8 Tips To Up Your Glazing Repairs Game Glazing Repairs

The right repair of your window will increase the value of your home. It also ensures that your door or window is working as well as it can, enhancing its overall efficiency.

It can be tricky to know whether the issue you're experiencing requires professional attention. Here are some of most common problems that need to be addressed:

Damaged Seals

Window seals are a crucial part of your glazing system. They are used to secure, insulate and seal windows against outside air and moisture. They are designed to last for a long time however, the reality is that they may need repair or replacement at some time. The good news is there are many options for repairs according to your budget and timeframe.

Fogging in your double paned IGU is one of the most common indicators that your window seals have failed. Foggy windows could be the result of an unsound seal between two glass panes of your IGU. This can allow moisture to enter the IGU and cause condensation. Steamers are a great option to remove the fog from your windows or apply window putty. However, it is recommended to fix your window seals by an experienced professional.

In addition to allowing condensation and fogging between the window panes, a faulty seal will also cause your windows to lose their insulating value. The space between the two panes of glass is filled with an inert gas like xenon and argon, which helps the IGU resist heat transfer and keep heat in the home. Once the window seal fails the insulation benefits of your IGU will be lost and your energy bills will increase.


As time passes, rubber gaskets will begin to lose their elasticity due to aging and exposure. The degradation can be accelerated by improper treatment or environmental factors such as UV radiation. If not addressed, this can cause water infiltration into the building envelope and result in mold and mildew. This can cause damage to the frame and sash on your IGU, destroying the appearance and compromising insulation.

Avoiding common mistakes and performing regular maintenance are the best ways to avoid window seals falling apart. Avoid using a high-pressure washer to clean windows since it could damage the seal. Don't apply reflective film to your insulated window, as this could void the warranty and harm the sealant. Also, be cautious when using chemicals such as paint strippers because they can cause damage to the sealant and cause it to fail.

Broken Glass

Broken glass is a concern that needs immediate attention. A broken pane in a window can fall and break further windows or cause a draft and even insects or water to enter your home. A broken glass pane can be a danger to anyone who comes into contact with it, including children or pets. Glass that has been broken is not just a safety risk, but it can also be difficult to get rid of and cause further damage to frames and sash as well as other surfaces.

When a windowpane cracks, the first step is to tape it up with a cross-patch of ducttape to prevent further shattering and keep bugs, rain, and debris out of your home until you can replace the glass. This is particularly important for windows that are higher up.

Wear thick, cut-resistant gloves. Also, wear eye protection. With a putty or pliers take the old glazing points out of the recesses of the frame. Once the glass has been removed, wash the surrounding areas to prepare for the new replacement window.

It is important to measure the opening of your window and ensure that the replacement is the proper size. Most glaziers will have standard-sized panes on hand however, if energy-efficient glass or safety glass is required, it might require cutting to fit the frame. To avoid a mistake take a measurement of the window opening and subtract about 1/8 to 1/4 inch to fit the new pane.

When you're ready to install your glass, take care to place it into the frame. Make sure that it's perfectly with the rabbets. A glass pane too large could cause the wood to expand, and a pane too small can be thrown out of the frame, or allow drafts enter.

Once the new pane is secured, you can wrap another piece of glaziers' compound around the perimeter of the pane to seal the glass to the frame and sash. Smooth the compound with your finger, ensuring that it's evenly distributed across the new pane. Once dry paint the newly glazed frame and compound to match the rest of your window.

Structural Issues

The structural strength of curtain wall frameworks and systems for framing is essential to the safety and performance of glazed surfaces. During an inspection, a professional will check fasteners, anchors and supports to determine if they are corroded, deteriorated, or misaligned. He or she will also check the sealants and rubber gaskets to ensure they have been installed correctly and aren't leaking.

Rusted frames and sagging wall are structural issues that need to be addressed. These issues can be extremely dangerous and may lead to serious damage over time. It is essential to address any structural issues as soon as possible to avoid costly repairs down the road.

Curtain wall systems require extensive structural support to withstand winds, and other stresses. When these components fail, the water intrusion that results could be destructive and costly. The main causes for the failures are poor construction, design errors, and inadequate installation.

Another common problem is warping. This can cause distorted or deformed glass panels that can affect the system's appearance, energy efficiency, and security. A glazing inspector looks for warping during an inspection and suggests repair actions if necessary.

The first step in a glazing inspection is to make sure that the area of work has been cleared of all obstructions and that employees are wearing appropriate safety gear. Hard hats, gloves, and high-visibility vests form part of the safety gear. You can also utilize a ladder and harness to reach higher or more difficult to reach places.

Common repairs for wood-framed windows include loose or missing hardware. A few minor cracks on windows made of wood can be repaired with an epoxy that is two-part, but damaged or rotted wood is usually best replaced. Sliding sashes stuck in their tracks can be removed by sanding them and applying graphite grease. More stubborn problems like replacing sliding mechanisms or major frame or sash parts are typically left to aluminum window manufacturers.

Replacing an existing curtain wall system usually involves the cost of installation is much higher than rehabilitation, however the energy savings and improved quality of life for the occupants may eventually cover the initial investment. A new system could help bring an existing structure in compliance with the more stringent standards of building codes for insulation of glass and wind load resistance.

Sash Issues

Many issues with sash windows can be easily identified and dealt with through a visual examination. A professional assessment of the window can detect things like wood that is rotting and paintwork damage as well as broken glass, ensuring that the window is in good shape for its future use. Fortunately, the most common issues aren't as serious and don't necessarily necessitate replacement.

Issues like a sash that doesn't close or open can be annoying and affect the efficiency of your home. It's also risky when windows suddenly snap shut and cause injuries, property damage, and loss of cool air or heat.

Regular maintenance is essential to keep sliding sash windows looking good and operating properly. Cleaning your sash windows and applying a lubricant spray will allow them to open and close more quickly. However, if the problem persists it could be an indication that the balances aren't operating properly or there's something wrong with the sash itself.

Over double glazing repair , wooden window sashes can absorb moisture and can be affected by changes in humidity levels. This causes them to swell and shrink which can cause them to become stuck or clogged within the frame. This can be prevented by maintaining a tight seal around the wood, and by applying an sash sealer or paint to guard against moisture.

Other issues with sash windows include a damaged lock, cord displacement and nail jamming. These all make it difficult to open and close sash windows. A carpenter can solve these problems by removing the sash, replacing or repairing any damaged parts, and then reconnecting them.

It is possible to re-stain stained windows to restore their original appearance. It is important to maintain them in good shape to avoid water ingress and rot, as well as other issues that may arise when the paint begins to peel and crack. Stained glass can also be re-leaded in order to prevent it from leaking water onto the surrounding timber and causing decay of the wood.