The No. One Question That Everyone In Ghost Immobiliser Install Should Know How To Answer Why Should You Have a Ghost Immobiliser Installed?

Autowatch Ghost is an advanced car immobiliser that shields your vehicle from theft. It operates quietly by connecting to your car's CAN data networks and requires a unique, PIN code that can be changed to be entered in order for the vehicle to start.

The system is silent, does not have LED indicators and is unreadable with diagnostic tools. It is also TASSA-approved, and recognized by certain insurance companies.

No Key Fobs, LED Indicators

A ghost immobiliser is a groundbreaking innovation in car security is able to stop thieves from driving even if they enter your vehicle. It connects in silence to the CAN data circuit onboard your vehicle, which means there are no radio signals involved. This makes it difficult for thieves to bypass it. It is also unnoticeable by diagnostics and does not have an LED indicator to give away its location. bmw m4 ghost installer makes it a good choice for vehicles that are costly or rare, like antique cars.

Autowatch Ghost is a small device that is able to be hidden within the vehicle's loom. This makes it nearly impossible for thieves or other intruders to find it. The device is connected to the CAN system and then connects to the ECU (Engine Control Unit) to deter theft. It is extremely easy to install and can be installed within less than an hour. It's also less intrusive than some other physical security devices, like steering wheel locks.


The device is built on the same technology as GPS trackers, however it stops theft by stopping the vehicle from getting started. It uses buttons in your car to generate a unique, changeable PIN code that must be entered to operate your vehicle. The device can be programmed to use obscure buttons, such as those on the back of the rear demister to make it more difficult for thieves to figure out the PIN. This kind of technology is becoming more popular, and many insurance companies are now requiring it on cars that have keys-less entry systems.

Another benefit of the Ghost is that it blocks key-cloning and hacking. The device is connected to your vehicle's CAN bus, and it uses the buttons to generate an unique code that is able to be changed. The code has to be entered to begin the vehicle. It cannot be defeated by simply putting in new keys or by changing the ECU. The criminal will have to use a special device to bypass the immobiliser.

The ghost immobiliser can be bought at a bargain cost and is it can be paired with GPS tracking to ensure the security of your vehicle. It's a great choice for older vehicles and will help you save money on insurance cost. Contact Trackershop to request an estimate on a ghost immobiliser. We'll add the installation into the price, so that you can feel confident regarding the security of your vehicle.

It is TASSA Approved

If you're trying to secure your vehicle, an immobiliser is the best option for it. It can disable features such as the starter motor or the fuel pump in the event that the PIN code was not entered correctly. It is essential to have an immobiliser installed by an expert. Installers should be TASSA-approved, as this will ensure that the product is safe to use and operates correctly. The process involves checking the credentials of the installer, which includes a criminal record check and a identity check.

The Ghost immobiliser is the most recent solution to prevent thieves from taking your vehicle. It connects to the CAN data network in your vehicle and works without the need for additional fobs or alarm systems. The system operates silently and is not able to be identified by car trackers. It utilizes the buttons on your steering wheel, door panels, and centre console to create a unique PIN sequence. It is important to enter the correct sequence to start your car. This makes it very difficult for thieves.

This innovative immobiliser has been accepted by TASSA and is available for installation at Trackershop. They are experts in the installation of this device. It also offers a range of other security products for your vehicle, including an anti-theft tracker as well as a remote car starter. The team of technicians is able to install the device at your office or at home.

It is important to protect your vehicle as increasing numbers of vehicles are being stolen with keys of the owners. Modern keyless cars are particularly vulnerable, as cloning equipment and door lock pick sets are readily available on the internet. An Autowatch Ghost can help to stop this from happening, since it can't be detected by thieves or snatched by a vehicle tracker.

The Ghost II CAN immobiliser is completely hidden, and is unable to be altered by thieves. It is able to detect attempts to modify the ECU and will shut down parts of the engine in an attempt to deactivate the immobiliser. Additionally, it could even deactivate the car alarm to prevent the attention of thieves and allow them to escape from the vehicle.

Reversible

The Ghost immobiliser is a adjustable security system that can be removed and installed at any time. It is directly connected to your vehicle's CAN (Controller Area Network) and offers protection via a unique PIN code, which is a secret sequence that only you will know. Once the PIN code is entered correctly, the vehicle will not start and thieves are discouraged from attempting to steal it.

The installation of the Ghost isn't invasive and your vehicle's warranty will not be affected. The system is also compatible with any other aftermarket alarm or tracker you may have installed. Furthermore, it does not leave any trace on the interior or exterior of your vehicle. Unlike other immobilisers, it does not employ LED indicators or key fobs, making it impossible for thieves to detect it.

Gangs of organized car thieves are currently using devices to read circuit wires in vehicles, but the Ghost Immobiliser does not use any of these methods. Instead, it utilizes buttons located on the dashboard or steering wheel to allow you to set the unique PIN code sequence. The code must be entered to start the vehicle.

In addition, the Ghost Immobiliser is also able to safeguard your vehicle from OBD port hacking. This kind of theft has become more common, and it is one of the most difficult ways to stop. The Ghost Immobiliser helps prevent these thefts because it prevents the burglar from connecting a laptop into the OBD port of your vehicle and cloning keys.

The Ghost can be used conjunction with a vehicle tracker. This can be very useful in locating your vehicle after it's been taken. It is not recommended to use a tracker for your primary security measure against theft since they do not stop theft. They are also much simpler to identify and remove from vehicles than the Ghost immobiliser.

Easy to install

A Ghost immobiliser, which is a revolutionary technology that can help protect your vehicle from theft. It connects to your vehicle's CAN (Controller Area Network) system and generating an unique code sequence that is impossible for thieves to crack. It's a cost-effective and highly effective method to keep your car safe from being stolen.

Ghost is designed to work with all vehicles and models, including those with aftermarket key fobs. The device uses the buttons on your steering wheel, dashboard, and central console to generate an unique PIN code sequence that stops thieves from starting your vehicle. It comes with a variety of other features, such as a GPS tracker that can locate your vehicle.

Many drivers opt for this kind of device because it offers protection against a variety of vehicle theft. It's easy to install, operates silently, and doesn't use radio signals. It's also a good option for those who don't want to buy a complete alarm system. It is, however, essential to get a professional to install the alarm to ensure it functions properly.

It is essential that you have a professional install your ghost immobiliser in order to ensure it functions as it should. A professional will know the ideal location for it, and will also make sure that the unit is properly connected to your vehicle's electronic components. The installer will also make sure that the device is kept from view and can't be observed by anyone without an underlying reason to know about it.

The Autowatch Ghost II can be set to Valet/Service mode, which allows you to drive your vehicle at 30 mph without having to use the access key. This makes it perfect for valet parking or moving your car. This mode is available even if your vehicle is being repaired by dealers. This mode can be turned off using the companion app, and then reset after each usage.

The Ghost is the only aftermarket CAN-bus immobiliser that does not require cutting wires. It connects directly to the onboard CAN system of your vehicle. It is not able to be detected by devices for diagnosing or cloning. It is tamper proof, silent, and doesn't emit any radio signals. It is also reversible, permitting you to transfer it to another vehicle if necessary.