The Most Successful Glazing Repairs Gurus Are Doing 3 Things Glazing Repairs

The right repair of your window will increase the value of your home. It will also ensure that your window or door is operating as efficiently as possible, improving its overall efficiency.

It can be difficult to determine if the problem you encounter requires professional assistance for repair. Here are some of most frequent problems that must be fixed:

Seals that have been damaged

Window seals are an essential component of your glazing system. They protect, insulate and seal windows against the elements of air and water. They are designed to last for a long period of time, however, the reality is that they might require repair or replacement at some point. There are many options for repair, depending on your budget.

Fogging inside your double paned IGU is among the most commonly reported signs that the window seals are failing. Foggy windows result from a damaged seal between the two glass panes of your IGU which allows moisture to be absorbed, causing condensation. Although you can try some quick solutions to remove the fog from your windows, such as using a steamer or window putty, the most effective solution is to get your window seals replaced by a professional.

In addition to allowing condensation and fogging between the window panes, a faulty seal will also cause your windows to lose their insulation value. The space between the two glass panes is filled with an inert gas, like xenon and argon, which helps the IGU ward off heat transfer and keep the heat in the home. Once the window seal fails the insulation benefits of your IGU will be removed and your energy costs will rise.

As time passes rubber gaskets start to degrade due to aging and exposure. The process is accelerated by poor care or by environmental factors like UV radiation. If not addressed, this may cause water intrusion into the building envelope and result in mold and mildew. This can cause damage to the frame and sash of your IGU, ruining the appearance and compromising your insulation.

Avoiding common mistakes and performing regular maintenance are the best ways to avoid window seals being damaged. Avoid using a high-pressure washer to clean windows since it can damage the seal. Don't apply reflective films to your window that is insulated, because it could void the warranty and harm the sealant. Be cautious when using chemicals like paint strippers as they can harm sealant and cause failure.

Broken Glass

Broken glass is a clear issue that requires immediate attention. A glass pane that has broken in a window may fall and break other windows, or create drafts and possibly water or insects to enter your home. A glass pane that is broken can be a danger to anyone who comes into contact with it, particularly pets or children. In addition to being a safety risk broken glass can be difficult to remove and may cause additional damage to frames, sash and the surfaces that are adjacent to it.

The first thing to do when a windowpane is damaged is to wrap it up with a cross-pattern of duct tape to stop further shattering. This will keep insects, rain and debris out of the house until you can replace your glass. This method is particularly crucial for windows that are higher up.

Wear thick, cut-resistant gloves. Also wear eye protection. With a putty or pliers remove the old glazing points out of the frame recesses. Once the glass has been removed, clean all the areas around it to prepare for the installation of a new replacement window.

After measuring the window's opening, it's essential to ensure that the replacement is the exact size. Most glaziers will have standard-sized panes on hand however, if energy-efficient glass or safety glass is required, it could require cutting to fit the frame. To avoid any mistakes make sure you measure the opening of your window and subtract approximately 1/8 to 1/4 inch to fit the new pane.

When you're ready to put in your new glass, be sure to put it in the frame. Make sure it is in a straight line with the rabbets. A new glass pane that's too big could cause clouding and swelling of the wood surrounding it, whereas one that's too small could fall off the frame and allow drafts into your home.

After you've ensured that the new pane is securely secured by a second cord of glaziers' compound around the perimeter of the glass to secure it to the frame and sash. Smooth the compound with your fingers to ensure it is even around the new pane. When dry paint the newly glazed compound and frame to match the rest of your window.

Structural Issues

The structural strength of curtain wall frames and systems is vital to the security and performance of glass surfaces. In an inspection, a professional checks anchor points, fasteners, and supports for corrosion or deterioration. They also look for misalignment. They also inspect the gaskets and sealants to make sure they have been properly installed and aren't leaking.

Rusted frames and sagging walls are structural issues that must be addressed. These problems are dangerous and could lead to severe damage over time. It is essential to fix any structural issues as soon as you can in order to avoid expensive repairs later on.

Curtain wall systems require extensive structural support in order to withstand wind loads and other strains. If these components fail, the water intrusion that occurs can be costly and damaging. The main causes for these failures are due to poor construction, design errors, and inadequate installation.

Warping can also cause distortion or deformed panels, which can impact the appearance, energy efficiency and safety of the system. A glass inspector will look for warping during an inspection and suggests repair steps if required.

The first step of a glazing inspection is to make sure that the area of work has been cleared of all obstructions and that the workers are wearing the appropriate safety equipment. Hard hats, gloves, and high-visibility vests are all part of the safety equipment. You can also utilize a harness and ladder to reach higher or harder-to-reach places.


For windows with wood frames, typical repairs involve a lack of or damaged hardware. Two-part epoxy can be used to repair minor cracks in wooden window panes, but severely damaged or rotten wood should be replaced. Sliding sashes stuck in their tracks can be cleared by sanding them before applying graphite grease. Window companies made of aluminum are typically the ones who handle more complex issues like replacing sliding mechanisms or the major frame or sash parts.

The cost of replacing the curtain wall system is usually greater than the cost of rehabilitation, however the savings in energy consumption as well as the increased comfort of people living in the structure could allow the initial investment to be recouped. In addition, a new system can help bring the existing structure into conformance with more stringent building code requirements for insulated glass and wind load resistance.

Sash Issues

Visual inspections can help diagnose and fix a variety of problems with sash windows. Things like rotting timber and paintwork damage as well as broken glass can all be detected through a professional window inspection, ensuring the window is in good order for future use. Most of the problems that arise can be fixed easily and don't need replacement.

Problems such as the sash not closing or open can be annoying and affect the efficiency of your home. double glazing repairs could also be dangerous if they suddenly slam closed. This could result in injuries, property damage, and a loss of heat or air conditioning.

Sliding windows require regular maintenance to ensure they look good and working properly. Cleaning the window of your sash and spraying lubricant on it can make them easier to open and shut. However, if the issue persists it could be an indication that the balances aren't functioning correctly or that something is wrong with the sash itself.

Wooden window sashes absorb water over time and can be affected when humidity levels change. This causes them to swell and shrink which can cause them to get stuck or trapped in the frame. This can be avoided by keeping an airtight seal around the wood and by regularly applying the sash paint or sealer to guard against moisture.

Other sash issues that can be caused by a defective sash lock cord displacement, nail jamming, which can make sash windows harder to open and close. A carpenter can solve these issues by taking off the sash and replacing or repairing any damaged parts, before reconnecting them.

Stained glass windows can be re-stained to restore their appearance. It is important to keep them in good shape to safeguard the glass from water ingress and rot which can occur when the paint starts to peel and crack. Re-leading stained glass is an additional way to stop it from leaking into surrounding wood and causing decay.