10 Websites To Help You Learn To Be An Expert In Repairs To Upvc Windows Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to rust or rot.

It is important to clean and oil UPVC doors and windows regularly. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and may even be fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the frame that was previously installed easily. If double glazing repair Wisbech have double-paned windows that are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this case, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

If you are going to attempt to remove the glass panes yourself it is important to wear the proper safety gear, including thick gloves and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor, where they could be trampled.

It's a great idea to seal the gap after the glass is removed. This will prevent drafts and water from getting into your property until a professional is able to fix the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. However, over time, they can suffer from a variety of problems including sagging. A window that is sagging can cause problems with light, draughts or even security. It's important to take action when you discover that your uPVC windows are falling down.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll need to open the window so that you can access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, shut your window and check for an appropriate fit. If you're satisfied with the fit of your window, you can tighten screws to secure them in place.

If you aren't able to move the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and become dry and cause their tightness to decrease. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows are watertight and secure from draughts.


UPVC handles can also become loose. This is typically caused by screws that have become undone over time, but it can also be due to the handle mechanism wearing out. It's relatively easy to fix a loose uPVC handle. First, you'll need to shut the window and then perform an experiment fitting. The corner joints of the sash must be aligned with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it's important to take action. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or is missing.

This is a fairly simple fix that can be completed by any skilled DIYer. Based on the severity of the problem the caulking used previously might need to be removed before a new layer can be applied. It is important to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and could reduce your energy efficiency.

Verify that the drainage holes do not have debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leakage originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open in a breeze, it may be hinges at fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. The process of replacing a hinge on a window is an easy process but it can be simpler when you have a person to help you hold the frame in place.

Check that the uPVC hinges are open and closed in the right direction. You can do this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular way or by improper installation in the factory. Sending us photos through our website can often resolve the problem. We are always happy to offer suggestions.

It is also essential to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also lower the risk of a window sticking and help prevent corrosion. This should be done at least every year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. First, the hinges because of wear and tear, may become displaced, which causes gaps to develop between the sash and the frame. If they are beyond repair, it may be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge side of the window and can also become misaligned, again it may be feasible to give them a good clean, but in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will reduce the possibility of draughts.

One of the most effective ways to reduce draughts is by using a draught excluder, these are usually fabric tubes which are filled with a kind of filler. They can be put on the top of your windowsill. They will help keep cold air out and keep your home warm and cosy!

The windows made of upvc can continue to provide excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to realize that all windows have a lifespan and eventually, they will reach the point when it's more cost-effective to replace them rather than fix them. So, if you're experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as possible.