From Around The Web Twenty Amazing Infographics About Window Repair Window Repairs

Window repairs can help homeowners save money and ensure their comfort. Window replacement is often required in the event of severe damage, such as broken glass or a broken window frame.

But many other issues can be repaired to extend the lifespan of your windows. The most frequent issues are:

Cracked or broken panes

Whether it's an errant rock being tossed by your lawnmowers, or a tree's branch blown by strong winds, cracked windows are not just ugly, but it can also result in more expensive electricity bills because the broken pieces let cold air to enter your home. It's fairly easy to fix windows with damaged panes.

Begin by carefully removing glass with gloves and safety sunglasses. You may need to employ a utility knife to loosen any remaining putty or old glazing compound around the edges of the frame. Then, clean the surface of the glass and the wood of the frame using a soft cloth or paper towel.

After the area is cleaned and dry, apply a waterproof silicone caulking around the perimeter of the frame. This will prevent water from leaking into the frame through the cracks and cause further damage.

A bad crack in double-paned glass may compromise the gas between the panes, making your windows less efficient in insulating. If the crack is severe enough that it compromises the strength of the window or the inner pane is missing you might need to contact a professional.

Cracks in thermal stress can occur when there's an extreme difference in temperatures between the outside and inside of your home, causing the glass to expand or contract. If this happens across two portions of a window, it's probably best to replace the window instead of trying to repair it.

Clear tape can be used to close cracks in windows that are not yet ready for replacement. It can also keep out cold winds and bugs. You can even cut a piece of nylon stocking or tarp that's large enough to cover the crack and glue it in place with duct tape. This isn't a permanent solution, but it works well in a pinch and it keeps cold air and insects from entering your home. If you notice cracks on your windows that are older You should consult the local company to determine whether replacing the entire window is the best option.

Rotten Wood


Wood rot is among the most frequent issues with windows. It can ruin the appearance of a house and it can also pose danger to your safety. It is possible to fix the wood that has rotted. First, you need to ensure that the root of the rot has been addressed. Look for leaks on the roof and other areas where water could get into the wood.

The next step is to take out any rotten parts of the window frame. This can be done with a claw hammer, chisel, or rasp. After removing the rotten wood, you'll have to replace it with fresh wood. It is recommended to make use of pre-treated wood for this task as it will be resistant to rot. If you are unable to replace the rotted timber you can apply wood hardener and filler to strengthen the damaged area. window repair of product will be found in a lot of hardware stores. Follow the instructions on the label of the product to achieve the most effective results.

After you have repaired the damaged areas of the window sill, it is essential to safeguard the area. Apply a water-resistant sealant on the wood. A product like Sikkens is a great choice to accomplish this task.

You can also apply an epoxy filler that is two-part to protect the wood from further damage. This product is easy to apply and leaves a nice finish. However, it is very important to follow the directions for application on the label. Once the epoxy filler is dry, you can sand the surface of the wood. Start with a rough sandpaper then move on to more smoother grades.

The most important thing you don't want to do is to make the area that is rotting even more by exposed to more water. Therefore, it is a good idea to cover the repaired area with an oil-based primer that will help protect it from moisture. Then, you can apply the waterproof wood sealant.

It won't open

There are many reasons a window won't open. Wood frames can warp in wet weather, the house may have settled or someone could have closed it for security reasons. However, with a little patience and the right tools, most windows that are locked can be opened.

One of the most frequent causes of windows that isn't opening is the accumulation of gunk or debris on its moving parts. Grime and dirt build up on the sliding tracks, hinges and locks over time, says Acme Glass. Metal hardware can also rust when it comes into contact with humidity and direct sunlight. Spray grease on these areas will help to prevent oxidation and ensure that your windows are operating well.

The pulleys that raise or lower the window can be loosened, or break. These parts can lose their tension and cause obstruction especially if the window is located two or more stories higher than the ground.

If you have difficulty opening a door, you can use a pry-bar to gently open the door. Put a piece of wood on the frame to give the pry bar more leverage and be sure not to harm the window or the wood. Alternatively, try running a hair dryer around the edges of the frame for a few minutes to warm the wood and assist it to move more easily.

Another issue for windows that aren't opening is a broken spring that keeps the window jamb from lowering or rising. You'll need to refer to the owner's manual for additional details based on the manufacturer of your windows.

If you have tried cleaning the moving parts of your windows and then lubricating them but they still won't open it could be the right time to replace windows with energy-efficient, new windows from Homespire Windows and Doors. Don't let the windows of your home go from being functional to unusable. A window that isn’t properly shut can expose your home to water damage and burglary. Contact us to learn more about our replacement windows and services today!