The Most Pervasive Issues With Lock Repair How to Fix Common Lock Repair Problems

Stiff locks can be easy to fix with the right oil. Try an penetrating spray or graphite oil and insert your key. Turn it a couple of times to spread the oil.

Periodically tighten door hinges and clean the latch, deadbolt and track. This will prevent doors or handles that are loose from sticking or catching.

Sticky Locks

Locks are used daily and we take for granted until they start to get sticky, or worse, break. Fortunately, the good news is that most times, your locks are in need of some lubrication in order to be able to function properly. This is among the most frequent problems with locks for your home and it is a fairly simple fix, especially when you are aware of what to look for.

The first step is to clean the lock mechanism. Blow out any debris or dust that has found its way into the keyhole with compressed air or canned air. Be cautious not to breathe in the graphite particles, as it could cause illness or infection. After you have cleared the debris, use powdered Graphite to remove the lock. Powdered graphite won't leave any marks or residue on your keys, unlike liquid graphite, which can get onto the lock. If you don't have powdered lubricant on hand, a pencil leads works as an alternative. Insert the key into the lock and then turn it back and forth several times to spread the graphite and help it do its work. After you're done, test the lock to determine if it's working again.


If the lubricant doesn't work, the lock could have been misaligned. This can happen over time, as the door frame moves due to changes in temperatures and weather conditions. A licensed locksmith will be able to examine and fix the alignment of the lock to restore the lock's smooth operation.

If none of these strategies work try spraying a silicone lubricant directly into the lock instead of onto your key. Be sure to buy an exclusive lubricant specifically designed specifically for locks, and not WD-40 or sewing machine oil as these will cause your lock to stick more and trap dirt in the mechanism over time. Also be sure to wipe off any excess lubricant prior to applying, as this will attract more dirt and make the lock stickier.

Broken Keys

Many people try to force a broken lock key out, but this can cause more harm than good. This is particularly true if the key splits inside the lock. If you try to take out the broken part the pins and mechanisms in the lock may become out of alignment. This can make the lock extremely difficult to operate and can lead to breakage. You'll need to call a locksmith if you cannot remove the broken key.

If a significant portion of your key is still hanging out of the lock you can typically make use of needle-nose pliers to grab the key and pull it out. You can make use of household items like paperclips or bobbypins to pull out a broken piece that is stuck deeper inside the lock. Be sure that the object you choose to use is small enough to fit inside the lock and not too thick to touch the sides of the keyway.

In the most extreme instances, you can attempt to employ a small jigsaw or hack saw to remove keys that are broken from your lock. Just be sure that the serrations of the blade are facing back towards the lock, not forward to allow you to hook some of the teeth to the key's breakage. If you can feel the saw teeth latch onto the key that is broken Give it a gentle twist and pull and it will slide out of the lock.

Super glue can also be used to reassemble the key. This is a risky method and could damage the lock cylinder. It is recommended to use it only in the most extreme circumstances. It can be very difficult to find a drop of super glue that is the proper size and consistency to accomplish this, and it could take some trial and error before you master the technique. When attempting to remove a damaged or damaged key from a locked, be aware that too much pressure and improper technique can cause the key to break into smaller pieces, push deeper into the lock, or cause damage to the lock's cylinder.

Damaged Cylinder

Cylinder heads are responsible for sealing and containing the internal combustion pressures and compression of your engine. They also provide passages for coolant in the engine and aid in transferring heat. If car lock repair shop near me are damaged or warped, it may cause issues that affect the performance of the engine and its power. This can lead to poor fuel efficiency, slow acceleration, and difficulty in climbing steep inclines. You can tell that your head of cylinder is suffering damage if you observe signs such as misfires, leaks excessive heat and low compression.

If your head of a cylinder is damaged or distorted, you must be able to repair it immediately. This process is complicated and requires the use of specialized tools and skills which is why it's recommended to leave it to professionals. A skilled mechanic will be able to replace the seals and ensure that the cylinder head is in good condition.

If you're in search of a Reading garage, you should choose one with experience in hydraulic cylinder repairs. They'll be able to diagnose and repair any problems that you may encounter with your hydraulic cylinder, from simple leaks to more serious issues, like a bent rod.

Hydraulic cylinders are utilized in a myriad of fields such as manufacturing, construction and aeronautics. They're designed to stand up to harsh environments, but even the strongest cylinders will suffer from wear and tear from time. If you want to keep your cylinder in top condition it's essential to have it repaired or replaced on a regular basis.

The first step to repairing a hydraulic cylinder is removing the piston and rod assembly. Once you've removed these parts, you can begin disassembling the tube of the cylinder. Start by loosening the set screw and the cap at the end. The lock nut will be removed after that. You can now remove the piston, the head/gland, and the lock nut. Make sure you carefully examine these and other polished parts for damage prior to starting the repair.

Once you've disassembled the head of the cylinder, you can clean it with an oil-based solvent. After cleaning then blow it dry with compressed air. Then you can reassemble it by reinstalling it with the piston, the rod assembly and the gland. Replace the piston seal while making the assembly. Also, install the new locknut.

Sagging Locks

Over time, the door lock screws may loosen and wiggle, which results in your latch not being able to fit into the strike plate hole correctly. This could make it difficult to open the door with the key and a locked that isn't aligned is also more prone to break ins as criminals are able to get getting around the latch and bolt of your door. You'll need a screwdriver order to fix this problem. You'll also have to sand the hinge mortise down to the point that it's not deep enough and replace the hinges to ensure they're flush with the door frame.

Another issue that is common with door locks is that they are stuck and will not turn in any way. It's tempting to bend the bolt back into its original shape but this could end up damaging your lock. If the bolt is damaged, it must be replaced by a locksmith.

If this happens, the first thing to do is examine your door for loose screws and door hinges. You should also test the lock with an alternative key to ensure it's not a problem with the key you've used.

If the issue isn't related to the key, or if the sagging door has resulted in an unaligned lock, you can often fix this by loosening the screws, and then readjusting the mechanism to fit into the strike plate hole properly. You'll need to align both handles and then have someone hold them while you work. Replace any damaged or damaged screws.

Finally, you'll want to grease the lock to aid in making it turn freely again. You can use dry graphite or a lubricant made of silicone but be cautious when choosing the lubricant because it is essential to apply only a light coating and not over-lubricate your lock. Too much lubricant can make it difficult to turn the latch or bolt and too little can lead to the rust to develop.