the double glazed windows.

Your window frames are designed to move a bit as they have to do to keep the glass sheets in place. However, over time, this particular packaging material will become compacted and this will break the all-important seal. This allows air to flow between the panes and reduce the efficiency of your window.


A damaged seal is a clear sign that your double glazing is damaged and must be fixed as soon as possible. A damaged seal can stop your double glazing from fulfilling its primary function of keeping cold out and warm inside. A damaged seal could let moisture into your home, which could result in mold and other unpleasant conditions. Contact a double glazing expert immediately you spot a damaged window seal. They can replace the entire unit.