20 Trailblazers Leading The Way In Upvc Front Door Lock Replacement
UPVC Door Lock Replacement
UPVC doors are a great security measure against burglaries. They do have some limitations, but these can be overcome by installing deadlocks.
It may be time to replace the barrel lock if you feel that your uPVC door lock feels loose. This simple DIY project will improve the security of your home as well as improve its appearance.
Removing the old lock cylinder
You could have a damaged lock-cylinder when you notice that your front door is fragile or the lock is struggling to turn. Replacing it will ensure that it operates smoothly and increase security. The process is fairly simple and should take around 30 minutes. The only tool you'll require is an screwdriver. To start you must open your door and take a look at the edge of the lock the cylinder. There is a screw that is roughly parallel to the bottom of the cylinder. Take it off using the screwdriver and store it safely.
You'll need to know the size of the cylinder you have in place so you can locate a suitable replacement. Typically, the sizes vary from 60mm to 110mm. To determine the size, you'll need to locate the screw on the lock faceplate and then remove it. You can also turn the handle while the cylinder is in place to determine the amount it moves.
The next step is to measure the cylinder diameter and length of the cylinder cam. These measurements are essential to ensure that the new lock will be able to fit into the door. Based on the type of uPVC door, these measurements can vary. You'll need to pick the replacement cylinder which is the same size or slightly larger than the existing one.
After you have the measurements, it is time to take down the old door cylinder. It's an easy task but you need to perform it properly to avoid damaging your door or frame. Also, make sure the door is propped open or secured in a safe manner so that it won't close between steps.
If you don't have the time to tackle it yourself, a professional locksmith is an excellent choice. They can offer expert advice, flawless execution, and peace of mind. They can also assist you to choose a safe and secure locking system. However, DIY has its perks which include saving money and gaining new techniques. All you need is patience and the right tools such as a Phillips screwdriver. Change your uPVC lock isn't as intimidating as it seems.
Installing the new lock cylinder
If you are replacing the lock on your front door, it is important to use the right measurements and follow the steps to ensure that the new one is put in the right way. This will not only help you avoid issues in the future but it will keep your home safe and allow you to use keys for both sides of the door. You should determine the uPVC lock's overall length, backset and cylinder size before replacing it. These measurements will ensure that the new lock cylinder fits within the uPVC frame and functions correctly without gaps or weaknesses in security.
The first step is to take the handle from the door by loosening it using an screwdriver. The next step is to take off the barrel screw that holds the cylinder lock. Then, you can remove the lock you have previously used by inserting the key into the cylinder and turning it both left and right. When the key is in one of these positions it will be able to get rid of the cylinder by wriggling it out of its slot.
Installing the new cylinder into the front door is relatively easy and will involve the same steps you followed to remove the old one. However, you must be aware that the cylinder won't fit into the space where the previous one was. This is because the cylinder needs to be aligned correctly in order to be locked and closed with keys. To accomplish this, you must make sure that the cylinder has a circular keyway and is aligned in its slot.
It's not too difficult to install the latest uPVC door lock, however you must be cautious not to harm the door's frames or handles. If you aren't sure about your abilities to complete this task, consider hiring a professional who is Checkatrade approved and has experience working with these kinds of doors. A locksmith can save you money and time by completing the task quickly.
Attaching the door handle
You may want to change your lock on your front door for a variety of reasons. You could have lost your key, your previous tenant hasn't returned your keys or you'd like to upgrade to more secure locks. Change the barrel on a lock on a uPVC door is a straightforward task that can be completed in just five minutes. You will need a Phillips-head screwdriver, a new cylinder of the lock and a spare key (if you intend to use one). Make sure the door is secured or propped up so that it does not close during the process.
There are a few snags to changing a uPVC front door lock mechanism, but they are not as difficult to fix as you may think. Begin by determining what kind of lock is on your front door, then determine the size you will need to replace it with. For older doors, there are strip locks and multipoint lock options. It's easier to replace your uPVC door lock if you know the brand and type it's.
After replacing the cylinder, you will need to reconnect the handle. To begin, you will have to loosen a set screw on the spindle shaft of the handle with the aid of a screwdriver. This will allow you to remove the handle and expose the shaft of the spindle. If the shaft is threaded, you'll need to loosen it a bit before reversing it using a screwdriver in order to ensure proper fit.
Test the lock after you have tightened the screws and lock cylinder. Make sure the key is fitted and turns easily and that the handle's locking mechanism is functioning properly. If you don't feel comfortable doing this by yourself, a locksmith can do the job for you.
Be aware that uPVC lock mechanisms and door handles require regular lubrication in order to function properly. This is especially applicable in areas that experience high wear and tear, like those that are used frequently or locked and shut. By adding a small amount of lubricant can go a long way towards extending their lifespan and ensuring they function properly.
Testing the new lock
A door lock made of pvc is an essential part of your home's security. Like all other devices it is possible for a uPVC lock to get damaged or worn out in time. The key to a well-functioning uPVC lock is regular maintenance. This will stop malfunctioning issues from appearing and could compromise the security of your home. The best way to do this is to lubricate the internal mechanisms using an approved lubricant every six months. This will ensure that the lock is functioning smoothly and will prevent it from rusting or becoming damaged.
Apart from the standard oiling, you can apply a silicon-based spray to loosen the keyway and make it easier to insert the key. This is an easy DIY solution that could save you money in the long term. Be sure to not use WD-40, as it can leave oil residue behind that could damage the lock.
Once you have installed the new cylinder, it's essential to test it before assuming it works correctly. You can test this by testing the handle both from inside and outside the door. If everything is in order it is then time to place the handles back in place and then re-insert the spindle screw. Then, re-insert those screws that were holding them in place and pat yourself on the back for a job done well!
replace lock upvc door can also install additional features to enhance the security of your home, like door chains or sash jammers. They can also help you select the right locks for your home. A professional can also assist you in determining the ideal size of cylinder for your doors. This is crucial because a wrong lock can compromise your security.
The costs associated with replacing the cost of replacing a uPVC door lock can vary according to the kind of lock you select and the number of doors that require replacement. The cost of a professional locksmith ranges between PS75 and PS100 per hour. However, this price may vary depending on the location you reside in and the type of lock you require. Compare locksmith costs before settling on the best company.
