10 Best Facebook Pages Of All Time About Repairs To Upvc Windows Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and even be fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good shape.

For single pane windows it can be relatively simple to replace windows, and the new one will generally fit within the frame of the previous one easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the old panes. In this situation it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you plan attempt to remove the window panes yourself it is crucial to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a drop cloth prior to when you begin working on the glass so that any fragments of glass fall on the fabric instead of landing on the floor, where they could be trampled on and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional can come out and repair the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the distance between the door and the window is substantial, you may want to use security screens that has an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could be affected by a variety of issues such as sliding. A window that is sagging can cause problems with light, draughts, and even security. It's important to take action immediately if you notice your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sliding. To do this, you'll need to open the window to get to the frame. Then, using a screwdriver, you can take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and test it for fit. If you're satisfied with the size of the window, you can tighten screws to secure them in the right position.

If you can't reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and draught-proof.

uPVC handles can also become loose. The majority of the time, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. It's fairly simple to repair a loose uPVC handle. You'll first need to close the window and then perform an experiment fitting. The corner joints of the sash should be aligned with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

It is important to take action if you awake each day to find a smoky wall and wet floors. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the problem is, the old caulking might need to be removed. When it comes to uPVC repair, you must avoid over-caulking. This can make your window more difficult to clean and lower its energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In window repair near me , you might have to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed window, it is more likely the issue is with the seal than the frame. It is also possible to be corrected by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with ease it could be hinges that are at the fault. Any competent DIYer can replace these in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. It is very easy to change the hinges on a window but it's much easier if someone else helps you to hold the frame.

Check that the uPVC hinges are open and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either due to opening the window in the wrong way or by a poor installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to offer advice.

It is also crucial to grease the hinges regularly. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also reduce the risk of a window sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. The hinges can also become disaligned as a result of wear, causing an opening between the frame and sash. If they are beyond repair, it could be required to realign them. In addition, the interlock could also become disaligned. This happens on the hinge side and may need to be cleaned. In some cases it might be necessary to replace the hinges.

These seals can wear down or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will lessen the risk of draughts.

One of the most effective methods to reduce drafts is to use an draught excluder. These are typically made of fabric which are filled with a kind of filler. They can be put on the windowsill on top. They will help block out cold air and keep your home warm and cosy!


The windows made of upvc can keep providing excellent insulation and security in your home by performing regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and they may reach an point at which it is more efficient to replace them than repair them. If you encounter any issues with your window made of upvc, it's best to consult an expert as soon as you can.