Ten Startups That Will Revolutionize The Repairs To Upvc Windows Industry For The Better Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good repair.

For single pane windows, it is fairly easy to replace them, and the new window is usually able to fit into the old frame very easily. However when you have double pane windows that are anchored by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this situation you'll need to source some plastic spacers that will assist the new pane to fit properly into the window frame.

If you plan attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also an excellent idea to lay down a dropcloth before you start working on the glass, so that any fragments of glass fall onto the cloth instead of landing on the floor where they can be trampled upon and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will stop water and drafts from entering your property until a professional is able to fix the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the distance between the window and the door is significant, you may want to use a security screen that also has a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. However, over time, they are susceptible to a range of issues, including sliding. A window that is sagging can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from worsening.

To fix a sagging window you can try repositioning the hinges. To do this, you'll have to open the window so that you can get to the frame. After that, using the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, shut your window and verify the fitting. If you're happy with the fit, tighten the screws to ensure they remain in position.

If you are unable to reposition the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause them to lose tightness. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows remain watertight and draught-proof.

UPVC handles can also loosen up. This is usually due to screws that have loosened over time, but it can also be due to the mechanism of the handle getting worn out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. The first step is to close the window and perform a test fit. The corner joints of the sash should align with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it's crucial to take action. Windows that leak water do can not only cause degrading of the structure of your home but also hamper your efforts to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is damaged or is missing.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how severe the problem is, the old caulking may need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.

Check that any drainage holes are free of debris in them, and also ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can quickly spread across the home.

It is also important to remember that if the leakage is coming from between the glass of your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open in a breeze it could be hinges that are at fault. They can be easily repaired by any skilled DIYer and can be completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that have hinges and like any mechanical part they can wear down over time. The process of replacing a hinge on a window is an easy procedure, but it is easier when you have a person to assist in holding the frame in place.


Check that the uPVC hinges are open and closed in the right direction. You can do this by checking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The issue can be caused either by opening the window improperly or due to a poor installation at the factory. Sending window repair near me through our website can often solve the issue. We are always happy to offer suggestions.

It is also essential to grease the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a window getting stuck and stop corrosion. Ideally, you should perform this every year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. First, the hinges due to wear and tear can become misaligned, this will cause a gap to form where the sash meets the frame. This can be easily fixed by giving them a good cleaning, but in the event that they are beyond repair it might be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge side of the window, can be misaligned. Again, it's possible to just give them a clean but in certain cases, it may be necessary to have them replaced.

The next common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping will help to stop draughts. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and will reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. These will keep your home warm by blocking cold air.

Your upvc windows can continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it is cheaper to replace them rather than repair them. If you encounter any issues with your Upvc window it is recommended to speak with an expert immediately.