Don't Forget Upvc Door Handle Replacement: 10 Reasons Why You Don't Need It Choosing the Right UPVC Door Handle Replacement

It's simple to replace your handles made of upvc however choosing the best handle can be a bit difficult. The majority of modern double-glazed handles come with spring cassettes in them but older ones don't.

If the handle made of upvc on your multipoint lock is loose and floppy, there may be an internal issue. This article will address several possible problems & their causes.

Handles that are drooping or sagging

uPVC handles can sustain wear and tear, especially in older properties. A broken spring cassette inside the door lever is the most common cause of a floppy handle. This is typically caused by excessive force and the square spindle that holds the cassette may be displaced or round off.

It is important to be aware that a uPVC handle replacement can be completed within a matter of minutes. The first step is to take off the old handle unit. To remove it, loosen the fixing screws on the back of the handle lever. Once the handles have been removed you can remove the cassette from the square spindle, and replace it with the new one.

On the internet, you can pick from a range of uPVC handles that come with different finishes. The finish you choose will determine the durability of your handle as well as how easy it will be to clean. Finishes like Resista, Stainless Steel, or PVD are designed to resist corrosion and last up to 25 years.

Once you've selected the color or style, you can choose the type of handle you require. The most popular are pad and lever arrangements. Lever pads are equipped with a lever on the inside and an outside paddle, this is often employed as a security measure to block access by unauthorised persons.

Repair My Windows And Doors is to determine the dimensions of your current handle and write them down. You'll need to know the PZ dimension (the distance from the screw hole to the center of the lever) and the length of the handle and the dimension of the keyhole. You can compare the measurements with the size matrix of the handle to find the appropriate replacement.

Broken springs

Over time, the handles of uPVC doors are prone to becoming wobbly or loose and at times the spring cassette inside may break. These springs are used to ensure that the lever is in a horizontal position. Without them, your doors will not lock properly.

Modern uPVC handles are designed with these cassettes integrated directly into the backplate. The springs are usually installed into older uPVC doors mechanisms. This isn't something that can be fixed by yourself, but it's worth asking your locksmith to take a look as this could be the cause of the sagging or drooping uPVC door handles.

One of the most frequent issues associated with uPVC door handles is that they get unstable or wobbly after a certain period of time, and this is typically due to worn-out springs which can be a relatively simple fix. This is usually caused by excessive handling of the handle. The square spindle inside the handle will wear out and cause the springs to move.

To correct this issue, open the door and loosen the fixing screws located at the back of the handle plate. This can be done using a Philips screwdriver. After the screws have been removed, the handle can then be removed. The handle plates can then be carefully removed. The old springs can be removed and replaced with new ones.


This is important to note when buying a replacement handle. This measurement is known as the PZ and it is essential to use a calibrated measuring tape to ensure an accurate reading.

After replacing the springs, you should be able to use the handle with no issues. But, it's important to grease the internal mechanism to ensure that everything works as it should do. This will ensure that your uPVC door is as safe as it is, and make them more comfortable as time passes.

Handles that slide around

Handles that move around can be caused by a variety different reasons. One of the most common causes is when the levers on the handle aren't aligned properly with the lock. This can happen on both uPVC and composite doors, however it is generally more noticeable on older doors as they are typically made of less durable materials that don't hold up to the elements.

A professional can solve this issue by re-aligning the handles so that they are in line with the lock. They will also check the lock to see whether anything is required to be fixed. In most cases, a small adjustment to the handle springs is enough to solve this problem.

The replacement of your uPVC door handle is simple enough, but it's crucial to measure the handles that are in use to ensure that you have the right size replacement. You'll need to determine the distance between the two fixing screws and the dimensions of the lever as well as the key-hole position. Then, you can use this uPVC handle size guide to locate the right replacement for your home.

After you have made the measurements, you can remove the existing uPVC handle. It is usually quite easy and requires a screwdriver to get to the screws on the inside of the door. Once the screws have been removed, you can then take off the handle itself and then install the new handle.

It's important to secure the door using an appropriate wedge prior to beginning. This will stop it from closing during the course of your work. After you have removed the handle, you'll be able to access the parts beneath the door that are causing the door to move.

A handyman from Fantastic Services will be able to help if you don't want to do the work yourself or don't have the skills. They will use specialist locksmith opening techniques to unlock the door without causing damage and will then replace the faulty handle and make sure that everything is in place and functioning exactly as it should.

Damaged gearbox

A damaged gearbox could cause the door handle made of upvc to become stiff or lose function. This could prevent the lock from being able be opened with keys. This is a risk and must be addressed as quickly as is feasible. If you're unable to resolve the issue yourself it is essential to call a locksmith since they have the expertise and tools needed to complete the task correctly.

The first step is to remove the handle from the cover plate. This can be done using an instrument that has a flat-headed tip. After you have removed your handle, you will be able to take out the middle screw that holds the cylinder in position. After you have removed the middle screw, you will then loosen the two screws that hold the barrel. You can then pull the barrel from the door. To accomplish this, you'll require someone to prop the door wide.

After you have removed the cylinder, you can replace with a brand new cylinder. It is crucial to make sure that the new cylinder is the exact size as the old one. In the event that it isn't, you could end having a handle that isn't aligned correctly. This can cause a variety of problems, such as leaks and drafts.

Many upvc door handles have slots for adjustment. These slots can be used to tighten or loosen the handle. The slots are typically located on the inside of doors, close to the point where the handle meets with the cylinder. Allen wrenches can be used to tighten the slots for adjustment. After you've made all the necessary adjustments then you can screw the handle in and put it back in place. After that, you can test the handle to make sure that it's functioning correctly.

If the door handle of upvc becomes floppy or loose when it is closed, it is typically a sign that the upvc gearbox has failed or the internal spring components are in the process of breaking down. This can cause the upvc multipoint lock to fail, leaving your door open to burglars. In this scenario, the upvc gearbox will require replacement. It will cost between PS145 between PS145 and PS280, including labour.