14 Common Misconceptions About Double Glazing Repair Why You Should Trust Your Double Glazing Repairs to Local Experts

It is not possible to replace double glazing by yourself, however an expert glass installer will help make the process simple and safe. You should also check with the company that sold the product to see whether there is an warranty.

Drilling holes in misted windows will let the condensation out, but it is only a temporary fix. Double glazing that has been blown must be replaced in order to restore the thermal efficiency.

Broken window panes

When a window pane breaks it creates a visible gap in the double glazing that could result in draughts or moisture. They're not only annoying but also can damage your property and your health. In double glazing repair near me , rotted frames, structural problems and other costly repairs.

A damaged window is usually easy to fix if you are aware of the proper procedure. Wear eye protection and gloves to safeguard yourself. Then, take out the old glass shards. Make use of a utility blade to cut through any metal glazing points and glazing putty once you have removed all shards. When the glass is completely free to be removed, gently remove it from the frame.

Once you have cleaned the area and sanded it to remove any paint or gunk It is now time to get ready for the new glass. Measure the opening from top to bottom, and from side to side. Subtract 1/8 inch to allow for any expansion and contraction of the frame. This will ensure the glass is correctly installed.

Then, apply a cord of glaziers' compound to the outside edge of the glass-frame joint. Smooth it out with a putty knife, and match the colour of the frame. Once it is dry and you are able to paint the compound and the new pane to match the rest of the window.

To stop the crack from traveling to the next level, cut a small arc with your utility knife just beyond the crack. This will narrow the crack and stop it from spreading, which will save your window from the necessity of replacing it.

Although you might be tempted to try and do it yourself however, it can be very difficult without the proper tools. It is safer and easier to contact a professional who is specialized in repairs to local double-glazing. This will not only save you a lot of hassle, but it will also ensure that your double glazing is repaired professionally to the highest standards.

Broken seals

A leaky seal can cause your windows to lose their insulation properties, leading to drafts and a higher cost for energy. This allows moisture and humidity to enter the window panes causing fogging and condensation. Foggy windows aren't easy to live with and the issue will only worsen over time if it is not addressed.

You can stop window seals from breaking by having your windows professionally installed, and avoid power washing your windows. But, even if your windows are in good shape it is essential to get the window seal replaced as soon as you notice any signs of a fracture, such as condensation between the glass panes or an increase in your energy bill.

The window seals are constructed of flexible materials that can be damaged as time passes. Older windows are more prone to suffer this problem, as are windows that have been exposed to excessive sunlight. Window seals may also fail if there are problems with the installation that result in gaps or uneven frames.

While it is possible to fix the damaged seal on your own but the process is a bit complicated and can damage other components of the windows, for instance the argon gas inside the windows. It is best to hire an expert to look over your windows and repair any damaged or worn seals.

After the window seal has been replaced, your double glazing will function as it should, protecting your home from unwanted heat loss and cold air infiltration. This will help you save money on your heating and cooling expenses while also keeping your home cozy.

In the majority of cases, in order to repair a broken seal on a window, it is required to remove the window from the sash. The old sealant must be removed as well. When the window is clean and ready to be put back in, it will be refilled with argon gas and sealed once more. It is possible to do the job yourself, however it is recommended to consult an expert to ensure that the job is done safely and correctly.

Broken door handles

The handle on the front door of your house is a crucial element of your security. It lets you open the door, and it hooks into a latch that's placed into a slot inside the frame of the door to keep the door closed. If the handle isn't tight this could cause problems opening the door. It could also be a sign that the locking mechanism is not working properly.

It is easy to fix a loose handle on doors. In most cases, you can tighten the screw that holds it in place. If the issue is more severe, you may have to replace the handle.

First, you'll need to wedge the door open with a stop or door wedge so that it does not close when you work on the knob or handle. This will stop it from damaging the paint, and also help you gain access to the entire knob or handle without worrying about the latch being locked.

The next step is to remove the coverplate, which is placed over the door handle. It could appear to be a round or rectangular piece of plastic that's designed to conceal the screws for a more attractive appearance. Some may have a small slot or detent which you can use a flathead screwdriver to press down on to release it. You will then need to remove the handle's base and expose the screws holding it in the position.


The cover plate hides the majority of the screws holding your door knob or handle in place. After you've removed the cover plate you'll be able to see each one and tighten them as necessary. Make sure you don't over-tighten the screws, as this can damage the handle or knob. Once all the screws are tight, you can put the base back on, and then place the knob or handle on top to line up with either the screw holes (if there are visible holes) or the detent hole. After you've finished, test out the handle to make sure it's working properly.

Chips and scratches

Even the best maintained double glazing can be damaged. It's only just a few smacks from random footballs or a sudden jolt of wind to cause chips, cracks and scratches. These can alter the performance of your windows and doors which then need to be replaced with new ones. It is crucial to recognize the signs of damage, and to contact your installer as soon as possible. It is helpful if you can supply the details of the problem along with photos where relevant.

It is possible to fix chips or scratches without a lot of effort, based on their severity. If the scratch is severe enough that you can feel it with your fingernail it may be best to call a glazier to remove it. They will be able to use glass polish to remove the scratch. They can also give you some tips for maintaining your doors and windows in good shape.

You should also watch out for indications that the gas cavity between your window panes is causing a leak. If you see condensation between the window panes, it could indicate that the inert gasses have evaporated and warm indoor air is now circulating through your home. It is crucial to notify your installer right away if you spot this issue, since it could be covered by your warranty.

If your double-glazed window is covered by a guarantee, you are able to claim any repair costs. You could also consider switching to a different company that can be trusted to deliver top-quality products and exceptional customer service. Look up online reviews, verify the BBB or ask for references from past customers to make sure you choose a professional and reliable company. You should also inquire about the certifications of major manufacturers and the Fenestration and Glazing Industry Alliance. This will enable you to stay clear of companies that are not authorized to install your double glazing.