7 Things You've Never Knew About Mazda Keys Replacement How to Replace a Mazda Key

Mazda is renowned for its ingenuity and intuition technology. Some of these systems improve performance or safety while others make driving around East Stroudsburg Easton and Brodheadsville more comfortable.

The key fob is a fantastic example of the latter. This device lets you lock, unlock, and start your Mazda with a button push. Its battery should be replaced periodically.

Lost Keys

Lost or stolen keys are a major inconvenience. Luckily, it is fairly simple to replace the Mazda key for older models that use regular metal keys, but newer models require programmable computer chips which can only be created by the locksmith or dealer.

To begin, you'll need to have the VIN for your car. This information is available on the dashboard of your car, on the insurance card or on the vehicle's documents. Write down this information to give to the locksmith or dealership.

You'll also require an extra working key. Insert the key into the slot and set the ignition to ON. After about five seconds, take out the key, and switch the ignition off. Repeat the process with the second key. Once both keys have been placed in the car, the new computer chip will pair with your car.

If you lose your keys and don't have a backup, you will need to have the car tow away to a dealer. Then, you'll have to provide proof of ownership, and pay for the replacement key. You may have to wait for a few days as the dealer orders and pairs the replacement key with your car. You can save time and money by hiring a locksmith to replace your key rather than going to the dealer.

Ignition Cylinder Replacement

The ignition cylinder is the component of your Mazda that lets you start the car using an ignition key. If your Mazda isn't turning or you can't insert the key into the switch, you may require replacing the ignition cylinder.

Ignition cylinders are prone to failure more often than keys, which last longer. There is no requirement to adhere to a specific maintenance schedule, but keeping your key clean will make it last longer.

To replace the ignition coil, remove any trim or covers that are blocking the path. Depending on the model this could involve removing the steering wheel cover or removing the wiper and accessory switches. Use a screwdriver or socket wrench to press the release tab of the cylinder. This will free the cylinder from its switch and allow it to slide out.

When the cylinder is taken out then replace it by connecting it to the wires, securing two screws on top, and then replacing the cover of the switch. Reconnect the battery and test the key function of insertion/removal of the new cylinder. Connect the battery, then do this three to five more times. Then, try to start your car to make sure the system is functioning properly.

Remote Control Replacement

If your Mazda key remote stops working, you'll need a professional to get it back up and running. While this isn't as common as a problem with the cylinder of your ignition however, it can happen and can cause you to be stranded in certain situations. Locksmiths can repair the car remote and take care of all programming associated with it.

The bare minimum that you'll need to give locksmiths for them to do this is the year and type of your Mazda vehicle. mazda 6 key fob replacement will enable them to gather the right materials and know if additional programming of keys is required for your Mazda model.

If your key fob won't turn on, it could have a low battery. The best solution in this situation is to reset your receiver, because this is often able to restore functionality. If this doesn't work you will need to replace the batteries. To do this you will need to remove the key and then use a flathead screwdriver wrapped in tape to break the case open on one side. Once you've done this it's time to insert a brand new battery into the key fob. Make sure that it's a compatible battery, and then close the case. The Mazda's RF device will have to be programmed to recognize the key.

Transponder Chip Replacement

If you have an Mazda key fob or a smart key, there is a good chance that your vehicle has a transponder chip in it. This tiny piece of technology, which is basically an micro-motherboard, transmits an indication to the immobilizer in your car when placed in the ignition.


These types of keys are incredibly helpful in terms security, because they block other people from opening your car by ensuring that the sole person who is able to start your vehicle is you. This is why it is important to be careful to make sure that your keys don't be stolen or lost.

A professional locksmith can replace transponder chip. To accomplish this, you'll need to remove the cover from the key fob. Usually it's a small piece of plastic that can be removed with either pliers or a screwdriver. Next, you'll need to take out the chip, which should look like an unassuming black square or a tube that is transparent. Once you've done that, simply place the chip on a piece of tape and attach it near to the ignition lock.

A reputable locksmith should be able complete the task within a short time, and they'll be able to help you get your vehicle back on the road as quickly as they can. Contact a mobile locksmith if you're having problems with your Mazda key.