Speak "Yes" To These 5 UPVC Window Repair Tips uPVC Window Repair

Although uPVC windows are hardy and resistant to harsh weather conditions they are not immune to issues that require fixing. Luckily these problems can be repaired easily at a fraction of the cost of replacing windows.


It is normal for a window to be difficult to open because its hinges are stiff. This can be resolved by lubricating hinges with WD-40.

Broken or cracked glass

Glass is everywhere in our homes: on doors, windows and tables, in microwaves and stoves even in frames for pictures. A well-hit baseball game or rough-housing with friends could leave your windows with cracks that need to be repaired promptly before they get any worse. These kinds of cracks can be easily repaired without having to replace the frame or glass of the window.

First, clean the area using a moist cloth to get rid of any dust, dirt or fingerprints. Then, apply an amount of epoxy to close the area around the crack. Let the epoxy dry completely before moving your window again. This repair is very simple and will save you money replacing your uPVC window.

The gasket on the window can be brittle or split from the frame. This could lead to loss of insulation and also the introduction of cold air, or even water into your home. This can be easily fixed by using the flat blade of a bank card to separate the gasket from the frame of the window. If you have the time, you can add a bit of epoxy to the crack, so it appears as if it has never existed.

If the crack is more than you can reach it with your fingers, apply tape to block off the area from further damage. You can also apply clear nail polish to fill the crack and stop it from getting any bigger. It is important to start this process when you first notice the crack, otherwise it will soon spread and become more difficult to repair.

If you're seeking a permanent fix, consider uPVC epoxy. This is the longest and most labor-intensive of the alternatives but it will yield the most effective results in terms of strength and appearance. Follow the manufacturer's directions for applying the epoxy and be sure to spruce the surface with an acetone-soaked rag when it has fully dried.

Water Leaks

Upvc windows are extremely robust, but they do require some maintenance and attention. If they're not maintained correctly there are a variety of issues that could develop. These issues can range from water leaking around the frame to condensation within the glass units.

A reputable uPVC window repair specialist can assist in identifying the issue and then fix it. They can also give suggestions on how to prevent it happening again in the future.

Leaking uPVC windows can be a significant problem, and it's essential to fix them promptly. If not addressed, the damage could cause serious damp problems to your house, which can lead to expensive repairs and a reduction in energy efficiency.

In a majority of cases, a leaky uPVC window can be repaired with a simple leak patch. The sealant is sprayed inside the window to block water from getting into the home through the damaged area.

Double-glazed units that appear cloudy or misty could be a sign of a leaky seal. This could be due to a variety of reasons, including wear and tear, aging, weather conditions or simply aging.

One way to avoid this is by having your windows cleaned regularly. It is recommended that you clean your windows at a minimum of twice each year using a white soft cloth immersed in warm soapy water. upvc window repairs near me is important to stay clear of using any colored cloths since they can leave dye stains on the plastic. For stains that are difficult to remove it is recommended to employ solvent PVC cleaner. This can be purchased at any hardware store. It is simple to use. To avoid streaks, wipe the window frames off of direct sunlight in a shaded area.

Incorrectly installed hinges or locks

Over time a window hinge may break or bend out of shape. This can lead to a gap forming in the frame, which can allow draughts in and reduce the efficiency of energy. A draught can also make your home feel uncomfortable and cold and lead to increased heating costs.

A gap in uPVC is a problem that can be easily fixed. A uPVC window repair specialist will be able to pinpoint the problem and fix it for you. A small hole can usually be repaired with carpenter’s glue and a wooden stick that is inserted into the gap. The dowel must be positioned in such a way that it is in line with the hinge leaf, and has a smooth surface. Then, the glue of a carpenter is spread over the dowel of wood and tapped into the position. When it's dry, it is possible to screw put into it to fix the hinge leaf.

UPVC window hinges or locks can become stiff with time because of wear and tear or due to blockages created by dirt or dust. They must be maintained and cleaned regularly to ensure they're working properly. A lubricant, such as WD-40 is recommended to keep the moving parts in good working order.

It is recommended that UPVC windows should be cleaned at least twice a year. This can be done using a damp cloth that has been dipped into a mixture of mild soap and water. The areas around the corners of the window need to be cleaned more frequently to keep dirt from accumulating and corrosion.

It can also be difficult to open or shut the handle of a uPVC windows. This can happen when the handle is thrown or if there is a problem with the locking mechanism. It is usually a quick and easy fix and can be done by the homeowner themselves if they follow some simple steps.

A faulty lock is an issue for security, since it can make your home vulnerable to burglars. A faulty lock may also make it difficult to open your uPVC door or window which could be a trouble for you. If this is the case, you may need a new handle or to adjust the multipoint locking system.

Stuck Handle

It can be quite frustrating when your upvc window handle is stuck, especially when you attempt to open the window and it requires an enormous amount of force or won't open at all. This is caused by an electrical wire in the handle holder that has become rough. It is possible to solve the issue by pulling the handle out to examine the wire.

You can also address this issue by using graphite or paraffin on the pole sliders. This will allow the handle to move up and down. It's also an ideal time to give your handle a thorough clean to avoid any future issues with it.

Superglue can be used to fix the button if the problem is the actual push button. Make sure that the glue is completely dry prior to attempting to use it again. If the handle is damaged or broken, it can be replaced by ordering a replacement and then screwing it into place. This is a far simpler repair than replacing the entire window frame, and is something you can tackle yourself, especially if you have the right tools.