10 Best Facebook Pages Of All Time Concerning Replacing A Window Handle Tips For Replacing a Window Handle

It is easy to change your window handle in the comfort of your home. Follow these tips for smooth operation and a stunning appearance.

Remove the screw covers from your uPVC handle to expose the screws. Then, measure the length of the spindle to ensure that you receive the correct size replacement.

1. Measure the Spindle length

It is crucial to get the spindle size right when replacing a window handle. It could affect the tightness or elasticity of the handle as well as whether the handle will lock properly into the window frame. The spindle is a steel shaft that connects the handle to the lock inside the frame of the window. The spindle is available in either the standard cross-section of 8mm for industry or the older versions that measure 9mm. Modern industry standards are 8mm, but it wasn't always that way. It is important to confirm the measurements before buying a new handle.

The most efficient method to determine the spindle length is to take off the handle you have already installed This can be accomplished by turning it to the open position and then removing the two screws (which might be hidden behind plastic caps that will need to be removed) which hold the handle. After removal, measure from the base of the handle until the end of the spindle. This will provide you with the measurements needed to purchase a replacement.

There are many options when it comes time to choose a new window handle. From sleek chrome that will fit into a modern home to traditional bronze with a burnished finish that looks stunning in restored Georgian rooms, or even the more quaint Tudor Cottages with curled mongoose tail latches. The possibilities are endless, but the most important thing is to choose a style that suits your home.

Espag handles are typically installed to uPVC windows and are identical in size with 43mm centers (2 fixings). Cockspur handles are available in a range of sizes, starting at 58mm up to 62mm. Window handles made of Cadenza are different in size since they have an angled blade that functions with a multi-point locking mechanism within the window.

When choosing a window handle take into consideration the hand you use to open your door. Inline Espag handles can be used with right or left-handed windows. Cranked window handles are only used for windows that open in a single direction.

2. Remove the Handle

Whether the handle is damaged or worn out, a window handle that is shattered can be very frustrating. The good news is that you can replace a uPVC handle yourself. All you need are the most basic tools and a bit of time to complete the job.

First of all, you must open the window and make sure that it's in an unlocked position. The next step is to remove the screws that hold the handle in position. After the screw caps are removed then you'll be able to remove the handle.

The handle is attached to a spindle within the window frame. It is fixed by screws or pins dependent on the kind of handle. The most popular types of handles are inline Espagnolette handles and the cockspur handles. Both types of handles are available on casement windows, as well as aluminium ones. The handles can be locked by using a key to block access by unauthorised persons from the outside. Or Repair My Windows And Doors can lock the handles by turning them clockwise.

To take the handle off, you will require a flat-bladed screwdriver. Once this is released, the handle will fall off the spindle. After the handle is removed, you'll need to measure the spindle length and ensure that the new handle is a good fit.

Once you have determined the correct size for the handle, screw it into place. It is essential to make sure that the handle is properly attached and that it is rotating in the correct direction (clockwise in the case of an open and counterclockwise if handle closes). It is also crucial to check that it is not fitted upside down.

Replace the screw caps. After you've done this you can test the handle to confirm that it is working correctly. You can also test the locking system by moving the handle from an unlocked position to the locked position and back.

3. Take the Screws off

A uPVC window handle is an integral element of any home and is usually the first thing to exhibit signs of wear and wear and tear or damage. It can be caused by natural causes or from regular use and sometimes even malicious damage caused by opportunistic criminals who might seek to open a closed window and gain access to your property. But, a simple fix will solve the issue and stop the problem from happening again.

UPVC handles can be difficult to open if the locking mechanism isn't functioning correctly. It's usually possible to resolve the problem by replacing the multipoint locking mechanism rather than the entire handle. This could save you money.

After you've removed the old handle, you'll have to take off the screws that were holding it in place. They're usually on the inside of the base. You may require a screwdriver to accomplish this and it's important that you don't over tighten as this can cause the handle to loosen.

The next step is to locate the fixing screws or pins that hold the new handle in place. They are typically located on the inside of the base of the handle. You'll require a screwdriver to take them off. If you'd like to replace them, you should replace the caps on the screw and check the handle to ensure it functions properly.

When you're ready to install the new handle, simply line up the spindle with the cut-out in the window mechanism and screw it into the right position. If you're looking to replace the screw covers, make sure the handle is in an open position and that the screws are securely secured. Once you've completed this, you're all done and you can enjoy your new window handle. I hope this will enable you to avoid having to pay for costly window and door replacements in the future. Contact us if you require more information on this or any aspect of your uPVC window.

4. Fit the New Handle

If you're replacing a damaged handle or simply making it more modern, the process is surprisingly easy and can be accomplished in a matter of a few steps. The most important thing is to identify the type of handle, take measurements of its spindle, and determine what tools you'll need to complete the job. Safety is always the top priority when working with windows and tools. It is also essential to take your time and follow the steps with care to ensure you have a functioning handle that is safe to use.

To begin, locate the screws that hold your window handle in place. Remove them while holding the handle firmly to stop it from falling and causing injury. Once the screws have been removed they can be repositioned in a secure location to be replaced in the future.

After the handle that was used previously has been removed, you can begin fitting your new handle. It is essential that the handle fits perfectly so that it functions correctly and locks the window in place. The next step is to slide the square metal bar on the back of the handle into the hole in the window mechanism, making sure it is securely in place.

Once your new handle is installed, the final step is to replace the caps on the screws and verify that it functions. If you aren't satisfied with the result or if the window does not open and close as it should then the next step is to contact our experts who will be able to help.


The majority of homes in the UK have uPVC windows. As so, a large number of them will need to be replaced in the near future due to wear or breakage. Anyone with a little DIY experience can easily accomplish the task. The most important aspect in the success of this procedure is ensuring that you're using a handle which matches your existing window in terms of size and design. If you're unsure about what kind of handle you'll require, don't hesitate to reach out to our team, who will be able to guide you through the choices available.