15 Funny People Working Secretly In Repairs To Upvc Windows Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain, durable and long-lasting. They do not decay or rust as aluminum and timber.

It is crucial to wash and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace and generally fit into frames of the past easily. However If windows with double panes are anchored by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this instance, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric, not onto the floor and could be trampled.

Once the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to block water and drafts from entering the home until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders from gaining entry into your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can develop a variety of issues, including sliding. A sagging uPVC window could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from worsening.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to open the windows so you can reach the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and verify the fit. If you're happy with the fit, you can tighten the screws to ensure that they stay in place.

If you are unable to reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to loosen. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows are watertight and safe from drafts.


UPVC handles can also loosen. This is often caused by screws that have loosened over time, but it could be caused by the handle mechanism wears out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close the window and perform an experiment fit. The corners of the sash should align with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it is important that you take action. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

This is a fairly simple fix that can be completed by any skilled DIYer. Based on the severity of the issue the old caulking might need to be removed before a new layer can be put on. It is important to keep in mind that when it comes to uPVC window repair s, do avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe instances, you may need to replace the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the problem is related to the seal, not the frame. Again this can easily be repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with a breeze it could be hinges at the fault. These are easily repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Like all mechanical parts hinges will wear out over time. Changing a window hinge is an easy procedure, but it is easier with someone else to help you hold the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue could be caused either by opening the window improperly or by a poor installation in the factory. Sending us photos through our website can often solve the issue. We are happy to provide suggestions.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also lower the chance of windows sticking and prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges, also because of wear and tear, may become displaced, which can cause an opening to appear where the sash meets the frame. They can be repaired by giving them a good clean, but when they're beyond repair, it could be necessary to get them aligned or replaced. The interlock, which is on the hinge side of the window and can also become misaligned, again it may be possible to just give them a good clean, but in certain cases, it may be necessary to have them replaced.

These seals can wear down or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and lessen the risk of draughts.

Lastly, one of the most effective ways to cut down on draughts is by using an draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be placed on the windowsill on top. These will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs, your upvc windows will continue to provide an excellent level of insulation and security for your home. However, it is important to realize that all windows have a life span and eventually, they will reach a point where it is more cost-effective to replace them rather than fix them. If you encounter any issues with your window made of upvc, it's best to consult a professional immediately.