15 Up-And-Coming Automotive Key Repair Bloggers You Need To Keep An Eye On Automotive Key Repair - What to Do When Your Car Key Won't Turn in the Ignition

We've all been there the car keys won't turn on the ignition. It could happen at the worst possible moment, like when you're filling your trunk with groceries or driving home from work.

Instead of panicking instead, there are a variety of solutions to get back on the road. Here are some common automotive key repair problems and possible solutions:

Broken or bent key

The most common reason an owner of a car cannot begin their vehicle is a bent key. Straightening the key is an easy fix. This might seem easy however, you need to be careful. The key is very thin and may break if bent even a little.

You will need a stable work surface as well as a pair of pliers for this. Take the key at one end with the pliers, then bend it until it is straight. It is recommended to do this on the floor or in a vice. You can then place it into the lock to see if it changes.

If not, it might be time to have a new key cut. This will avoid having to call a locksmith, and will ensure your key works.

Keep an extra key in your purse so you don't have access to your vehicle in the event that your key breaks.

If you're having issues with a broken or bent key, try applying some grease on it prior to inserting it into the lock. This will allow it to move through the cylinder, and also prevent it from becoming stuck. You can use graphite or spray lubricant. If you're using a spray ensure you attach the plastic tubing included with it for an easier application. This will also help prevent moisture from ruining your key.

Pins that are snuck or springs

Sometimes a pin (also known as a roll pin) or spring may get stuck. A pin is a small piece of metal that is between 5.1 and 7.6 cm (2.5-3.0 in) long, with hollow ends. It is used to connect two components of machines. In most cases, you can remove pins by simply pulling it out with your fingers or using a wrench.

If you own an older car that uses microchip keys it is possible that the key needs to be programmed to work with your car. mouse click for source can be easy or difficult depending on the car's manufacturer and model.


Call us if you need assistance with your automotive locks or keys! We can repair, replace or program nearly any key for your vehicle.

Gear selector

It's crucial to take your vehicle to a mechanic as soon as you can if the gear selector is stuck in park. This is a safety issue and could result in serious damage to your vehicle if you continue driving. This could be a sign that the transmission is experiencing more serious problems that are expensive to repair.

Luckily, most times, this issue can be easily fixed. Most of the time, the cable end that is attached to the lever may snap or become disconnected. The mechanic can repair this in a few minutes.

In certain instances there are instances where the gear selector bushing may get damaged or worn out. The rubber covers are put around the joints of the gear system in order to keep it fluid. They work in a similar manner as cartilage in your knees so it's crucial to keep them healthy and supple.

It is not uncommon for them to wear out over time, but there are some ways to extend their life. First, you should stay clear of using the gear selector in extremely cold weather. This is because the cables that control the gear tend to freeze and cracking. You should also replace your bushings, for instance ones made by First Line, with high-quality ones.

These bushings are an important element of your gear selector, and should not be ignored. If you notice yours is damaged, you should visit an auto repair shop specializing in Land Rover repairs. They can assist you in finding the correct parts to repair the gear selection system. They can also offer a variety of other services such as maintenance and repair of your transmission.

Dead battery

If you turn the ignition key but hear nothing but a click, then your battery is dead. As batteries age, they go through an natural process that causes them to die prematurely. The negative plates of your car battery will start to be coated with sulfate crystals.

A dead battery may cause you to lose the power source in your car, causing the radio or the electric windows to stop working. If your car has been having issues getting started in cold weather, this is a good sign that it is time for a new battery.

Sometimes, your issue might not be a dead battery, but an issue with the charging system of your vehicle. A mechanic's check to verify that the serpentine belt, alternator and battery cables are all functioning properly can solve this issue.

Another common repair for a key in the automotive is a key fob that has stopped working properly. The key fob connects to the computer in your vehicle and relays signals and commands between the engine and the accessory systems. This system can be confused or cease communicating if it gets wet or is exposed to extreme temperatures.

Follow the steps in your owner's guide to reset a lost keyfob. Depending on the model of your car it may be necessary to open and close the doors, turn the lights and other electronic devices off and on, press a certain sequence of buttons, or open and shut the windows. If this doesn't work for your fob, it may require professional programming by an expert. Try these easy methods before you buy an entirely new fob.

Ignition socket

Modern car keys have an embedded transponder chip in them that sends a signal to a receiver in the ignition when they are inserted. The signal is sent to an immobilizer to determine whether the key is in the right place for the car to begin. In the 1990s, theft of vehicles became such a problem that most manufacturers fitted this transponder security system in their vehicles to ensure safety and insurance purposes.

If remote key fob repair own a newer vehicle, the only option to replace your keys could be through the dealership or by contacting the manufacturer directly. Before you go there note down the VIN number of your vehicle (vehicle identification number). This number is usually found on the dashboard's front or door jamb in your owner's manual.

Bring your current key along to a participating AutoZone store and a representative will employ an instrument to trace the contours of the key blank to accurately duplicate the original key. The new key will be cut on site using a precision cutting machine. If your key is equipped with an edge, a fob or a large head that is grey or black, it will need to be programmed for your car before you can start the motor.