15 Of The Best Pinterest Boards Of All Time About Repairs To Upvc Windows Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good repair.

For single pane windows it is fairly easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. However, if windows with double panes are held in place by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

If you are going attempt to remove the window panes by yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric, not onto the floor which could cause them to be trampled.

It's a good idea to cover the gap with tape after the glass has been removed. This will keep drafts and water from entering your property until a professional arrives to repair the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the distance between the door and the window is significant, you may prefer a security screen that also includes an opening. This will provide the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can develop a number of problems such as sagging. A sagging uPVC window could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from getting worse.

To fix a sagging window you can try repositioning the hinges. To do this, you'll need open the window so that you can get to the frame. Then, you can remove the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you have moved your hinges. If you are happy with the fit of the window, tighten the screws to hold them in the right position.

If you can't reposition the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to loose their elasticity. It is essential to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen. Most often it is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and then perform an experiment fit. The corner joints of the sash should be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

It is essential to take action if get up each morning to find a smoky wall and floors that are wet. Windows that leak water do not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on how severe the issue is, old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repair s, do not be tempted to apply too much caulk and then make the area harder to clean and can reduce the efficiency of your energy.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious instances, you may need to think about replacing the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leakage originates from the glass in your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. It is also possible to be repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with ease It could be hinges at fault. They can be replaced by any competent DIYer and can be completed in just a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It's easy to replace a hinge on a window but it's much easier if someone helps hold the frame.

Verify that the uPVC hinges are open and closed in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The problem can be caused by opening the window incorrectly or by a poor installation at the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to offer suggestions.

It is also essential to grease the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It can also prevent corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts


Draughts can be caused by a variety of different things. First, the hinges because of wear and tear, may become displaced, which can cause gaps to develop where the sash joins the frame. They can be fixed by giving them a good clean, but if they are beyond repair it may be necessary to get them aligned or replaced. The interlock, which is located on the hinge side of the window, can be misaligned. Again, it is feasible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce draughts.

One of the most effective ways to reduce the draughts in your home is to use a draught excluder. These are typically fabric tubes that are filled with some kind of filler. They can be placed on the windowsill on top. They will help block out cold air and keep your home warm and cosy!

With a little regular maintenance and repairs, your upvc windows will continue to provide a great level of security and insulation for your home. It is essential to remember that all windows will eventually wear out and it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your Upvc windows, it is always recommended to seek help from a professional immediately.