Five UPVC Window Repair Lessons From The Pros uPVC Window Repair

Although uPVC windows are tough and resistant to harsh weather conditions they are not immune to issues that require fixing. Luckily these problems can be repaired easily at less than the cost of replacing windows.


It is normal for a window to be difficult to open since its hinges are stiff. Fortunately, this problem can be fixed by lubricating the hinges with something like WD-40.

Cracked or Broken Glass

We have glass all over our homes; in doors, windows, surfaces and tables, the front of stoves and microwaves, and even in picture frames. Windows can break because of a well-hit ball or rough-housing between friends. They must be repaired before they worsen. Fortunately, these kinds of cracks are simple to repair without the need to replace your window glass or frame.

To begin, clean the area with a damp cloth to get rid of any dust, dirt or fingerprints. Use a small amount of epoxy to seal the crack. Allow the epoxy to completely dry before moving the window. This is a simple repair that can save you the expense of replacing your uPVC windows.

The gasket on the window can become soft or even separate from the frame. This will lead to a loss of insulation, and also the introduction of cold air or water into your home. This can be easily fixed by using the flat blade of an ATM card to cut the gasket from the frame of the window. If you have a little bit of time on your hands you could also apply a little more epoxy over the crack to make it look like the crack did not exist in the first place.

If the crack is larger than you are able to reach with your fingers, you can use tape to block off the area from further damage. You could also use clear nail polish as a filler to stop the crack from spreading. It is important to act quickly when you notice the crack. If you don't, it could spread and become more difficult to repair.

If you're looking for a more permanent fix, use uPVC epoxy. It is the most time-consuming alternative, but it will give the most effective results in terms of durability and appearance. Follow the manufacturer's instructions to apply the epoxy, and make sure to clean up the surface with a rag dampened with acetone after it has dried completely.

Water Leaks

uPVC windows are long-lasting However, they require some attention and care. They can cause a myriad of issues if not maintained correctly. These issues can range from leaking water around frames, or condensation inside glass units.

A uPVC window specialist can help identify the issue and resolve it. They can also provide suggestions on how to avoid it occurring again in future.

Leaking uPVC Windows can be a major problem and should be addressed immediately when they happen. If the issue isn't treated, it could lead to major damp problems in your home. This could lead to expensive repairs and an increase in energy efficiency.

In most instances, a leaky uPVC window can be fixed by applying a leak patch. This is a sealant that is applied to the inside of the window and will stop water from entering your home through the damaged region.

Cloudy or misty double-glazed units are a sign that the seal between the glass panes has failed. This could be due to many reasons, such as age, weather conditions or even wear and wear and tear.

You can prevent this by keeping your windows cleaned regularly. It is recommended to clean windows at least twice a year using a white cloth soaked in warm water and liquid soap. Avoid using colored cloths, since they can leave stains of dye. For stains that are difficult to remove it is recommended to use solvent PVC cleaner. It can be bought at any hardware store. It is easy to use. Remember to wipe the window frames in a shaded space away from direct sunlight to prevent any streaking.

Faulty Hinges and Locks

Over time a window hinge can become damaged or bent out of shape. This can lead to an opening in the frame, which can let draughts in and decrease energy efficiency. A draft can also make your home feel cold and uncomfortable, and increase your heating bills.

A gap in a uPVC window is an issue which can be addressed easily. A uPVC window repair specialist can identify the issue and fix it. A small hole can usually be fixed with carpenter's glue and a wooden dowel that is inserted into the gap. The dowel must be placed in a way that it is flush with the hinge leaf and has a smooth surface to it. The adhesive of a carpenter is spread on the dowel, and then tapped to secure it. Once it's dry, a screw can then be installed into it to secure the hinge leaf.

UPVC window hinges or locks may become stiff with time due to general wear and tear or due to blockages caused by dirt or other debris. They must be cleaned and inspected frequently to ensure that they're working properly. Use WD-40 to keep moving parts in good working order.

It is recommended to wash UPVC windows at least once a year. The damp cloth should be dipped into the mixture of water and mild detergent. To prevent rust and dirt cleaning the the corners more often.

The handle of a uPVC window can also become stiff when opening or close. This is a possibility when the handle is thrown or if there are problems with the locking mechanism. This is usually a simple and simple fix and can be accomplished by the homeowner themselves by following the steps.

A damaged lock poses an issue for security, since it could make your home vulnerable to burglars. A damaged lock could make it difficult to open your uPVC door or window and could cause trouble for you. If this is the case you may require a new handle or to adjust the multipoint locking system.

Stuck Handle

When your upvc handle becomes stuck and becomes inoperable, it can be very frustrating. Especially when you try to open your windows and discover that it requires a lot more force or simply does not open at all. RepairMyWindowsAndDoors is usually due to a wire that sits inside the handle holder, and has become rough. It is usually possible to fix the issue by pulling the handle out to examine the wire.

Another method of getting this solved is to use an lubricant made of graphite or paraffin on the pole sliders, which allows the handle to move upwards and downwards. This is also a good time to give your handle a good clean as this will help prevent any further issues related to it.

If the problem is related to the push button itself, it can be fixed by using superglue on it. Make sure that the glue is completely dry before attempting to use it again. If the handle is completely damaged or broken it can be repaired by ordering a new one and then screwing it into the right place. This is a far simpler repair than replacing the entire window frame, and is something you can do yourself, especially if you have access to the right tools.