10 Websites To Help You To Become A Proficient In Repairs To Upvc Windows Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to rust or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good shape.

For single pane windows, it can be relatively simple to replace them, and the replacement will usually fit inside the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance you'll need locate some plastic spacers that assist the new pane to fit properly into the window frame.

If you plan to attempt to remove the window panes yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled.

After the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to stop drafts and water from entering the property until a professional can come out and fix the window. This will also provide a barrier to prevent any criminals from getting into your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. Over time, they can develop a variety of issues such as sliding. A sagging window in uPVC can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from becoming worse.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll need to open the window so that you can get to the frame. With a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and test it for an appropriate fit. If you're satisfied with the fit of your window, you can tighten screws to keep them in the right position.

If you aren't able to move the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, leading them to lose their tightness. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is usually due to screws that have loosened over time, but it could be due to the mechanism of the handle getting worn out. It's fairly simple to fix a loose uPVC handle. The first step is to close the window and then perform a test fit. The corners of the sash should be aligned with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

It is important to take action if wake up every morning to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on the severity of the issue the caulking that was used up may require removal before a new layer can be applied. It is essential to keep in mind that when it is about uPVC window repair s, you should not be tempted to apply too much caulk and then make the area more difficult to clean and could reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more extreme cases, you may need to replace the window.


Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to note that if the leakage originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open, or if it opens with an ease. They can be easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. It's very simple to change the hinges on a window, but it's easier if someone helps hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. This can be done by looking for the arrow on each hinge. This shows which way the window should be opened.

The problem can be caused either by opening the window incorrectly or due to a poor installation in the factory. This issue can be fixed by sending us a photo via our website and we will be more than happy to give you suggestions.

It is also crucial to grease the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by various factors. The hinges, also because of wear and tear, could become misaligned. This can cause gaps to develop between the sash and the frame. They can be repaired by giving them a good clean, but when they're beyond repair, it could be necessary to get them aligned or replaced. The interlock may be unbalanced. It is located on the hinge's side and could require to be cleaned. In some instances it is possible to replace the hinges.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and will lessen the risk of draughts.

One of the most effective ways to reduce draughts is by using an draught excluder. These are typically made of fabric which are filled with a type of filler. They can be placed on the windowsill on top. They will keep your home warm by blocking out cold air.

With a little maintenance and repairs, your upvc windows will provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows eventually get worn out and it could be more cost-effective to replace them instead of fixing them. If you are experiencing issues with your upvc window, it's best to consult an expert immediately.