What's Holding Back This Double Glazing Door Lock Repairs Industry? Double Glazing Door Lock Repairs

Have you noticed that your uPVC window or door mechanism become faulty? Maybe the window or door handles don't meet up properly or are hard to use.

You will lose energy in the event that your double-glazed doors fail to function properly. This can also increase the likelihood of burglaries. Owen the Locksmith can fix your door lock for an affordable price.

Snapped Key

It can be a hassle when a key gets stuck into the lock. It also poses a security risk since the door may not be locked and leave you vulnerable to burglars. There are fortunately quick fixes that you can attempt to fix the problem and get your door operating correctly.

Keep calm. If you panic and start doing a lot of fumbling around, you might just end up pushing the broken piece of the key further into the lock, which could make the situation even more difficult.

Spray WD-40, or any other penetrating oil, into the lock. This will allow the broken piece to come out more easily. You can also use the screwdriver to break up any pieces stuck. If you have a chunk of the key that is stuck out and is not being removed, grab it with the help of a paperclip or any other thin metal object and pull it. Both methods work, but be careful not to push the broken key further into the keyway.

Some paperclips have grooved edges which can be used as hook extractors. Jigsaw blades can also work well for this. If you don't happen to have any of these items you can bend a hook using needle-nosed pliers. You can also use a pair tweezers to grasp and pull out the last bit of the broken keys.


If you are unable remove the broken key piece, use a lock deicer. This is usually available at most hardware stores, and it works by freezing any moisture or ice that might be inside the lock.

If none of these solutions work, it could be time to contact a locksmith. Fitlocks experts can quickly fix issues such as broken handles and snapped keys using uPVC locks and door mechanisms. They can also alter the double glazing door mechanisms so that they are easier to operate. You can schedule a double-glazing repair online or call us to discuss your requirements.

Broken Cylinder

A damaged cylinder can pose a serious security threat. It's a good thing that it's a simple repair for an expert locksmith to complete. To fix the cylinder locksmiths will need to tap it. They can do this with an hammer or another tool, but the most efficient method is to make use of a long match or a piece of wire. Then, position the end of the match or wire in the keyway. The locksmith can then strike the lock in order to break it. This is more secure than using a hammer, which can damage the lock.

Overheating is the primary reason behind cylinder heads cracking. This can happen when the cylinder block and head are made of various metals, such as cast iron and aluminum. When different metals are heated and cool at different rates, it can cause localised hotspots that expand faster than the rest of the cylinder head, thus leading to cracks.

Another possible cause of cracks in the cylinder is corrosion. If the cylinder head as well as the block of the cylinder are not maintained properly, this could result in corrosion or rust, which may cause them to expand at a higher rate than they ought to. This can lead to cracks as time passes.

If your uPVC window or door lock is brittle or requires lots of pressure to turn, this could be due to several things. This can be caused by a malfunctioning locking mechanism, or misalignment or a worn-out handle.

Fortunately it is a simple and affordable fix for the majority of homeowners with double glazing. A professional locksmith can usually solve the issue within one hour of arriving at the property. Based on your requirements they will be able to replace the locking mechanism, replace the window handles, or change the gearboxes. A professional locksmith can always advise you on the most cost-effective solutions for your home. They can also suggest upgrades to the highest-security 3 Star euro cylinders TS007 that add an extra layer of protection against burglars. double glazing repair 's a small price to get the peace of mind that comes from knowing that your uPVC door is secure.

Broken Handle

It's not a surprise that window handle locks can break. They have complex mechanisms that become less effective over time. It isn't easy to determine the reason for the problem and repair it correctly.

If the issue is related to the locking mechanism inside or the latch, fixing the broken handle will increase your uPVC double glazing door's security as well as help you to stop drafts. It is costly to replace or repair the handle in a way that isn't done correctly. It could also harm the frame and lock of your door.

With the window open, loosen the screw that secures the handle using a screwdriver. The screw should be on the inside of the back plate, and is normally concealed by an attractive cover for the screw for aesthetic reasons. Be sure to not lose any internal components inside the handle, like the levers or plates on the opposite side of the spindle. Keep them in the same order to make it easier to replace them if needed.

Then, with a second screwdriver take the screw off that connects the handle to the spindle at the back. Once the screw is loose, you should be able to pull the handle away and pull off the damaged spindle. Replace it with a brand new one, ensuring it's the same length as the previous one (you can typically find these on the internet or in hardware stores) and then securely screw it into place. Don't over tighten the screw as this can damage the handle and the window frame.

Close the handle and test it. It should work smoothly, and you will be able open your window once again.

While you're working on the handle, don't forget to check your uPVC windows are shut properly. If they don't cause damp and draughts inside your home, as in addition to compromising the efficiency of your home's energy usage. A local window company, like Core Sash Windows, will be in a position to adjust the hinges on your window frames to ensure they shut correctly.

Broken Spindle

It is usually the case that the spindle within the handle breaks, rather than the handle itself. This is most common in uPVC tilt and turn windows. These windows require a handle that acts as an electronic locking mechanism within the window frame. The handle is attached a central rod that activates a series of cams with a mushroom shape that lock into the window frame keep. If the dead latch mechanism does not open when the handle is turned it is likely that the spindle has broken and this could be an extremely frustrating issue.

Luckily there are ways to remedy this situation. A professional locksmith will be able to quickly and efficiently repair this issue. A professional locksmith can disassemble the window's handle using a tool that removes the wheel from the area that houses the spindle. This can be done without damaging the handle or causing any other damage to the window frame.

Once the wheel is removed the technician can then inspect the spindle and determine what caused it to break. This involves disassembling the spindle, and then examining each component, noting any damage or excessive wear. This process is usually performed by technicians in an environment that is clean.

The next step is to clean the damaged spindle. This will remove any dirt or other debris that might be hindering its normal functioning. The spindle may be replaced or repaired. If the technician is replacing the spindle the dowel can be used that is comparable in size to the original. Then, he will make holes in the same way into both pieces. This will ensure that the spindle fits perfectly with the handle.

If the damaged spindle cannot be repaired, it might require replacement completely. Home centres sell generic substitutes, but if your window design is unusual, you will require contacting an expert in woodworking or cabinet making who can make the exact component. After the spindle is installed, it can be fixed to the handle. The screw holes on the handle with the existing screws in the frame. Once the handle is firmly set, you are able to operate your uPVC windows.