It's The Complete Guide To Replacing Upvc Window Handles Replacing Upvc Window Handles

If you follow the proper steps, replacing upvc window handles will be a simple job. Knowing the type of handle you have is crucial as is measuring the spindle to ensure that you purchase the correct replacement.

The first step is to open the window to gain access. Then, remove any screws that are above or below the handle with a flat-headed screwdriver or a butter knife.

Identifying the Handle

If your double glazed window handle is broken or has become difficult to operate, it's probably the time to replace it. The good news is that replacing a upvc window handle is a DIY project that can be accomplished quickly and inexpensively. The trick is to identify your handle's style and measurement of the spindle length to ensure that your new handle will fit correctly. Here's how to do it:

The majority of uPVC window frames utilize either cockspurs or espag handles. Both handle types have an mechanism that slots into a square metal bar located within the frame of the window. The size of the rod determines whether the handle can be locked or not. To test the operation of the handle, try turning it loose or locking it and then see whether you are able to open or close the window.

To replace a uPVC handle, you will need to lift the doors to reach the screws that attach it to the frame. They are usually hidden under plastic screw covers that can be easily removed using an screwdriver with a flat head. Once the screws are removed the handle will fall off easily.

Before you begin putting in your new handle, be sure that it's the exact length as the old one. You don't need a handle too short or long because it could cause issues in the operation of your windows and lead to premature breakage. To avoid this, measure the length of the spindle from the base of the handle up to the tip and make sure that the new handle is the same length. You can also purchase a handle that has spindles that are longer or shorter than the one required by the window.

Identifying the Spindle

It is important to determine the kind of handle you have on your windows made of Upvc prior to you replace them. wooden window handles Repair My Windows And Doors will allow you to find the right replacement and ensure it fits correctly. It is easy to determine the type of handle by looking at the handles. It is also important to know if the window has an locking mechanism or not. This could affect the ease of opening and closing the window.

If the handle is not secure or doesn't turn the way it should, then it's time for you to replace it. This is particularly relevant if the window does not open and close easily or when it's difficult to open. It is crucial to replace the handle before it breaks completely, as this could be dangerous for children as well as pets.

Find the spindle on the old handle before buying new upvc handles. The spindle length is located on the back of the handle. It is essential to measure it correctly in order that the handle will fit correctly. Ideally, the spindle should have seven millimeters of cross-section.

Once you've worked out the length of the spindle, you can take the new handle and place it into the same position that the old one was. Put the spindle into the same hole as the old one. Install the new handle in place and then replace any screw caps if needed. Before wrapping up your tools, test the new window handle to ensure that it operates smoothly and shuts the window correctly. Use a silicone-based lubricant to ensure that the handle and all moving parts move smoothly.

Unscrewing the Old Handle

There are indications that your window handle needs to be replaced, whether it is broken loose, sagging, or functioning correctly. For instance, if it's difficult to open and close the windows, this is a clear indication that the handle is not working correctly. Also, if your lock isn't turning to lock the window then this is another clear sign that it's time to replace the handle.

It is crucial to be patient and careful when changing the handle of your window. The window handles are heavy and could fall on you if not careful. To remove the old handle you'll need to take off the screws on the top and bottom. Once you've removed them, you can remove the handle and then remove it from the window.

You can pick from different sizes, styles and finishes when it comes to choosing the right handle. It is important to identify your handle type and determine the spindle's length because this will determine the degree of compatibility the new handle will be.

Having the correct size and style of handle will ensure it is simple to use and secures the window in a secure way. This is because the handle is fitted with a particular slot that it can fit into the gearbox in the window. If you use a handle of the wrong size, the window may become stuck or even break. Switching the handle on Everest uPVC Windows is simple and takes just five minutes. It's a great option to give your window a visual upgrade and enhance its function in the same time.

Installing the New Handle

It is essential to select the correct size handle when replacing window hardware. If the handle is not the correct size, it will not fit comfortably into the frame. This could cause excessive stress and premature breaking. This is especially true when a window is opened and closed repeatedly and forcefully, since the handle that is not properly fitted can easily suffer from a lack of structural integrity.

The first step is to get rid of the screws that cover the cap caps that are situated between the handle and above it using a thin, narrow tool (for example a butter knife). You will then see two screws that you will have to take off. After the screws have been removed, you can start taking the handle off of the window mechanism. Make sure you hold of the handle to ensure it doesn't fall and harm you.

Before buying replacement upvc window handles, it is essential to measure the spindle length of the handle that was previously used. This can be accomplished by measuring the length of the spindle on the handle you used to have. This information will be required when choosing the right handle, as different types of uPVC handles come with different spindle lengths.

Espag handles, typically found on uPVC windows, feature an elongated 7mm spindle which activates the internal gearbox which operates the multipoint locking mechanism for greater security. Cadenza handles come with blades that slot into the lock mechanism and may differ in their fixing centres between 58mm and 62mm depending on the design. Cockspur handles have an extended nose that locks over the shootbolt rods and can also differ in their fixing centers between 43mm and 58mm.

Test the Handle


It is essential that the new window handle functions correctly when it's replaced. It is essential to ensure that the new handle works correctly. This includes turning the handle to activate the mechanism and checking that the window closes and locks properly. Anyone can change upvc window handles. All you need is the proper tools and patience.

The first step is opening the window so that you get access to the screws that keep the handle in place. These are usually hidden beneath caps or plastic screws that can be easily removed using the screwdriver. Once the screws have been removed, the handle will easily be removed from the window frame.

Next, you'll need to determine the type of handle that is installed on your window, and measure the length of its spindle. This will enable you to buy an handle that is the same size as the existing one. Espagnolette handles are usually fitted with a spindle which passes through the handle to control the locking mechanism inside the window. They can be right or left-handed, so it's important to correctly match the hands of the handle and lock when it's being replaced.

Cockspur handles are usually fixed in the same way as espagnolette handles but have different spindle lengths and can be left- or right-handed. After you've measured the spindle and identified the handle, it's straightforward to replace the handle with a Cockspur.

Once you've screwed the new handle into the place, it's a good idea to test it by turning it to turn on the lock. You can then replace the screw cap, and make sure everything is working before covering it.