Responsible For A Patio Door Locks Repair Budget? 12 Top Ways To Spend Your Money Patio Door Locks Repair

The security of your home is dependent on the locks that are installed on your patio door. If they're not functioning correctly, you could put your family and belongings at risk.

It's simple to fix patio door lock issues with a few simple steps. This quick fix involves cleaning and lubricating the lock.

Check the Lock

Patio doors are an important security feature and they need to work efficiently to keep burglars and the elements at the door. Wear and tear, extreme temperatures, and dust can cause the door frames, hinges and locking mechanisms to fail. It's important to be proactive and regularly check your sliding doors for damage and make any repairs that are required.

The most frequent problems with patio door locks include difficulty locking or unlocking them, a latch that is stuck and keys that don't rotate smoothly. You may have to adjust the mechanism of your lock or tighten screws depending on the issue you're experiencing.

If your patio door lock is stuck in the open position and you're unable to get it out Try using a flat head or credit card. If none of these options work, contact a professional locksmith who will assist you in opening the lock on your patio door without causing damage to the frame.

The mortise lock that is used on sliding uPVC patio door is usually an cylinder and handle that secures the lock. The locks are relatively secure, but they can be susceptible to breaking or breaking under the pressure of a door that is slammed. It's a good idea to check the mortise lock and handle for signs of wear, like bends or scratches, before it is broken and you must replace it.

It's also a good idea to know the dimensions and position of the current lock by taking a photograph with your digital camera. This will allow you to communicate these details to a vendor when you're looking for a replacement lock. This will ensure that you get an appropriate lock that will fit your door and is compatible with the current mounting setup. If not, you'll face a difficult time trying to install a new lock that's not compatible with the current hardware. This could lead to further problems in the future.

Clean the Lock

Patio doors are the most common entry point into a home, and are therefore the most frequent target for burglars. It is therefore essential that your patio door lock is fully functional and meets Police & Insurance Standards.

There are a few simple steps you can take to fix a lock that won't cooperate. If you have to re-align the patio door and clean the lock or even replace it, these four simple steps will ensure that your doors function correctly and offering the level of security you're looking for.

You should first clean the lock with hot soapy water using a damp cloth. RepairMyWindowsAndDoors want to wipe away any stains or dirt that may have accumulated on the lock. Once you've done this, you can use a dry cloth to get rid of any excess water and allow the lock to dry completely before attempting to re-insert it.


Next, you need to ensure that the lock is properly lubricated. This is particularly important for doors made of uPVC, which tend to become very squeaky as time passes. You can use a spray oil lubricant, such as WD40 or petroleum jelly to lubricate the keyways and internal mechanisms. After applying the lubricant on your key, clean it off to prevent spreading any dirt that may have been accumulated.

Once your uPVC patio doors are cleaned and lubricated, you should then test them. Observe if the door slides effortlessly into and out of its frame. Also, ensure that the hinges and locking points are aligned properly with the frame of the door. You can see the alignment marks along the edges of the frame. It is easy to fix the alignment issues by re-aligning your doors to the frame.

It's also important to note that different types of uPVC door locks are available. You might need to replace the lock if it's damaged or broken. For example, if you have E2011 patio door locks, you'll have to replace them with E2469 or E2487 lock assemblies to ensure that they are safe. These assemblies consist of three parts, including an E2014 mortise lock, an escutcheon and a lock hasp.

Lubricate the Lock

For most patio doors the lock mechanism is located in the door, hidden from view. You can buy a replacement kit at most home improvement stores and locksmiths in the event that your key cylinder has been damaged or if you're looking to upgrade your lock to provide better security. The kits cost between $10 and $20 and include a tool for opening the lock, as well as a spare cylinder. Follow the instructions included in your kit for disassembling and cleaning the old lock, and then install the new lock. Depending on how securely the key cylinder fits into the hole in the lock it may be necessary to adjust it a bit to ensure it is operating properly.

If you are looking to grease your lock, dry graphite powder is an easy and cheap alternative to liquid lubricants that can draw dust and clog the mechanism. It can be purchased from hardware stores or model train shops as well as some office supply stores. If you choose to use it, make sure the chunk of dry graphite is free from tiny bits of wood that have stuck to it. You can also purchase an industrial graphite lubricant that is available in spray form. When the spray is applied to the lock, the solvent present in the spray evaporates and leaves a layer of dry graphite which helps to lubricate the lock without drawing dust or accumulating moisture.

You can also lubricate your lock by spraying WD-40 onto the keyway. Push your key in-and-out repeatedly to spread the grease. After a couple of minutes you can turn the key and check if it is turning smoothly. If your key remains stuck, try it again a few days after the WD-40 has dried.

The replacement of your patio door locks is a straightforward task for most homeowners, but the process could be more complicated if you have a sliding door with an invisible latch and a deadbolt lock that is built-in. If your patio door comes with an invisible latch, it's required to remove the decorative interior cover by removing the screws that hold it in place. If your patio door comes with deadbolts, it will be necessary to take off the bolt. After you have removed the deadbolt and knob assembly, you are able to install the new lock.

Replace the Lock

Patio doors are a crucial part of your home's security and it's not uncommon for them to occasionally malfunction. The debris could get caught within the lock mechanism or it may wear out over the course of time. In either scenario, a damaged patio door latch poses a serious security risk to your home. Regularly checking your patio door locks will help to keep them in good shape and will allow you to correct any issues that arise.

If you can't solve the issue it's time to replace it. Many homeowners can handle this task on their own. However, it's crucial to carefully read the directions to ensure that the new lock is compatible. It's also a good idea to take the lock you have previously used to the store to ensure that a customer service representative can help you find a replacement.

The first step in replacing the lock on a patio door is to remove the handle. This can be done by removing screws that secure the handle. Once the handle has been removed, you will be able to remove the screws that hold the lock body in place.

After removing the screws you can slide out the latch body from the door frame. Secure the lever with a graphite pen. It will fall into frame if it isn't secured. The next step is to take the door strike from the jamb. The hole in which the lock hook is when the patio door is closed will be revealed. After removing the door strike, it is possible to put the new one in.

When re-screwing a door strike, it is important to use longer screws as they'll be used to fix the strike to the frame. Make sure that the new strike is aligned with the opening of the door frame, and tighten both together.

There are a variety of locks for patio doors. The most common is the central rail lock that is operated by a key. They bolt the door into the frame at multiple points and, when the key is inserted, all points should lock. These locks provide a higher level of security than standard locking mechanisms and can often result in lower homeowner's insurance premiums.