Your Family Will Thank You For Getting This Peugeot Keys Peugeot 208 Key Replacement

It is recommended to leave the replacement of Peugeot keys 208 to auto locksmiths with the required equipment and expertise. They will be able to create and program new keys faster than a dealership would and at a cheaper cost.

A dead battery for your coin is the most likely cause when your key fob stops locking or unlocking the doors. There are other causes why the key may be malfunctioning.

Dead Coin Battery

A dead coin battery can stop your Peugeot 208 from locking or unlocking and won't start the engine. If this is the case, you'll have to make use of the backup starting procedure which is explained in the owner's manual for your vehicle.

Another reason why your 208 may not start is because the spark plugs have worn down. Spark plugs are what ignite the fuel to start the engine. However they have a short lifespan. If they are not used enough they will eventually fail.

Luckily, there is an easy solution to this issue. Check the voltage of the battery with a multimeter. If TheKeyLab is below 11.5 volts and you are not satisfied, then it is time to replace it. If the battery is corroded it is essential to clean its contacts. This can be accomplished by removing the rubber covers off the two battery terminals and then using a wirebrush to clean any parts of the battery that are corroded. You should then reconnect the cables for the positive and negative poles.

Water Damage

If your 208 won't start and the battery isn't running, then make sure that the spark plugs are working. It is possible that they are overly dirty, which causes them not to spark. This can be fixed easily by cleaning the spark plugs in an workshop.

Peugeot cars are equipped with a transponder style key that integrates with the car's immobiliser system. This makes sure that only the correct key is able to start the engine. If the chip inside the Peugeot key is damaged, then it will not send the correct signal to the vehicle.

Water damage is a frequent reason for this issue. This is especially prevalent in colder climates, where the vehicle may have been exposed to snow or rain. In this case, contact a trusted locksmith who has the tools and equipment required to modify the key. They also have the latest technology and the machinery needed to make a Peugeot 208 smart key. The process shouldn't take more than 15 minutes.

Faulty battery contacts


Peugeot replaced the transponder chips using a new model that utilizes electronic components mounted on a circuitboard. This new technology works great when it's fresh, however, over time, the circuit boards start to wear out and stop functioning correctly.

This could prevent the immobiliser from working, so the vehicle won't start. If this happens it's a good idea to call a Peugeot specialist or locksmith.

The most frequent issue is when the battery inside the key fob starts to fail. This causes the blade of the key to stop feeding into the lock. A car locksmith will replace the battery and then cut a fresh blade for you. This is a simple fix.

Faulty Receiver Module

If your Peugeot key fob stopped working after dropping it on the floor, getting exposed to a sudden downpour or accidentally washing it may be due to a malfunctioning receiver module. The receiver module is responsible for transmitting radio frequency to the onboard computer that controls the central locking system of your Peugeot vehicle.

The key fob itself is fitted with rubber seals that block water from getting to the electronic chip inside. Water can damage the chip when exposed to water for a long period of. The high salt content in the pool or ocean water can cause damage to the key fob, especially if it is submerged.

The module will need to be replaced if the Peugeot spare key isn't working anymore. This can only be completed by an experienced auto locksmith or Peugeot specialist. In contrast to other vehicles, Peugeot keys are protected by an exclusive immobilizer system that requires the correct coding to begin the engine. This is the reason that you should only rely on a Peugeot locksmith to create and program a replacement.

Computer with a problem on board

The on-board computer inside your Peugeot is responsible for a number of the systems in your car, from airbags to power windows. The on-board computer displays the code when something goes wrong. This code will be stored within the system until the problem is resolved. This may require the on-board computers to be replaced.

One of the most frequent causes of the light flashing is loose or corroded connection in the airbag sensor. This can be caused by wear and tear, ageing or exposure to salt and moisture. It is crucial to get this issue addressed as quickly as possible, since the airbag malfunctioning could be dangerous in the event an accident.

If you notice an error message that says "card not found" on your Peugeot, the key battery in the key fob may be dead or weak. This prevents the key fob from sending a signal to disable your vehicle's standard immobilizer. You can test this by pressing the unlock button on the key fob, then trying to start your vehicle. If this doesn't work, then the key battery needs to be replaced.