Wisdom On Double Glazing Lock Repairs From The Age Of Five Double Glazing Lock Repairs

A good quality lock on your windows and doors can stop burglars from gaining access to your home. They don't usually like to break glass or attempt to squeeze through open windows.

However, some double glazing owners have experienced issues with their door lock or window lock after it's been installed. Fortunately, these issues are usually fixable and don't require to purchase new double glazing.

Broken or Faulty Locks

If your uPVC window or door lock is damaged or defective and requires a locksmith, they can repair it for you. They can fix hinges, striker plates and locks for your double glazing. They can also move the cylinder to fix any misalignment that could be causing your handle not to operate correctly.

The mechanism could be seized when the key fits into the lock, but it does not turn or be difficult for you to insert. The dirt or grease could be trapped in the mechanism. If this is the situation it is possible for the lock to be cleaned and lubricated. It is essential to make use of a dry lubricant like graphite or teflon instead of oil, which attracts dirt and stick to the inside of the mechanism. After lubricating the lock, you must insert the key and then try to turn it. The lubricant should make through the mechanism and the lock should be able to turn without difficulty.

A malfunctioning lock could be caused by loose screws inside the mechanism of the lock. They can loosen and fall out or even break completely preventing the lock to work properly. These screws can be tightened using the help of a screwdriver. However, be careful not to overtighten them. This could damage the internal components.

A damaged lock can be dangerous for your family and you. This is particularly true if you have small children. It's possible for them to open the door without you knowing and allow them access to your home. If you are worried about this happening, a licensed locksmith can offer fast and efficient assistance to secure your double glazing doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all types faulty and broken mechanisms on both uPVC windows and doors. We can also alter your uPVC or double glazing locking system to meet your specific requirements, which means that in many cases replacement windows and doors are not necessary.

Handles that are broken or are damaged

As part of their overall security package many double-glazed windows come with a multipoint lock. This is a great choice for those who are concerned about burglars who are opportunistic and trying to gain entry into their home. Ask your locksmith about antilift blocks. They can be installed as an addition to the existing locks and will ensure that your windows are securely shut.

Handle locks are often damaged or fail. They are the first part that criminals will employ to open your window. Fortunately, the good news is that this is one of the most straightforward parts to fix.

Modern uPVC handles as well as aluminium handles are equipped with the multi-point locking mechanism referred to as Espagnolette, which is designed to ward off forced entry. This security upgrade is offered as an option on new uPVC windows. As an optional upgrade, older uPVC or aluminium handles that are no longer in use can be upgraded to a shoot bolt locking system.

When a handle is faulty it is essential to get the handle repaired as soon as is possible. A damaged handle could prevent the window from closing properly and permit drafts to get in. It could also be a vulnerability that opportunistic thieves could take advantage of, putting your family's belongings and your personal belongings at risk.

To repair the damaged mechanism, first gain access to the window frame and then remove the broken handle. The gearbox can then be accessed to determine the kind of gearbox used to open the handle. This will permit to replace the handle that matches the profile and the internal window frame mechanisms.

After the mechanism has been replaced the handle can be put back together using the original screws. However, we recommend replacing them with more long screws to ensure an even more secure fit. The final step is to apply a layer of clear sealant to protect the handle from further corrosion. Once that's done your window will be operational again and at less than the cost of replacing the entire window.

Broken or damaged hinges

If your windows don't close properly, you could experience draughts, an affliction of your home's security barrier and a higher risk of water or damp damage. Window hinges that break or become faulty are a common issue and can be fixed easily.

If your uPVC windows don't close or open it's likely that the hinges require to be repaired or replaced. While a lot of window companies require you to purchase a new window unit to fix this simple problem We're able to repair the faulty hinges and save you money.

Window hinges are often damaged after repeated use, or they might be damaged by corrosion over time. If you've broken a window hinge, it is crucial to take the necessary precautions to avoid further damage. This includes not causing the window to open or close.

You can find the right parts for your hinge by identifying the type of hinge it is. Maco, Mila and Roto are all manufacturers of window hinges. It is recommended to speak with an expert in this regard to avoid the mistake of buying parts that aren't compatible with your existing hardware and cause further damage.

A damaged hinge can be a big issue for your uPVC windows and doors. They can be a significant source of noise, and they can also allow water to infiltrate which can damage your windows.


To resolve this issue, first check that the pin barrel on both hinge halves is aligned. If it's not, tap the head pin with a hammer to make a small bend in the barrel of the hinge. This will help keep the pin in the right position. Have a person hold the doors as you take out hinge screws and hinges. Replace the hinges and attach screws using glue. Finally put the hinges in place using clamps or weights until the glue is drying.

Once double glazing repairs near me have repaired your hinges, you are able to install the door again. You can also attach the handle. It is recommended to replace the screws using the same length of dowels as the original screw so that they are in line with each one.

Broken or faulty glass

While uPVC windows do a great job of keeping the cold out and heat in, they can become damaged over time. This can be the case with broken or damaged glass as well as defective locks. If not taken care of, it can turn into a major expense. This can also detract from your home's aesthetics and lead to a loss in insulation. It is important to fix any damage as soon as it occurs.

You can fix your cracked glass yourself if you have the right tools and techniques. Make sure the area surrounding the broken glass is clear of debris so that any fragments don't cause injury or cause a trip hazard. After that, take away all broken glass pieces and dispose of them in a appropriate manner. Then, place masking tape to the entire area to prevent pieces of glass from scattering and sticking to your skin when you move them. Making sure the glass pane is fitted prior to adhering it to the wall is recommended when you have windows with two panes. This will ensure that you have enough space to finish your project.

Before applying the glue, clean the surface of the damaged frame and the glass with a dry, clean cloth. Follow the application and curing instructions that may differ from one product to the next. You may need to clamp the cracked glass using clamps that are lightweight and designed to support fragile materials, based on the angle.

After the adhesive has completely cure, carefully insert the glass into the window frame. Make sure that it is flush with the frame edge and that there aren't any gaps between the glass sash and the frame. Avoid flexing the glass as you put it back in place, as this could weaken the seal. This can lead to condensation or water infiltration.

Contact a professional glazier like O'Brien(r) to arrange an exchange if your glass window has been completely broken. It's crucial to act fast if you have broken glass.