17 Reasons Why You Should Ignore Repairs To Upvc Windows Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to decay or rust as timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass


The broken glass in your windows can cause serious damage to your home and even be fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and generally fit into frames of the past easily. If you have double-paned windows that are held together by internal beading, it is difficult to remove and replace the old panes. In this case you'll need find some plastic spacers that will aid the new pane in being able to fit correctly into the window frame.

If you are going to try to remove the glass panes yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards will fall onto the fabric instead of onto the floor where they could be trampled on and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the property until a professional can come out and repair the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the gap between the door and the window is substantial, you may prefer an alarm system that has an opening. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they may be afflicted by a variety of problems including sliding. A window that is sagging can cause problems with light, draughts and even security. It's crucial to act when you discover that your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows so you can access the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you are happy with the fit of your window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and become dry and cause them to loosen. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen. The majority of the time it is due to screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to shut the window and do a test fitting. The corners of the sash should be aligned with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it's important to take action. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hamper your efforts to control the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is damaged or is missing.

This is a simple fix that can be done by any DIYer who is competent. Depending on the severity of the problem is, the old caulking may need to be removed. When it is time to uPVC repair, you must avoid 'over-caulking'. This can make your window more difficult to clean and lower its energy efficiency.

Make sure that the drainage holes are free of debris inside them and that the sill pan has been angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to note that if the leak originates from the glass of your double-glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with ease, it may be hinges that are at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical component hinges are prone to wear out over time. The process of replacing a hinge on a window is essentially a very simple process but it can be easier to do when you have a person to help you hold the frame up.

Check that the uPVC hinges are closed and open in the proper direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either by opening the window improperly or due to a poor installation at the factory. This can often be resolved by sending us a photo via our website and we will be happy to give you advice.

It is also crucial to grease the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a great way to do this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It can also reduce the possibility of a window sticking and prevent corrosion. window repair near me to do this once a year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again due to wear and tear may become displaced, which causes a gap to form where the sash joins the frame. If they're beyond repair, it might be required to realign them. The interlock may also become disaligned. This is located on the hinge side and might require to be cleaned. In some cases, it may be necessary to replace the hinges.

The next common cause of draughts is the window seals. These can become worn down or damaged over time, and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping is a good way to stop draughts. Another option is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and will reduce draughts.

Another, and most effective ways to reduce the draughts in your home is to use a draught excluder. These are typically fabric tubes which are filled with a type of filler. They can be positioned on the top of your windowsill. They can keep your home warm by blocking out cold air.

With a little maintenance and repair, your upvc windows will provide an excellent level of security and insulation for your home. It is essential to remember that all windows will eventually wear out and it could be more cost-effective to simply replace them than to repair them. So, if you are having issues with your upvc windows, it's recommended to seek assistance from a professional as soon as possible.