Buzzwords De-Buzzed: 10 Alternative Ways To Say Double Glazing Door Lock Repairs Double Glazing Door Lock Repairs


Have you noticed that your uPVC window or door mechanism become faulty? Maybe the window or door handles aren't aligned properly or are difficult to use.

You will lose energy in the event that your double-glazed doors fail to work properly. This can also increase the risk of burglary. Owen the Locksmith can repair your door lock at an affordable cost.

Snapped Key

If a key breaks within a lock, it can be extremely annoying. It could also be an issue for security, since the door might not lock and make you vulnerable to burglars. There are a few easy fixes you can try to repair the issue and make your door work again.

Remember to remain calm. If you panic and begin playing around with your keys you could end up pushing the damaged piece of the key deeper into the lock, thereby making the situation much worse.

Next spray WD-40 or a different penetrating oil into the lock to make the broken piece to slide out more easily. You can also employ a screwdriver in order to break up any pieces stuck that might be blocking the way. If you happen to have a little bit of the key left sticking out and you want to remove it, use a paperclip or some other thin metal object to grab it and then pull it out. Both methods are effective, but you need to be careful not to push the broken key further into the keyway.

Some paperclips have grooved edges, which can be used as hook extractors and some Jigsaw blades can also be used for this purpose. If you don't have any of these you can bend a hook with needle-nosed pliers. You can also make use of a pair of tweezers to grab and remove the last bit of the broken keys.

If you are unable remove the broken key piece Use a lock deicer. It's available at most hardware stores and works by freezing any moisture present inside the lock.

If none of these solutions work, it might be time to consult a locksmith. The experts at Fitlocks can quickly fix problems with uPVC door locks and mechanisms, including snapped keys and broken handles. They can also reconfigure the double glazing door mechanisms so that they are easier to use. Request a repair for your double glazing with us online, or give us a phone call to discuss your requirements.

Broken Cylinder

A broken cylinder can pose a serious security risk. It's a good thing that it's a simple repair for professional locksmiths to complete. A locksmith will have to tap the cylinder to fix it. They can do this using an hammer or another tool, but the most efficient method is to use an extended match or piece of wire. Then, put the match's tip or wire close to the keyway. The locksmith will hit the lock to break it open. This is much safer than using a hammer that can damage the lock.

The most frequent cause of cracks in the cylinder head is overheating. This can occur when the block and the cylinder head are made of different metals, such as cast-iron or aluminum. Different metals can heat up and cool off at different rates. This can cause localised hotspots to expand more quickly than the rest.

Corrosion is a different cause of fractures in cylinders. If the head and block of the cylinder are not maintained in a timely manner they could be corroded or rust, which can cause them to expand faster than expected. Over time, this can also cause cracks.

If your uPVC window or door lock is stiff and requires more pressure to turn, it could be due to a variety reasons. This problem can result from a defective locking mechanism, or misalignment as well as a worn-out handle.

This is a simple and inexpensive fix that most double glazing owners can accomplish. A professional locksmith will usually be able to solve this problem within an hour after arriving at your residence. Based on your requirements, they can replace the locking mechanism, replace the window handles, and change the gearboxes. A locksmith with experience can always advise you on the most cost-effective solutions for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders, which give you an extra security layer from burglars. It's a small amount to enjoy the peace of mind that comes from knowing that your uPVC door is secured.

Broken Handle

Window handle locks are complex mechanisms that deteriorate as time passes and use, so it's no surprise that they sometimes break. It isn't easy to determine the reason behind the problem and then fix it properly.

If the issue is in the internal locking mechanism or the latch, repairing your broken handle will increase your uPVC double glazing door's security and help you stop drafts. It could be costly to replace or repair your handle if it is not done correctly and can also damage the frame and the lock of your door.

Screwdriver Open the window, loosen the screw holding the handle. The screw should be located on the inside of the backplate. double glazing repair is typically concealed by a screw cap to enhance the appearance. It is not recommended to be able to replace any internal parts of the handle, such as the levers and plates on either side. Ideally, keep these in the same place so you can replace them again if needed.

Then, turn the handle until it's 90 degrees towards the window frame. Then, loosen the screw at the back of the handle that holds it to the internal spindle by using another screwdriver. Once the screw is released, you'll be capable of pulling the handle off and pull off the damaged spindle. Replace it with a brand new spindle, ensuring it's the same length (you can buy them on the internet or at hardware stores). Screw it into place. Do not overtighten the screw as this can harm the handle as well as the window frame.

Check that the new handle is correctly installed, then close and test the handle. It is likely that it will operate smoothly and you'll be able unlock your window.

While you're working on the handle, be sure to check your uPVC windows are shut properly. If they don't then you may experience damp and draughts in your home as and also affecting your home's energy efficiency. Core Sash Windows is a local window company that can adjust the hinges on the window frames to ensure they close properly.

Broken Spindle

It is more typical for the spindle to break rather than the handle. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle that acts as an electronic locking mechanism within the frame of the window. The handle is connected to a central rod that activates a series of mushroom-shaped locking cams that lock into the window frame keep. If the dead latch mechanism does not open when the handle is turned it is likely that the spindle has broken This can be an extremely frustrating issue.

Luckily there are steps that can be taken to remedy this situation. A reputable locksmith can swiftly and efficiently fix this problem. A good locksmith will be able to disassemble the window's handle using a tool to remove the wheel from the area in which the spindle is. This is done without damage to the handle or the window frame.

Once the wheel is removed, the technician will examine the spindle to determine what caused it to break. This involves breaking down the spindle into its constituent parts and meticulously noting their general condition as well as any particular areas of wear or damage. This procedure is usually done in a clean room by skilled technicians.

The next step is to clean the damaged spindle. This will remove any dirt or other debris that could be hindering it from functioning normally. After this the spindle could be repaired or replaced. If the technician is replacing the spindle, he can use a dowel that is comparable in size to the original. Then, he will drill matching holes into both pieces. This will ensure that the new spindle has precisely matched to the handle.

If the damaged spindle cannot be repaired, it could need to be replaced entirely. Home centres sell generic substitutes however if your window style is rare then you'll need to contact an expert in cabinet making or woodworking who can replicate the exact part. After the spindle is installed, it can be fixed to the handle. Line up the screw holes on the handle with the existing screws in the frame. Once the handle is firmly set, you are able to operate your uPVC windows.