17 Signs That You Work With Volvo Keyfob How to Change a Dead Volvo C30 Key Fob

The Volvo C30 is a good car, but it has some minor imperfections. The two front seats are comfortable, however the rear seats aren't as comfortable and the cargo space is limited.

If your Volvo key isn't turning it's likely due to a variety of issues. Certain keys require programming. This should only be programmed by a dealer or automotive locksmith.

How do I change the key blade

You might still be able to unlock your Volvo with the mechanical blade even if your key fob is not working. In the majority of new Volvos there is an internal mechanical key that can be used to unlock the door of the driver in the event that remote keys fail to work. You can also use the mechanical key to turn on the vehicle, provided that the push-start button on your Volvo is activated by the sensor when you get into the car.

To access the blade of the key, place the fob with its "Volvo Cars" logo right-side up. Find the small black button on the bottom left of the key fob. Slide it down and to your right. The cover will come off and allow you access to the secret key blade that is inside.

The battery for the key fob is easy to change. Slide the key fob from the key ring, then lift the cover's back to reveal the battery. You should notice that the battery is an ordinary CR 2032 watch-style cell. Take the old battery out and replace it with a brand new one, taking care not to touch the batteries poles'+ and ' with your fingers. These batteries are available in most pharmacies and grocery stores.

How to Replace the Battery


The key fob has a small battery that will likely need to be changed at some point in the ownership of your car. The fob also has a mechanical key blade that will allow you to unlock the door to the driver when the remote battery is dead or the keys are lost.

The battery can be changed quickly, but be careful not to damage the contacts of the electric wires within the back cover of the fob. To remove the corner using a small flathead screwdriver tool or a plastic automotive prybar tool. After removing the cover you can replace the battery by putting in a new silver button-cell (CR 2430 3-volt) with the "+" positive side facing downwards and the "" negative side toward you.

The key blade can be inserted into the fob after the battery has been replaced. The alarm will be disengaged by pressing the unlock button only once. Repeating the button will unlock all doors and open the tailgate if you have one installed on your car.

Most pharmacies and grocery stores offer batteries to replace. They are typically sold as watch batteries and usually include a number printed on the battery to help identify it.

How to change the ignition cylinder

Ignition cylinders play a crucial role in allowing your Volvo to work properly. They supply power to the different elements of the car and allow it to start. In time, they can become worn out and should be replaced. If your Volvo has trouble getting started, or stops while driving, you may have to replace the ignition cylinder.

If you're lucky, it might be something you did wrong, or simply made a mistake. Maybe you didn't take the key out completely or it got stuck in the lock's cylinder. You can try to get rid of the key by moving it around and shaking it gently. But, be volvo replacement key cost not to applying too much force because it can break something in the steering wheel or ignition switch.

Another possibility is that the ignition switch has failed. This switch is used dozens of times a day, so it's not a surprise that it may wear out. In most cases, it will begin to fail in one of the settings that power devices or the ignition system, and then it might stall. The ignition switch can stop working if it is near to fail. It is essential to get it checked as soon as possible.

The technician will look at the entire system to determine the cause of the issue. They'll look at the ignition cylinder, the key, and various components in the security system. They will also check the wiring in an older model car to determine if there are any issues.

How to change the remote

If you find that your Volvo key fob battery fails or you want to change it out, there is an easy and quick way to do this. You can use a flat screwdriver to pry open the back cover of your key fob and replace the battery. You can slide the battery cover open by pressing the small grey button in the upper right corner of your key fob. Then, you can remove the old battery and replace it with an entirely new one. This is likely to take 30 minutes or less.

If you have a modern Volvo model that features remote window roll down, you can control this feature with your Volvo key fob. You can also shut the sunroof or windows using the lock button (if it is equipped). When you hit the unlock button on the Volvo key fob of the SUV, the alarm will stop and the driver's side door will be unlocked. If you press the button twice, it will unlock other doors and even the tailgate.

It's time to replace the battery of your remote key in the event that you see "REMOTE Key Battery Low Voltage" in your car instrument cluster, or if your locks do not respond when you are within the range. Replacing the battery of your remote key is a simple and quick process that can be done in just a few minutes at home or with a local car dealer.