12 Companies Leading The Way In Window Repair Why Window Repair Is Necessary

Cracks in windows can be caused by a small pebble by a lawnmower or a large beverage placed on your glass-topped table. A broken window can let rain, wind bugs, and other unwelcome elements to enter your home.

There are ways to repair broken glass and stop it from spreading.

Water Damage

Water that is leaking out of your window frame is a sign that you should replace it. The moisture can cause damage to the wood of your window frame and cause the frame to rot. It can also reduce the efficiency of your window's energy consumption. A reputable window manufacturer can replace your windows without damaging the integrity of your existing frames.

Wood rot can impact the inside and outside of your windows. If you have wooden windows with decaying areas, it might be possible to repair them if they're not terribly damaged. However in the event that the rot has spread to your mullions or muntins (the parts of the window frame that support the glass panes) they might need to be replaced. This can be more costly than purchasing a new set.


A failed seal between double-paned window panes is another issue that requires replacement. This could be the result of condensation or debris between the two panes or it could be an indication that your window's insulation has been damaged. Fortunately, a lot of modern windows have the insulation built-in. They won't have the same problems as older windows with multiple panes.

Cracked, loose or rotting the casing around your window is not attractive and could cause other problems. A damaged casing alone doesn't necessarily mean that it's time to change your windows, but. Depending on the condition of your casing and the wood around it you might be able to sand or repaint it to enhance its appearance.

If your exterior casing is in poor condition It is possible to apply a new coat of weather-resistant exterior paint to prevent water from destroying the window. The installation of new exterior casings can be a beautiful and practical improvement to your home.

Paint chipped or peeling

Window frames and sills are usually close to the elements, so they are subject to a lot of damage from precipitation and sunlight. The peeling of paint around windows is primarily caused by moisture, particularly when exposed wood is involved. Water seeps into the wood, and when it evaporates, the pressure beneath the film of paint causes the paint to peel. Moisture may come from condensation in the interior or snow and rain outside. Whatever the cause, it's important to scrape and sand the surface and then repaint the area as soon as the paint begins to chip. Some skilled painters apply a water-repellent preservative, or thinned boiled linseed oil to the bare wood before painting to reduce the penetration of moisture and help the new paint hold better.

If paint begins to peel off the window, it's time for repairing your window. To capture any paint that has strayed onto the floor, place a dropcloth or tarp over the area before applying a new coat. Clean any paint that is loose with a utility blade. Be careful not to cut the wood beneath or cut into the sheathing. Clean the area thoroughly and allow it to dry completely.

Once the area is dry, sand it again with a fine-grit sanding block. This will prepare the surface to receive primer and create a base that is ready to receive paint. If you're working with lead-based paints, be sure to use the proper safety equipment. Tape off any surfaces near to the sanded region, such as baseboards. This will shield them from paint.

You can then prime and paint according the instructions on the tin you are using. Be sure to follow the temperature and curing guidelines on the paint can as they will differ depending on the type. Also, make sure to paint the exterior of the surface with an exterior-grade paint, and the interior with an interior-grade.

Repairing damaged or peeling painted frames is a more affordable alternative to replacing them. If your window frames are damaged beyond repair it could be worth upgrading them to more modern windows that are more energy efficient.

Cracked Glass

A broken window leaves your home open to wind rain, insects and wind. If the break or crack isn't too serious, you can repair it yourself. It is important to address small cracks right away, before they become worse due to temperature changes or time.

While there are numerous methods to make damaged glass invisible, this is a tall order for a DIY project. Even a small chip can create a weak spot in the glass, which can cause more breaks and a costly replacement. Covering the crack with plastic is a great solution. This will cover the crack from the outside, and prevents air or moisture from getting through. window repairs near me could cause damage to the frames or seals around windows.

Before you put on the plastic wear gloves and safety eyewear and remove the broken pane of glass from its frame. Use a utility blade, scraper or chisel, to take off the old glazing points that keep the glass in place. You should also use the knife to pry out any wood that is empty, then clean and seal that area with linseed oil or a clear wood sealer.

You can then make use of epoxy to stick the glass back to its original position. This is the most time-intensive alternative, but it will also give your glass a more robust look. Select the double-cylinder epoxy dispenser that distributes resin and hardener in a similar way. This allows you to control exactly how much is applied to the glass which will ensure a solid seal.

When resetting double- or triple pane windows, be sure that the gas fills are not damaged. These gases are vital for insulating and keeping heat inside your home in the winter and outside during summer. If you remove the window the gasses will escape and cause it to decrease its energy efficiency. You can replace the gas fills with the same method that is used to repair cracks in other types of glass.