What You Should Be Focusing On Enhancing Window Repair Window Repairs

Window repairs can help homeowners save money and maintain their comfort. In the event of severe damages, like broken glass or a shattered frame, a window replacement could be necessary.

But there are many other issues that can be addressed to extend the life of your windows. Common issues include:

Cracked or broken Panes

Cracked window glass can be caused by a lawnmowers who throws errant rocks or by branches of trees being blown by strong winds. This not only looks awful, but it could result in higher energy bills because broken glass lets cold air into your home. Fortunately, it's generally easy to fix windows with cracked panes.

Begin by carefully removing glass with gloves and safety sunglasses. You may need to employ a utility knife to remove any remaining putty or old glazing compound around the edges of the frame. Then, clean the glass's surface and the frame's wood using a soft cloth or paper towel.


After cleaning the area, apply silicone caulking that is waterproof around the frame's perimeter. This will prevent water from leaking into the frame through the cracks and causing further damage.

If you have double-pane glass, a bad crack could compromise the gas layer between the panes, making your windows less efficient in insulating. If the crack is so extensive that it compromises the strength of the window or the inner pane is missing you might need to contact a professional.

double glazing repairs St Albans may also occur when there is a drastic difference in temperature inside and outside your home. This causes the glass to expand and shrink. If this happens across two windows it's best to replace the glass instead of trying to repair it.

Clear tape can be used to close cracks in windows that are not yet ready for replacement. It also keeps out bugs and cold wind. You can cut a piece of nylon stocking or tarp sufficient to cover the crack and glue it in place with duct tape. This is not an end-to-end solution, but it's a good way to keep cold air out and insects away from your home. If your windows are older and you're starting to notice cracks in the glass It's a good idea to check with the local window company about whether replacing the entire window might be a better alternative for you.

Rotten Wood

Wood rot is one of the most frequent issues with windows. It can ruin a house's appearance and create a security danger. It is, however, possible to fix rotted wood. First, you will need to ensure that the cause of the rot has been addressed. Look for leaks on the roof and other places that water may get into the wood.

You will then need to take out the rotten components of the window frame. This can be accomplished with a claw hammer, chisel or a rasp. After the rotten areas have been eliminated it is time to replace them with fresh wood. Pre-treated wood is recommended for this project since it is resistant to rot. If you cannot replace the timber that has rotted then you can use wood hardener and filler to strengthen the damaged area. This kind of product will be available at a majority of hardware stores. To achieve the best results, make sure you follow the directions on the label.

Once you have replaced the rotten areas of the windowsill, it is important to protect the repaired area. Apply a water-resistant sealant to the wood. A product like Sikkens is a good choice for this job.

Use a two-part epoxy in order to protect the wood from further damage. This product is easy to apply and gives a good finish. It is essential to follow the instructions on the label. After the epoxy filler dries, you can sand down the wood's surface. Start with a rough sandpaper and then move on to an easier grade.

You do not want to expose the damaged area to more moisture. It is a good idea, that's why you should protect the surface you have repaired with an oil-based primer that will protect it from moisture. After that, you are able to reapply the wood sealant that is waterproof.

The website won't work

A window that isn't opening can be the result of a variety of reasons. The house might have shifted or the wooden frames could have warped during wet weather. Someone might have also secured them with a nail for security. However, with a bit of patience and the right tools, many windows that are locked can be opened.

The accumulation of gunk or debris could be the main cause of a window not opening. Dirt and grime build up on the sliding tracks, hinges, and locks over time, according to Acme Glass. Metal hardware can also rust if it comes into contact humidity and direct sunlight. Keeping these areas lubricated with spray grease can help to prevent oxidation and keep your window operating correctly.

The pulleys that raise or lower the window may become loose, or break. These parts can lose their tension and cause obstruction, especially when the window is two or more stories above the ground.

If you're having trouble opening the window, try using a pry bar to gently force the window open a little at one time. Put a piece of wood on the frame to give the pry bar more leverage and be careful not to damage the window or the wood. Alternately, you can run a hair dryer along the edges of the frame for several minutes to warm the wood and allow it to move more easily.

A broken spring could be the reason for windows that aren't able to raise or lower. You will need to consult your owner's guide for more information depending on who made your windows.

If you've tried cleaning and lubricating the moving parts of your windows, but they still won’t open, then it's probably time to replace them. Homespire Windows & Doors offers windows that are energy efficient. Don't let your windows slide from functional to inoperable because windows that aren't properly closed can make your home vulnerable to water damage and burglary. Contact us today to learn more about our replacement windows and services!