10 Things Everybody Gets Wrong About Repair Window When It's Time to Repair Windows

It is important to be cautious when repairing your windows. Wear safety goggles and gloves to shield yourself from glass fragments.

An easy fix for a broken window is to place a plastic covering over the crack. This will stop insects, snow, and rain from entering the home.

Cracked Glass

Cracked glass can make your home appear less appealing and allow drafts to get in. window repairs near me could be caused by an impact (like a baseball or soccer ball) or are a result of stress, like a sudden change in temperature it is crucial to have them fixed as soon as you can to avoid further damage and keep your windows functioning properly.

If your window is cracked, but not broken, an easy fix is to use clear tape to cover it. It's a cheap and simple solution that will provide some protection from water, dust bugs, and other squatters, as well as keeping out the elements.

If the crack is becoming larger or is getting more extensive, it is best to consult with an expert. A professional glazier will determine the cause of a crack and recommend the most effective repair method.

A crack caused by an impact is the most popular type of window break typically caused by a sharp object striking your window with enough force to fracture it. These cracks usually have an arc of lines and broken pieces. They can be hazardous when they break loose. If you have double-pane windows, this crack may compromise the gas layer between the panes, which can affect your window's energy efficiency.

Stress cracks are another type of crack that develops because of extreme temperature fluctuations and other environmental factors. These cracks usually begin near the edges of your window and can eventually grow into full-blown cracks.

A more serious, but possible crack is one that is a pressure crack. It is typically a curvy line that runs across one or more sides of your window and could be the result of low or high air pressure, which can cause contraction or expansion of the glass.

If you're ready to take a step beyond nail polish and tape, there are alternatives to fix cracks in your window glass. A product such as Glass Repair Film is a little more expensive, but will provide a bit more protection and a longer lifespan for your windows. If you'd prefer to go the DIY method, epoxy is a strong adhesive that can be used to fill in cracks to help keep them from getting worse and make your window appear like it did not have cracks in the first place!

Leaking Windows

If you notice a damp spot under your window, or the wood surrounding it is soft or decaying, it may be time to replace your windows. Excessive moisture creates an ideal environment for mold and mildew which can lead to a myriad of issues for your home. They can reduce the quality of air inside, contribute to sagging drywall and even increase the severity of allergy symptoms. If not checked, they could cause structural damage to your home.

If the water is coming in from the outside or is visible through the frame it's a good idea to get a professional to help you to fix the problem right away. Leaking windows are among the main causes of structural and mold damage, so don't leave them untreated.

In many cases the use of caulking is to stop leaks. Before applying the new caulking, you'll need to clean the area and take off any caulking you have already applied.

Examine the weepholes on the frame for debris. These holes are designed to remove rainwater, but they could become clogged over time with insect corpses or other debris.

If windows have double panes, you'll also need to examine the seal between the glass and the frame. This will help maintain a barrier between the glass panes and help make the windows more efficient. The seal can wear down over time, however, and let water leak into the house.

The water stains on the walls and ceiling are another indication of the presence of a leak. The drywall will turn discolored once it is saturated by water. There may also be peeling paint caused by the effects of the water weakening its adhesive properties and tearing away from the wall.

Faux Muntins & Mullions

In the past, muntins and mullions (or glazing bars in the UK) separated and held panes of glass in traditional multi-pane windows. Since larger expanses of glass that were tempered became available after WWII They went out of fashion. They're mostly used as a decorative element in some older homes.

Wind or rain can damage a single support or a small group of them, creating an opening in the window. The good news is that you can repair most of these rotting or brittle elements.

First, use a rag to clean the affected areas. Use a cleaner based on ammonia that doesn't leave any residue. Remove any rotting or loose parts and use an exacta-knife trim the intersections between the horizontal and vertical painted window muntins. After trimming the intersections using painter's masking tape, you can use the tape to tape off the lower portion of the window frame. Apply a thick coat of white paint to the areas that you lightly painted in the initial pass. Allow the paint to dry completely before removing the tape and applying a second coat.

If the issue is more serious such as an hourglass-shaped fracture in the middle of the window, it's recommended to replace the sash. In these instances you'll need to search for a replacement that is similar to the existing window in both the design and size.

If you want to save money you can also put in an attached grid window. These windows come with a complete pane of glass with muntins that are attached to the surface, giving them a divided look. They are not as efficient in terms of energy efficiency as traditional windows.

If you're looking for an easy method to upgrade your windows, consider installing a new drip cap to prevent water from leaking around the window frame. You can find a variety of these drip caps made of aluminum at many home centers for less than $20. They're much simpler to install than an alternative window sash, and they'll provide you with the same function as an authentic mullion or muntin.

Broken Sashes & Frames


A damaged window sash must be a signal that you should call for help. If left unchecked the broken sash may cause wood rot, water leaks and more serious problems with the frame and sill. If you have a broken sash you should replace it as soon as you can to ensure that your window is sealed and operating.

The issue is usually caused by worn-out or improperly installed cords. It's easy to replace these cords on most double-hung window models. First, you'll need to take off the metal tabs holding the sash. To do this, push up on one side (it isn't important which) of the sash and then pull it towards the opposite side to remove it from the window frame. To reach the cords for the sash, you'll have to remove with care the parting strips that separate the sash.

It's important that you check the metal tabs on the old sash to those of the new one. If they're not the same, it will be difficult to place the new sash into its proper place and could affect how well the sash functions. Luckily, this is easily fixed by placing tabs in the correct positions on the new window.

You'll have to examine your window frame as well to look for any signs of damage or decay. It's a good idea to do on a regular basis, as wood shrinks and wears down as time passes. You should repair any visible damage as soon as you can, to avoid a larger problem.

If your window frames have begun to deteriorate they can be treated with a homemade preserver made of half mineral spirits and boiled Linseed. After the treatment is dry, you can finish your frames with a high-quality latex paint. A fresh coat of paint will help to protect your window from the elements, too.