8 Tips To Boost Your Windows Repair Game How to Get Your Windows Repair Done Right the First Time

A storm that is severe or a stone dropped by the lawnmowers or a mishap at home can cause cracks in your windows. You may be able to get by with some temporary fixes until Mr. Handyman from Anne Arundel and North PG professional arrives to repair the damage.

A clear masking or packing tape can keep superficial cracks, like spider cracks, from worsening. Be sure to tape both sides of the crack.

Frames that are Rotted

The rot on windows' wood isn't just ugly and a risk to your safety It also lowers the insulation value of your home. Frames that are damaged by rot can allow cold air to enter your home, and warm air out, causing you to lose money. This is because the rotting wood allows moisture to enter and weaken the interior frame, decreasing its capacity to hold cool or warm air inside your home.

A weak frame for your window can also make your home vulnerable to burglars who will be able to easily break the window and gain access to your home's interior. This kind of damage can be avoided by fixing and re-building your wooden windows. Your home will look more attractive and safe.

If your window sills and frames are rotten, it's essential to fix them as soon as possible before the issue gets worse. The first indication of rot is usually visible cracks or discolorations in the paint. The more advanced signs of rotting will include a soft feel to the wood, or the appearance of mold on the inside of your window frames.

It is essential to call a professional as soon as you notice any of the above problems. Wood rot can spread quickly, so the sooner it is dealt with, the cheaper and easier it will cost to fix. If you do not address it until the entire wood is rotting away, it is impossible to fix.

Fortunately, windows with rotting frames and sills can be fixed in 99% of cases where the rot is detected early. Our experienced and skilled technicians can repair or replace the rotting areas of the frame, leaving you with windows that are as fresh as new.

Muntins and Mullions

The muntins and mullions that divide your window panes aren't just ornamental They also help to help support the glass. They are a standard part of windows that can be damaged or broken. They can be fake or real, if your muntins and mullions become damaged, chipped or dented it is imperative to have them repaired, because they could be a major detriment to the appearance of your home.

Muntins & Mullions

Although they appear similar and are often confused for one another (perhaps the alliteration helps) Multins and mullions are two distinct window components. A reputable window installation firm will explain the distinctions between them to avoid miscommunication and confusion.

Mullions, or dividers between glass panes, are a typical component of traditional multi-pane windows. In window repairs , they were used to support and separate large sheets of glass. They are an element of decoration and design for your home.

Although mullions aren't the strongest part of your window, they provide some security. If a burglar damages one of your window panes they'll likely break the mullion as well to get into your home.

Putty can be used to repair damaged mullions and muntins. Window repair specialists clean the surface, apply new putty, and then secure them back in place. This is an easy repair to your window that won't impact the window's functionality.

If your windows are leaking or not opening and closing correctly, there could be issues with the sashes, or frames. Certain sashes are stuck in the frames because of broken springs or cords. The sashes may also be too heavy, or they may have fallen off the track. Rebalancing the weights and springs can make a sash difficult to raise or lower.

If you have an older windows with one glass pane the wood strips that keep the glass in place are known as muntins or mullions. If they start to decay, they need to be replaced. Window repair experts will replace damaged muntins and mullions, without affecting the function of your windows.

The sill of old windows may not slope down enough to allow water drainage. It is important to examine the sill and ensure that it slopes downwards, away from the home. If it doesn't the drip cap can easily be put in place. This simple task can reduce the chance of moisture infiltration.

Sashes

If window sashes don't function properly, it's time for an examination of the situation. The weather and time can affect wooden window sashes. If they do not open properly, water or air could enter the room swiftly. Similar events can cause aluminum sashes to become ineffective. The presence of damp or sweat on windows is an indication of such issues.

The most frequent cause of problems with sash is simply wear and tear. They are often fixed by filling, sanding and re-painting. However, more serious problems will require disassembly of the sash. This is a job best left to a professional window repair company.

The sash can be disassembled by first removing the locking pins and the sash cords from the window frame. Then, take out the parting beads (vertical strips of wood holding the upper sash) and then pull out the upper sash. Once the sash has been removed, you can remove and store the hardware of the sash.

The mortise-and tenon joints are held together with wooden pegs. Remove the pegs using the hammer and pin. The pegs are usually larger on one side than the other. Remove the pegs on the smaller end to avoid damaging the sash.

You can see the pockets where glass panes are secured once the sash has been completely removed. The pockets are usually fixed by screws or pins. They should be gently prised using a sharp blade.

Once the pockets are removed the sash can be bedded in new glazing compound. The author beds the sash by putting it up against a homemade easel, and then working the compound into the groove or rabbet around the opening of the pane. After the sash has been stuffed, it is left to dry for two full days before being put back together. The sash is then treated with a homemade wood preserver created using a mix of mineral spirits and boiled linseed oil. This can to reduce the amount of draughts and improve the ability to close and open the window.

Caps for drip Caps

Drip caps are simple, nearly invisible caps that redirect rainwater away from window frames during an event of storm. They are typically made from wood but can also be constructed from bricks or other masonry. Some drip caps are designed to be decorative, while others have a more utilitarian appearance. No matter what the design, a quality drip cap ought to be capable of enduring the elements and keep water from seeping behind casings, where it can cause wood decay.


With a few simple tools and a little know-how, a drip cap can be easily installed by a home owner. However, many homeowners prefer having an expert contractor install their drip cap. A drip cap should be secured to the sheathing around a window, at least one inch from the trim board and should be sloping away from the window. It is crucial to use galvanized nails and to apply a premium exterior sealant of the highest quality to the underside of the drip cap as well as the sheathing.

Drip caps can be purchased in bulk from home improvement stores and window stores or homeowners can make them at home using an aluminum sheet along with a vice and simple tools. To make them, a homeowner must first take off or cut the siding on top of the window, and then cut a drip cap to a length that is slightly larger than the window. After the drip cap has been cut, it's slipped under the tape and nailed using galvanized nails to the sheathing. The cap should be nailed at both ends and attached to the sheathing.