12 Facts About Double Glazing Lock Repairs That Will Make You Think Twice About The Water Cooler Double Glazing Lock Repairs

Quality locks on your windows and doors will stop burglars from entering your home. They usually don't want to break glass or try to squeeze through open windows.

Certain double glazing owners however, have had issues with their door or window lock following the installation. Luckily, these problems are usually fixable and don't require to pay for new double glazing.

Broken or Faulty Locks

If your uPVC door or window lock is broken or faulty or has a problem, a locksmith will fix it. They can repair the striker plates, hinges, and locks on your double-glazed. They can also move the cylinder to fix any misalignment which could be causing your handle not to work properly.

If the key fits in the lock, but it doesn't turn or is difficult to insert, then the mechanism may be seized up. This could be due to dirt or grime getting stuck within the mechanism. If this is the case, then it might be possible to clean the lock and then lubricate it. Make use of a dry lubricant, such as graphite or teflon, not oil, because oil attracts dirt and cause it to stick to the inside mechanism. After you have lubricated the lock, you must insert the key and attempt to turn it. The lubricant should make through the mechanism and the lock should be able turn easily.


A damaged lock can be caused by loose screws in the lock mechanism. They can loosen, fall out, or even break completely preventing the lock to perform as it should. The screws can be tightened by using a screwdriver, but you must be careful not to overtighten them. This could damage the internal components.

A faulty lock can be dangerous for both you and your family members, particularly if you have young children. It's possible for them to unlock the door without you knowing and allow them access to your home. If you're worried that this could occur, a licensed professional locksmith can assist you secure the double-glazed doors.

Misty Glaze are a professional uPVC and double glazing company based in Lancing and can repair all types of faulty and damaged mechanisms handles, handles, cylinders, and lock systems on both uPVC windows and doors. We can also modify your uPVC or double glazing locking system to meet your specific needs, which means that in most cases, replacement doors and windows are not necessary.

Broken or Faulty Handles

As part of their overall security plan, most double-glazed windows feature a multipoint lock. This is a great choice for those who are concerned about potential burglars trying to gain access to their home. Ask your locksmith about antilift blocks. They can be put in alongside your existing locks and can ensure that your windows are securely shut.

It's not uncommon for handle locks to get damaged or fail - they are the first component of your window that will be pushed open by criminals intent on breaking into. Luckily, the good news is that this is one of the most straightforward parts to fix.

Modern uPVC handles as well as aluminium handles are equipped with a multi-point locking mechanism, referred to as Espagnolette that is designed to resist forced entry. This security upgrade is usually available as an extra on new uPVC window installation. Older uPVC and aluminium handles can be upgraded to lock systems that shoot bolts and again as an additional extra on new double glazed windows.

It is crucial to fix handles as quickly as possible after it has been damaged. A damaged handle could prevent the window from closing properly and permit a draft to enter. It may be a weakness that opportunistic burglars could exploit, placing your home and belongings at risk of being taken.

The process of repairing the damaged mechanism begins with opening the window frame and removing the damaged handle. The gearbox that opens the handle is then removed and the type of gear is identified so a replacement can be sourced which is in line with the profile of the internal window frame mechanisms.

Once the mechanism is replaced the handle can then be fixed using the original screws - however, we usually recommend replacing them with longer ones as this will give the most secure fit. The final step is to seal the handle with a clear sealant. This will shield it from further deterioration. After that the window will be fully operational again, and at less than the cost of replacing the entire window.

Hinges that are Broken or Faulty

If your windows don't close properly, you may experience draughts, the weakening of your home's security barrier and an increased chance of damp or water damage. Broken or damaged window hinges are a common issue and can be repaired easily.

If your uPVC windows don't open or close and close, it's likely hinges need to be repaired or replaced. While most window manufacturers require you to purchase a new window to resolve this simple issue We're able to repair the damaged hinges and save you money.

Window hinges can often break after repeated use, or they might be damaged through rust over time. If you've got a broken window hinge, it is crucial to take the necessary precautions to prevent further damage. This includes not causing the window to close or open.

The type of hinge you are looking for will help you find the right parts to repair it. Maco, Mila and Roto are all window hinges. Get advice from a professional before purchasing parts that won't work with your existing hardware. This can cause more damage.

The hinges that are not working properly can be a huge problem for uPVC doors and windows. They can be an important source of noise and can also permit water to get into your windows.

Verify whether the pin barrels on both sides of the hinge are aligned. If not then tap the head pin using the hammer to create an arc in the hinge barrel. This will help to keep the pin in the right position. Ask a second person to hold the door as you take the hinges and hinges from both the doorjamb and the door. Replace the hinges with those of a matching size and then attach the screws using glue. Finally, secure the hinges with clamps or weights until the glue sets.

After double glazing repairs have repaired your hinges, you can reinstall the door. You can also reattach the handle. It is a good idea to replace the screws using the same length of wood dowels as the original screw so that they are in line with each other.

Glass that is broken or Faulty

While uPVC windows do a great job of keeping the cold out and the heat in, they can become damaged over time. This can be the case with broken or damaged glass as well as defective locks. If left unattended, this can become a very costly issue. It can also hurt your home's aesthetics and lead to a loss in insulation. It is essential to repair any damage promptly.

If your glass has cracked, but not broken, you can usually fix it yourself with the proper tools and techniques. First, make sure that the area around the glass is free of debris so that any shards won't cause injury to anyone or are an accident-prone area. Then, remove any broken glass pieces and dispose of them in a proper manner. Then, place masking tape over the entire area to stop pieces of glass from scattering and sticking to your skin when you move them. Pre-fitting the glass pane prior to adhering it to the wall is recommended when you have windows with two panes. This will ensure you have enough room to finish your project.

Use a clean, dry cloth to wipe down the glass's surface and the frame before applying the glue. Follow the directions for application and curing time which may differ from product to. You may have to clamp the broken glass with lightweight clamps designed to hold fragile materials, based on the angle.

When the adhesive has completely set, carefully place the glass in the window frame, making sure it's flush with the edge of the frame and that there aren't any gaps between the glass and the window sash. Be careful not to bend the window when it's being installed, as this could weaken the seal and lead to water infiltration and condensation.

If you have a glass door that's completely shattered or has larger cracks, contact a professional glazier such as O'Brien(r) to organise the replacement. If you leave broken glass unattended, it could cause danger to pet and children, so it's essential to act swiftly.