3 Common Causes For Why Your Replace Upvc Window Handle Isn't Performing (And The Best Ways To Fix It) How to Replace a UPVC Window Handle

If the window handle of your upvc has broken then you might be looking to replace it. This is fairly straightforward and will usually cost between PS5 and PS10.

To begin, you'll have to open the window handle to ensure it is locked and open. Take off the cap from the screw. This is usually above the handle, but often below it too.

Determine the length of the Spindle.

The process of changing the window handle is not difficult however it is crucial to make sure that you have the correct tools and take your time. It is also essential to know what kind of uPVC handle you have and determine the length of the spindle so that you can locate the appropriate replacement.


Typically the uPVC handle is fitted with an attachment screw that binds it to the frame of the window. This screw can be removed using an electric screwdriver. However, you must take care not to harm the locking mechanism. It is a good idea to make use of an electric screwdriver in order to prevent this from happening.

After removing the screw you'll be able to remove the old handle. After that, you can replace the handle and make sure that it is correctly aligned with the wedge block. It is also important to check that the new handle will close tightly to help to protect your home from intruders.

There are a number of different kinds of uPVC handles including inline Espagnolette handles as well as tilt and turn handles. These handles are designed to open windows that can be opened by turning them or tilting them. If you are replacing the tilt and turn handle, you need to check the spindle length before buying one since different handles have varying sizes of spindles.

The easiest way to determine the type of handle you have is to look at the base of it. A snap-in cover is over the screw that holds the handle's base in place. You will then be able to see the screw that holds the cockspur.

If you know the type of handle you have, it is easy to choose the replacement. You are likely to find the same type of handle at a local hardware store or on the internet. It is important to keep in mind that the handle you select might not be exactly the identical to the one you currently have. You should also consider the spindle size of the replacement handle to ensure that it fits into your window.

Remove the handle that was previously used

If you've noticed that your window handles are starting to lose their grip or are becoming difficult to turn, then it might be time to replace them. Fortunately, this is a relatively simple process and can be accomplished in only two steps. If your windows are uPVC or a traditional style you can easily put in new handles. There are also a number of different types of handles and lock mechanisms, so it's important to choose the right one for your home.

The first step is to take the handle from your window. This can be done by locating and taking off the screw covers at the base of the handle, then using a screwdriver to take out the screws holding the handle in position. Be careful not to break the handle or damage the frame when removing it from the window.

The spindle bar can be found at the back of the handle. It is usually fixed by two screws that can be removed with either a screwdriver or pair of pliers. Once the screws have been removed, you can remove the old handle from the window frame and also the locking mechanism.

After removing the handle, you'll have to locate a replacement handle with the same spindle length. Choosing the right one will ensure that it fits properly and that your windows are secured. If you're not sure which size handle you should purchase take a look at your current handle to see which type it is. There are many different kinds of uPVC window handles, including handles that are inline with espagnolette, cranked espagnolette handles, and tilt and turn uPVC handles.

Inline espagnolette handles are equipped with a 7mm square spindle, and can be opened in the right or left-hand position. The same fixing centre is used for both turn and tilt uPVC handle types, but the blade design differs in either an angled or flat. Cockspur handles have long noses that latch on either the outer frame or transom bar cross members. You can replace them with cockspag blocks which are available in the exact same dimensions as the standard uPVC handles screws.

Install the new Handle

Over time, uPVC handles can become brittle and weak due to continuous usage and exposure to elements. Slamming or forcefully closing the handle can also result in strain and stress and result in the breaking of the mechanism. Fortunately, there are a variety of simple fixes that can restore the functionality of the handle.

If the problem is related to the screws that hold the handle the first step is tightening the screws. To tighten the screws, use the screwdriver. Be cautious not to tighten too much as this could damage the handle. It could be necessary to replace the screws too in the event that they have been damaged or stripped.

In many cases, the handle will break if it isn't properly aligned or fixed to the window frame. In this instance you can simply replace your handle. This is a relatively easy process that should only take you a few moments to complete.

The screws that hold the handle in position are usually placed either below or above the handle. They are usually situated between the handle and the ceiling and are secured by caps made of plastic. Remove the caps and use the screwdriver to loosen either the top or bottom screws holding the handle in place.

Once the screws are removed and the screws are removed, you should be able to pull the handle away from the window mechanism. This will reveal the spindle which is a metal bar that fits into the handle and into the window lock mechanism. The spindle will need to be replaced if it's broken.

Next, you will need to replace the handle. Begin by placing the handle on the glass and then marking the location with a pencil. Then, insert the screws into the marked holes and tighten them manually at first. Tighten each screw gradually to ensure that the alignment is correct without damaging the handle or the window frame. Then, test the handle to ensure it is working smoothly and locks securely.

Test the Handle

When you're trying to open or close your windows, it's crucial that the handle operates smoothly. It could be time to change your window handles if they are not locking properly or are loose. Luckily, the process of replacing windows made of upvc is simple and straightforward.

On uPVC double-glazed Windows there are numerous types of window handles. There are various types of handles that are suitable for double-glazed uPVC windows. Each of these handles serves an individual purpose and function however, all are designed to provide high levels of security.

It is important to identify the root of the issue before you can buy a new handle. If the handle is loose, it could be due to various factors. In some cases it could be that it needs to be tightened. In other instances, the problem could be more serious and require assistance from a professional. If this is the case, seek out a uPVC window specialist to get expert advice.

The issue could also be caused by a lack of maintenance or general wear and tear. If white window handles seems a little looser, it could be because it was shut and opened often. You can tighten the screws by using the help of a screwdriver in these situations.

If the issue is more severe it's likely that there's a blockage or an internal defect in the handle. Most uPVC handle problems result from internal cracks that hinder the handle from interacting with the spindle locking system. If this is the case you should seek out a uPVC professional or a handyman from your local area to ensure that your window is fully functional and safe.

After you've changed the handle, it's a good idea to check it out to ensure that it operates efficiently and securely. You can do this by opening and closing the window several times to make sure it opens and locks easily. It's also a good idea to lubricate the handle and lock mechanism often to ensure it is operating smoothly.