Window Repair Explained In Fewer Than 140 Characters Window Repairs

Window repairs can help homeowners save money and ensure their comfort. Window replacements may be required in the event of serious damage such as broken glass, or a window frame that has been smashed.

But there are many other issues that can be repaired to extend the life of your windows. The most frequent issues are:

Broken or cracked Panes

Whether it's an errant rock thrown by your lawnmower or a tree branch that has been blown by high winds, cracked window glass isn't just ugly, but it can also result in higher electricity bills as the broken pieces let cold air to enter your home. It's fairly easy to fix windows with broken panes.

Begin by carefully removing glass with gloves and safety sunglasses. You may have to employ a utility knife to remove any remaining putty or glazing compound around the edges of the frame. Then, use a gentle paper towel or cloth to clean the glass's surface and wood of the frame.

After cleaning the area, apply a silicone caulking that is water-proof to the frame's edges. This prevents water from getting into the crack, which could cause further damage to the frame and the glass.

If you have double-pane glass, a bad crack could compromise the gas layer that lies between the panes, making your windows less efficient in insulating. If the crack is significant enough to threaten the integrity of the glass, or if you have an inner pane that's totally missing, it might be time to contact a professional.

Cracks in the glass caused by thermal stress may occur when there's a drastic difference in temperature between your home and the outside. This causes the glass to expand and shrink. If the cracks are located on two sides of a glass, it is best to replace it rather than attempt to repair it.

For cracked windows that aren't yet ready to be replaced Clear tape can do a good job of securing the crack and keeping out bugs and cold air. You can also cut an area of nylon stocking or tarp sufficient to cover the crack, and stick it to the wall using duct tape. This is not a permanent solution, but it can keep insects and cold air away from your home. If your windows are old and you're starting to notice cracks in the glass It's a good idea to check with your local window company to determine if replacing the entire window would be a better option for you.

window repair near me is among the most common problems with windows. It can ruin a house's appearance and create a security danger. It is, however, possible to repair rotted wood. It is first necessary to identify the cause of the wood rot. This can be done by checking for leaks in the roof, missing gutters or cracked caulking, as well as other areas which allow water to penetrate the wood.

Next, you will need to get rid of any rotten areas of the window frame. This can be done using the use of a chisel, rasp or claw hammer. After the areas that are rotten have been removed, you will need to replace them with fresh wood. Pre-treated wood is recommended for this task, since it is resistant to rot. If you are not able to replace the rotted timber, you can use wood hardener and filler to strengthen the damaged area. This type of product will be available at most hardware stores. To achieve the best results, follow the instructions on the product label.

After you have replaced the rotten areas of the windowsill, it is essential to protect the newly-repaired area. Apply a water-resistant sealant on the wood. Sikkens, for example, is a great product to use.

Use a two-part epoxy to protect the wood from further damage. It is easy to apply and provides an excellent finish. However, it's important that you adhere to the instructions for application on the label. Once the epoxy filler has dried it is possible to sand the surface of the wooden. It is recommended to begin with a rough layer of sandpaper before moving to a smoother grade.

You do not want to expose the damaged part to further moisture. It is therefore a good idea to cover the repaired area with an oil-based primer that will shield it from moisture. After that, you can apply waterproof wood sealant.

It won't open

There are a variety of reasons a window won't open. Wood frames can warp in humid weather, the house might have sunk or someone might have closed it to protect themselves. With a bit of patience and the right tools, you can unlock most stuck windows.

One of the main reasons for windows that isn't opening is the accumulation of gunk or debris on its moving parts. Grime and dirt build up on the sliding tracks, hinges, and locks over time, says Acme Glass. Additionally, hardware made of metal can get rusty when in contact with humidity or direct sunlight. Spraying grease on these areas to help to prevent oxidation and ensure that your windows are operating correctly.

The pulleys that raise or lower the window may become loose, or break. These components can lose their tension and become obstructed, especially if the window is located two or more stories higher than the ground.

If you have trouble opening a door, you can use a pry-bar to gently push the window open. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Alternatively, try running a hair dryer along the edges of the frame for several minutes to warm the wood and help it move more easily.

Another common problem with windows that won't open is a defective spring that keeps the window jamb from rising or lowering. Depending on the manufacturer of the windows, you'll be required to refer to the owner's manual for additional instructions.


If you've tried cleaning the moving parts of your windows and then lubricating them but they still won't open, it might be time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don't let the windows in your home go from being functional to unusable. A window that isn’t properly shut could expose your home to water damage and burglary. Contact us to learn more about our windows replacement and services today!