9 Signs You're A Kia Sportage Key Expert Replacing a Dead Kia Ceed Key Fob

Kia Ceed drivers love the convenience of remote entry. However, like any other device, the key fob can be inoperable for a variety of reasons. The battery can be easily and inexpensively replaced.

The key fob is powered by a 2032 lithium coin battery often referred to as CRC2032 and used in many other electronic devices. A standard flathead screwdriver is all that is required to open the key fob and replace the battery.

Keyless entry

The smart key fob for the KIACeed is a feature that's becoming more popular making it simpler to lock open, lock, and start the vehicle. If yours isn't working, it could be because of a dead battery or other problems. If the battery doesn't function properly, it could affect its functions as well as the electronics within. Check the metal clips on the fob, and make sure they're fully connected. It is possible to clean the fob with isopropyl or a cloth to get rid of any traces of water.

The push buttons on the key fobs within the door handles transmit LF-antenna signal to the vehicle. The vehicle's LF transmitters located in the tailgate, trunk or door handles are able to read the test. They then send the response. This information is transmitted over the serial communication line that comes from the SMK ECU.

If you're experiencing problems with your Kia Ceed key fob it's essential to correct the issue before it worsens. It's easy to replace the battery on your Kia key fob. It's only a few moments. First, locate a small slot on one side of the key fob. It's usually in the opposite direction to the key hole. Remove the plastic casing gently inserting a flathead screwsdriver into the slot.

Remote start

There are a few things you can do if your Kia Ceed remote start key fob is not working. First, you must check the battery on your key fob. If it is dead, the remote will not function. Check the battery connections next. If they're corroded the battery might not receive an electric current. If the issue persists you may try resetting the system. To do this, disconnect the battery that is 12 volts for a short period of time. This will allow any residual power to be depleted and the system to be reset.

The internal chip in the key fob could stop working if it is exposed to water. kia replacement car keys is recommended to make use of clean tapwater to wash the key fob, and then let it completely dry before replacing the battery. You can clean the key fob using isopropyl or an electronic cleaner. In certain situations the key fob might stop working after being dropped on the floor. This is due to damage to the microchip inside.


The key fob could also not function due to signal interference. This can be caused by weather conditions, objects in close proximity to the vehicle, or transmitters that operate at the same frequency as the key fob. This issue can be solved by changing the key fob's programming. This can be accomplished by turning the key from off to on in the ignition until the door locks start to cycle.

Keyless lock

Key fobs are a great convenience for many drivers, but it can also break easily. A dead battery is the most frequent reason however, you could also have a problem with the door locks. The good news is, an easy trip to the dealership should be enough to fix your problem.

Smart key features on the Kia Ceed make life easier for you by allowing the unlocking of your car without having to remove it from your purse or pocket. To unlock your car just place the key fob in close to the vehicle and press the lock button once for the driver's door or twice for all doors as well as the trunk.

Both the regular and smart Kia key fobs use a standard 2032 battery that is available in most supermarkets and online stores. This kind of battery can also be used to power other small electronic devices, such as watches and calculators. To replace the battery, you will need to locate the small button that opens the mechanical blade of the key, and remove it. Then, put the new battery into a slot that exactly matches the size of the emergency key blade.

If you are experiencing problems with your key fob, be sure that all clips made of metal are securely fastened and there isn't any evidence of water damage. You should also clean the contact points regularly. If these methods don't work then you might have to visit an authorized dealer to get programming.

Remote trunk release

By using the key fob you can unlock and lock your Kia Ceed trunk or tailgate remotely. This feature is especially useful when you are away from your vehicle and want to ensure that the trunk is not locked or open. To activate this feature, hold and press the button on your Smart Keyboard for at least a half-second. Press the button to turn it off. This key fob feature can be used to set off the panic alarm in your car, which could deter potential thieves and help find your vehicle in a parking lot that is huge.

The most frequent reason for a Kia key fob not working is a dead coin battery in the key fob. You could replace the battery within just a few minutes. To complete this task, you'll require a flathead screwdriver, as well as the key fob's replacement case. Locate the small slot on the side. Insert the screwdriver inside the slot, and gently press it until the case is removed. Then, take out the battery that was in use and replace it with a new one.

Another reason you could have for your Kia key fob to stop working is water damage. It could happen when the key fob is wet. For example dropping it in the rain or spill water on it. You must clean the electronic component with isopropyl and paper towels prior to changing the program. You may also try resetting the on-board computer by disconnecting the 12 Volt battery for a short period of time.