A The Complete Guide To Replacing Upvc Window Handles From Start To Finish Replacing uPVC Window Handles

It is simple to change the handles on windows made of upvc. The most important thing is to ensure that the replacement handle fits the spindle that was cut out of the window mechanism.

If you follow the steps below, any cockspur handle will fit in most windows. The most important factor is the step in the height of the handle.

What to Do You Look For?

Many of the windows in the UK are fitted with uPVC handles, and over time they may begin to show signs of wear and wear and tear. When this occurs, the window handle may become loose or difficult to operate, which makes it essential to replace it. This is a fairly easy task that can be accomplished by anyone who is comfortable using basic hand tools.

The first step is to make sure the handle is firmly connected to the window frame and in the open position. Next, locate the pins or screws that hold the handle in place. They are usually on the inside of the handle. They can be removed using a screwdriver or pliers.

Once the handle is loose, it can be removed from its hinges by gently pulling off. The next step is to find a new handle that is the same design and size. This can be accomplished in a DIY store or online. The procedure should take just five minutes and a screwdriver.

The most important thing to consider when replacing a uPVC window handle is its step height. This is the distance between the handle's base and where it is located in the frame of the window. This is usually an accepted measurement, however it is crucial to determine the step height of your current handle before ordering an entirely new one.

Depending on the type of handle you are using there are various sizes to choose from. Inline handles for uPVC windows generally feature lug centers of 31mm There are also handles with cockspur with 43mm centres. Tilt-and turn handles are typically found on uPVC windows. They feature a unique design which allows the window be tilted for ventilation and then rotated to fully open the window.

The most common uPVC handle breakage is internal cracking, rather than a fracture from the base. This can make it difficult to open. It is essential to make sure that any replacement handle is fitted with the same spindle that was used in your original one.

Remove the handle that was previously used

If the handles on your windows are damaged or incorrectly fitted, they can cause double-glazed windows to close and open incorrectly. They may even get stuck. There are many reasons including general wear and tear, or corrosion of the handle. In these instances it is essential to replace the upvc window handle as quickly as you can in order to avoid further damage or loss of functionality.

One of the first steps that you should do when replacing upvc window handles is to remove the old handle from the window. To do this, begin by removing the screw that is covered when the handle is in the closed position. Once you have removed that screw, you can remove the handle. upvc replacement door handles is a good idea to use an electric screwdriver for this, as it makes the job easier and faster.


It is also important to note that the screws on the handle could be hidden behind plastic caps, so it is a good idea to take an Stanley knife to the screw covers and remove them. After removing the old handle, you'll have to examine the square cutout on the base to make sure that the new handle for the window lock is compatible. It is important to measure the length of the spindle on the handle you used to replace it with and then compare it with the dimensions of the window mechanism spindle cutout.

The various types of window handles made from upvc include: Espag handles, which have a central screw and can turn left or right; Cranked handles, with two screws, and are typically found on tilt and turn upvc windows and Spade handles with an arm with a flat surface and can be put on either side of the window. It is simple to replace the handle when you have found one that is suitable. Just screw it into the frame, and ensure that the spindle is inserted correctly in the lock mechanism. Once you have done this then tighten the handle to the window frame. The new upvc handles should now be secure.

Take a look at the Spindle

If you're replacing a upvc window handle that has slipped off, it is likely because the spindle that holds it in place has become loose or damaged. In some instances, it can be fixed using screws or pins to secure it. In some instances, it may be necessary to replace the handle. There are a variety of handles made of upvc. There are three kinds of handles: inline espagnolette, tilt-and-turn, and cockspur. Each handle type is installed and replaced in a different manner.

It is important to measure the handle prior to purchasing an alternative. This will ensure that the new handle is of the correct size and will fit correctly within the window. Fortunately, all handles follow industry standards for sizing, so it's quite easy to locate the correct size.

To determine the size of your handle first remove it from the window by turning it to the open position. You should be able see the dimensions of the pin or screw that secures the handle. Then, use a ruler or tape measure to determine the length of the spindle. Once you have determined the length of the spindle you can purchase a new spindle that is the same length.

When you are looking to replace a handle window handle, it is crucial to take into consideration the step height of an upvc window handle. The step height is measured from the base to the point at which the handle is positioned on the frame. This usually is approximately 21mm or 9mm in aluminum and uPVC. Dropping something in the space will allow you to see how far the handle extends before it reaches an obstruction.

Cockspur handles often have different backset heights, based on the type of window they are installed in. Inline espag handle heights are 43mm from centre to centre (two fixing points). Cockspur handles, however, have different backset heights depending on the style of the window they are in. This is because they have a spur which extends from the handle and is locked onto a cockspur wedge-striking plate.

Fit the New Handle

If you've decided to replace the handle, make sure you align it with the screw holes in the door and secure it using the screws supplied. If you're also replacing the latch lever it can be put in in a similar way to the main door handle. After that, attach the door trim once more to hide the screws for mounting.

Tip: To remove the head made of metal from the wooden wedge Hold the handle so that its wider end is resting on the floor. Then use a hammer to tap on the thin end of the handle. Be careful not to scratch the handle or the spindle.