What Freud Can Teach Us About Double Glazing Door Lock Repairs Double Glazing Door Lock Repairs

Is your uPVC door or window mechanism broken? Maybe the handles on your uPVC windows or doors aren't aligned correctly or are difficult to operate.

It is crucial that the double glazed doors operate smoothly, otherwise you'll be wasting energy and increase the likelihood of burglary. Owen the Locksmith can fix your door lock at reasonable costs.

Snapped Key

If a key breaks inside a lock, it can be extremely difficult. It's also potentially a security risk since the door may not lock and leave you open to intrusion. There are a couple of quick fixes you can try to fix the problem and get your door working again.

Be sure to remain calm. If you panic you may end up pushing the damaged key piece further into the lock.

Spray WD-40, or another penetrating lubricant into the lock. This will allow the broken piece to emerge more easily. You can also employ a screwdriver in order to break up any pieces stuck that might be blocking the way. If you have a part of the key that's stuck out and is not being removed, grab it with the help of a paperclip or any other thin metal object and pull it. Both methods are effective, but you need to be careful not to push the broken key further into the keyway.

Some paperclips have grooved edges that can be used as a hook extractor and jigsaw blades are also suitable for this use. If you do not have any of these handy, you can make use of needle-nose pliers to bend and create hooks. Finally, a pair of tweezers is a good way to grip and remove the remaining piece of the key that was broken.

If you are unable to remove the broken piece of key Use a lock deicer. It's available in many hardware stores and is used to freeze any moisture that may be present within the lock.

If none of these solutions seem to work, it may be time to contact a locksmith. Fitlocks specialists are able to quickly resolve issues with uPVC door mechanisms and locks, including snapped keys and broken handles. They can also alter your double glazing door mechanisms to make them more user-friendly. You can request repairs to your double-glazing online or call us to discuss your requirements.

Broken Cylinder

A broken cylinder can be an extremely risky security issue. Luckily, it's an easy repair for professional locksmiths to complete. Locksmiths will need to tap the cylinder in order to fix it. They can do this with the hammer or any other tools, but the most effective method is to employ a long match or piece of wire. Then, place the match's end or wire close to the keyway. The locksmith can then strike the lock in order to break it. This is much better than using a hammer, which could harm the lock.

Overheating is the main reason behind cylinder heads cracking. This can occur when the cylinder block and cylinder head are made of various metals, including cast iron and aluminium. Different metals will be heated and cool at different rates. This can cause localized hotspots to expand more quickly than the rest.

Corrosion is a different reason for cracks in the cylinder. If the head and block of the cylinder are not maintained properly they may rust or corrode and cause them to expand more than they would normally. This could lead to cracks over time.

If your uPVC window lock or door is stiff or requires an enormous amount of pressure to turn, it can be caused by many things. This issue could be caused by a malfunctioning locking mechanism or misalignment and also a worn out handle.

It is a quick and affordable fix that the majority of double glazing owners can accomplish. A professional locksmith can usually solve this issue within an hour of arriving at the property. They can repair the locking mechanisms, or replace the window handles and change the gearboxes, based on the specific requirements of your home. A professional locksmith can always advise you on the most cost-effective solution for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders, which offer an additional layer of protection against burglars. It is a small cost to get the peace of mind that comes from knowing your uPVC door is secured.

Broken Handle

It's not a surprise that window handle locks may break. They have complex mechanisms that wear out over time. It can be difficult to determine the reason behind a broken window handle lock and repair it correctly.

Repairing your damaged handle, whether it's an internal latch or the locking mechanism will increase the security of your uPVC door and prevent draughts. When you aren't doing it right, replacing or repairing the handle could be costly and may harm the door's frame as well as lock and frame, so it's worth spending the time to do it correctly.

Screwdriver Open the window remove the screw that holds the handle. The screw should be on the inside of the backplate. It is typically concealed by an eye-catching cap to conceal it to enhance the appearance. You should not lose any internal parts of the handle such as the plates and levers on either side. Ideally, keep them in the same order so that you can re-install them if needed.

Next, turn the handle until it's 90 degrees towards the window frame. Then, loosen the screw on the back of the handle that holds it to the internal spindle by using a second screwdriver. Once double glazing repair near me is loose, you can remove the handle and take out the broken spindle. Replace it with a new one, making sure that it's the same size as the previous one (you can typically find these on the internet or at hardware stores) and securely screw it in the correct position. Be cautious not to overtighten because this could damage the handle or the window frame.

Make sure the new handle is installed after which you can close and test the handle. Hopefully, it will work smoothly and you'll be able to open your window once more.

While you're working on the handle, make sure to check your uPVC windows are shut correctly. If they're not cause damp and draughts inside your home as in addition to compromising your home's energy efficiency. Core Sash Windows is a local window company that can alter the hinges on the window frames to ensure that they shut properly.

Broken Spindle

It is quite common that the spindle in the handle is broken, not the handle itself. This is most common in uPVC tilt-and-turn windows. These windows require a handle that acts as an electronic locking mechanism within the window frame. The handle is connected to a centre rod that in turn activates cams that look like mushrooms, they locks are inserted into the window frame. If the dead latch mechanism fails to open when the handle is turned it is possible that the spindle is broken This can be a frustrating problem.

There are solutions to this issue. A professional locksmith will be able to quickly and effectively address this problem. They will be able to disassemble the window handle by using a tool that can remove the wheel component of the mechanism, where the spindle is. This can be done without damaging the handle or causing other damage to the frame of the window.

After removing the wheel, the technician will inspect the spindle and identify the reason for its break. This involves disassembling the spindle and inspecting every component, observing any wear or damage. This procedure is typically carried out by technicians working in an environment that is clean.


The next step is to clean the damaged spindle. This will help get rid of any debris or dirt that could be hindering it from working normally. After this, the spindle can be repaired or replaced. If the technician is replacing the spindle he can use a dowel that is the same size to the original. The technician will then drill holes that are identical to both pieces. This will ensure that the new spindle has precisely matched to the handle.

If the damaged spindle cannot be repaired it may require replacement completely. Home centers sell generic replacements but if the style of your window is unusual then it will be necessary to contact a wood worker or cabinet maker who can replicate the exact component for you. Once the new spindle has been installed it can be positioned to the handle by line up the holes for screws in the handle with the frames existing screws. Once the handle is in place, you can use your uPVC windows.