15 Reasons To Not Be Ignoring Double Glazing Repair Why You Should Trust Your Double Glazing Repairs to Local Experts

Replacing double glazing is not an easy task to do yourself however a glass specialist can make it simple and secure. You should also check with the company that sold it to see whether there is a warranty.

Drilling holes in misted windows will allow the condensation to escape, but it is only a temporary fix. Double glazing that has blown must be replaced to restore the thermal efficiency.

Broken window panes

When a window pane is broken, it leaves a gap in the double-glazing which can lead to draughts or moisture. They're not just annoying however, they can also harm your property and your health. The damp conditions can lead to damaged frames, structural issues and other costly repairs.

However, a broken pane is often an easy fix if you know how to fix it correctly. First, take the appropriate precautions to avoid injury such as wearing gloves and eye protection. Then, remove the old glass shards. Use a utility blade to cut through any metal glazing points and glazing putty once you have removed all the shards. When the glass is completely free, carefully remove it from the frame.


After you have cleaned and sanded the surface to remove any paint or gunk It's time to prepare the area for the new glass. Take measurements of the opening from top to bottom and from side to side. Subtract 1/8 inch to take into account any expansion or contraction of the frame. This will ensure that the glass is correctly installed.

Next, roll a cord of glaziers' compound all around the outside edge of the glass-frame joint. Then smooth it out with a putty knife, matching the colour to the rest of the window frame. When double glazing window repairs can paint the compound and the new pane to match the rest of the window.

To stop the crack from spreading, score small arcs using a utility knife just beyond the cracked area. This will curve the crack so that it doesn't grow, allowing you to save your window and avoid the expense of replacing it altogether.

Although you might be tempted to try and do it yourself, this can be extremely difficult without the right tools. It is safer and easier to call a company who specializes in repairs to local double-glazing. This will not only save you a lot of trouble and hassle, but it will also ensure that your double glazing is repaired expertly to the highest standard.

Broken seals

A broken seal could cause windows to lose their insulation properties, resulting in drafts and higher energy bills. It also allows moisture and humidity to get into the space between your window panes, causing condensation and fogging. Foggy windows are an inconvenience and will only get worse over time if you don't take action.

There are many ways you can prevent window seal breaks such as having your windows professionally installed and not washing your windows with power. Even if your windows look good, you should have the seals replaced as soon as possible if you notice any signs that the seal is broken like condensation on the glass or an increase in your energy costs.

The window seals are made of flexible materials which can be damaged as time passes. Older windows are more likely to experience this issue, as are windows that have been exposed to a lot of sunlight. Window seals can also fail due to problems with installation, such as gaps and sloping frames.

While it is possible to fix the broken seal on your windows yourself but the process is complex and damage other components such as argon within the window. It is best to hire an expert to examine your windows and fix any damaged or worn seals.

Once the window seal is replaced, your double glazing will be able to perform just as it should, securing your home from unintentional heat loss and cold air infiltration. This will allow you to save money on your heating and cooling expenses while ensuring your home is cozy.

In the majority of cases, fixing an ineffective window seal is as simple as removal of the window from its sash and then removing the old sealant. Once the window is clean and ready to be put back in then it is refilled with argon gas before being sealed again. While it is possible to do this on your own, it is recommended to call an expert glazier to make sure that the job is done correctly and safely.

Broken door handles

The handle on the front door of your house is a crucial element of your security. It opens the door and hooks onto a latch set into the door's slot frame in order to keep it closed. If the handle of the door feels loose, it can cause issues opening the door. This could be a sign that there are issues with your locking mechanism, too.

Fortunately, fixing a loose door handle is relatively simple. In the majority of cases, you can tighten the screw that holds it in place. If the problem is more severe, you may have to replace the handle.

To begin, you'll need to wedge your door open using a door wedge or stop to ensure that it doesn't close when you work on the handle or knob. This will prevent it from causing damage to the paint, and also allow you access to the entire handle or doorknob without having to worry about the latch slipping.

Next, you'll want to take off the cover plate that sits on the door handle. This may look like a piece of plastic, either rectangular or round, which is designed to hide screws to give it a more clean look. Some might have a tiny slot or detent which you can make use of a flathead screwdriver to press down to open it. Then, you'll need to remove the handle's base and expose the screws holding it in place.

The majority of the screws that secure your doorknob or door handle in place are hidden behind the cover plate. After removing the cover plate, you will be able to easily see all of the screws and tighten as necessary. It is not recommended to tighten too much the screws as it could cause damage to the knob or handle. Once all the screws are tight, you can put the base back on, and then place the handle or knob on top to line up with the screw holes (if you have visible ones) or the detent hole. Check the handle after you're done to verify that it's working correctly.

Chips and scratches

Even the most well-maintained double glazing can be damaged. Cracks chips, dents, and cracks are caused by balls that are stray or a sudden gust of wind. These damage can have a negative impact on the performance of your windows and doors and require replacement. It is crucial to recognize the signs of damage and to notify your installer as quickly as possible. You can help by describing the problem and photos as appropriate.

It may be possible to repair chips or scratches without a lot of effort, based on their severity. If the scratch is deep enough that you can feel it with your fingernail, it may be best to call a glazier to remove it. They can use glass polish to remove it. They'll also be able to offer some tips for maintaining your doors and windows, that will help you keep them in good shape.

Be alert for indications of gas leaks in the space between your window panes. If you notice condensation between the window panes, this could mean that the inert gasses have been vaporized and warm air is now circulating through your home. It is important to contact your installer right away if you observe this issue because it could be covered under your warranty.

If your double-glazed windows are covered by guarantee, you should be able to get reimbursement for any repair costs. It is also possible to switch to a different company that can be trusted to deliver superior quality products and top-quality customer service. Check online reviews, check the BBB or ask for references from previous customers to ensure that you choose a reliable and reputable firm. It is also important to inquire about certifications from major manufacturers and the Fenestration and Glazing Industry Alliance. This will help you to avoid companies who are not licensed to install double glazing.