15 Interesting Facts About Windows Repair You've Never Heard Of How to Get Your Windows Repair Done Right the First Time

Cracks in your windows can result from a violent storm, lawnmowers hurling rocks or a collision. window repairs near me may be able to make do with a few temporary fixes until Mr. Handyman from Anne Arundel and North PG professional can come to fix the damage.

A clear packing tape or masking tape can keep superficial cracks, like spider cracks, from worsening. Be sure to tape both sides of the crack.

Rotted Frames

The rot of wood around windows isn't just a visual nuisance and a risk to your safety It also lowers the insulation value of your home. Rotted frames allow cold air to enter your home, and warm air to escape, costing you money. The reason for this is that the decaying wood allows moisture to penetrate and deteriorate the inner frame, decreasing its capacity to keep cool or warm air inside your home.

In addition, a weakened window frame can leave your home vulnerable to intruders who could easily penetrate the window to access the inside of your home. Rebuilding and repairing your wooden windows can prevent this kind of damage, making your home more secure and attractive.

If your window sills and frames start to get rotten, it's crucial to repair them immediately before the issue gets worse. The first sign of rot is usually visible cracks or discolorations of the paint. The more advanced signs of rotting may include a soft feel to the wood, or a buildup of mold on the inside of your window frames.

It is crucial to speak with an expert when you spot any of the above issues. Wood rot is a fast-growing issue, so the sooner it is addressed, the cheaper and easier it will be to fix. If you put off addressing it until all the wood is rotting away it will be impossible to repair.

In 95% of cases frames and sills that have rotted are repairable if the rot is detected early enough. Our experienced and skilled technicians can repair or replace the damaged areas of the frame, leaving you with windows that look as fresh as new.

Muntins and Mullions

The muntins and mullions that separate your window panes aren't just ornamental they also serve to support the glass. They are a typical part of windows that can be damaged or even broken. It doesn't matter if they are fake, real or both, If your mullions, muntins, or mullions become chipped, cracked, or scratched, it's important to have them fixed. They can make your home look less appealing.

Muntins & Mullions

Although they might appear similar, and are often confused (perhaps the alliteration can be helpful) muntins, mullions and mullions are two distinct components of a window. To avoid confusion and confusion, a reputable window installation company will clarify the differences between these two components.

Mullions, also known as partitions between glass panes are a typical component of traditional multi-pane windows. Historically, they were used to support and separate large sheets of glass. Nowadays, they are an ornamental and design element that gives a timeless look to your home.

Although mullions may not be the most durable part of your window, they do offer some security. If a burglar is able to break the window and breaks it, he'll likely break the mullion in order to gain access to your home.


Putty can be used to repair damaged mullions or muntins. Window repair experts clean the surface, apply new putty, and re-secure them in place. This is a simple repair that won't alter the window's functionality.

There may be an issue with the frames or sashes if the windows leak or don't open and close properly. Some sashes become stuck in the frames because of broken springs or cords. The sashes might also be too heavy or they may have fallen off the track. Balanced springs and weights can help a sash that is difficult to lower or raise.

The wood strips that hold a single sheet of glass in place on an older window are referred to as muntins or mullions. If they begin to rot and need to be replaced, they should be replaced. Window repair specialists can replace the rotted muntins or mullions, and they won't hinder the function of your windows.

One of the most frequent issues with old windows is the sill, which may not slope enough downward to let water drain away. Examine the sill to ensure that it is sloping away from the house. If it doesn't it is possible to install a new drip cap. can be installed. It's a simple task that will drastically minimize the possibility of moisture infiltration.

Sashes

If window sashes don't function correctly it's time to take a closer look at the situation. The weather and time can have a direct impact on wooden window sashes. If they are not opened properly, water or air can enter the room quickly. A similar event can cause aluminum sashes become unsuitable. A dampness or shivering around the windows are common signs of these issues.

The most common cause for problems with sash is simply wear and tear. They can be corrected by filling and sanding the area before re-painting. However, more serious issues will require disassembly of the sash. This task should be left to a professional window repair company.

The disassembly of the sash starts by taking the locking pins off the top of the window frame, and taking off the sash cords. Then, remove the parting beads (vertical strips that hold the upper window sash). Then remove the upper window sash. When the sash is completely free, you can remove the hardware that holds it and put it in a safe location.

The mortise-and tenon joints are held together by wooden pegs. Take the pegs off using pin punches and hammers. The pegs tend to be larger on one side than the other. Remove the pegs from the shorter end to avoid damaging the sash.

There are pockets where glass panes are secured once the sash has been completely disassembled. The pockets are usually secured by a screw or pin. They should be gently prised with a sharp blade.

Once pockets are removed, the sash is then able to be put in a new glaze compound. The artist beds the sash by placing it against an easel, and then working the compound into the groove, or rabbet, around the pane opening. After the sash is dipped, it is left to dry for two days before being reassembled. The sash will then be treated with homemade wood preserver made using a mix of mineral spirits and boiled oils from linseed. This will decrease the amount of that draughts are emitted, and increase the capacity of the window to be shut and opened.

Drip Caps

Drip caps are simple, virtually invisible caps that redirect rainwater away from window frames during a storm. They are typically made from wood, but could also be constructed of bricks or other masonry. Some drip caps have an attractive appearance, while others are more utilitarian. A good quality drip cap will be able to resist the elements and keep water from getting into casings where it could cause wood rot.

A drip cap can be easily installed by a homeowner using a few basic tools and a bit of knowledge. Many homeowners prefer hiring a contractor to install their drip cap. A drip cap should be nailed to the sheathing around the window at least one inch from the trim board, and it should slope away from the window. Use galvanized nails, and apply a high quality exterior grade sealant on the underside of the drip cap and sheathing.

Drip caps are available preformed from most home improvement stores and window stores homeowners can make them at home using a sheet of aluminum with a vice and a few simple tools. To make them the homeowner should first remove or pry off the siding that is above the window and then cut the drip cap to a length slightly larger than the window. After the drip cap is cut, it is slipped beneath the flashing tape and secured to the sheathing using galvanized nails. The cap should be nailed on both ends and firmly fixed to the sheathing.