Why Is It So Useful? When COVID-19 Is In Session Door Handle Replacement

Door handles appear to be something minor however, if you don't like the way they look or are unable to use them then it's time to replace them. Installing the new handle on your door is easy if you have patience.

Modern door handles are typically equipped with cover plates which hide the screws for an attractive look. If the new handle doesn't have them already attached, you will have to attach them separately.

Removal of the old Handle

Door handles are not only important for their aesthetic value to your home, but they're also crucial for safety as they let you lock and unlock your door. Over time the door handle can become loose or feel loose. It could also appear old and worn. This is a good indication that it's time to replace the door handle.

If your door handle is becoming difficult to use, it could be time to replace it. This is a problem since it means that you can not lock or unlock your door, which could create a security risk for you and your family.

It is also an excellent idea to replace the handle on your door in the event that it's damaged or broken. A damaged or broken door handle could be extremely dangerous, particularly when your children or elderly family members are unable to open it, and get trapped inside. Luckily, it's quite easy to fix a broken door handle by replacing the handle that was broken.

Most modern door handles are standard size and therefore should fit any door. If you aren't certain if your new door handle will work, take out the old one and take measurements of its holes in the housing. This will allow you to buy the right door handle.

The easiest method to take off the door handle you have been using is to remove it from the door. This is usually done using the screw driver. Some door handles come with a cover plate which hides the screws that mount them. You'll need to remove this to get to the screws. Once you have removed the old handle, take a note of how the spindle is positioned to ensure you are able to align it when you fit your new one.

You can also remove the door handle by uncrewing it from the latch mechanism. This is usually done with an screwdriver however you'll need to find the small latch, which should be just to the left of the trim piece. After you have removed the latch, take off the handle and the strike plate. Then remove the latch from the door's edge.

Removing the Strike Plate

You'll need to replace your latch plate when you replace the handle. It's the plate that holds the hole where the latch for the door is inserted when the door closes. The new handles will have two latch plates: a rectangular and circular plate (see the diagram above which illustrates the components of a door handle). If your current latch plate has rectangular in shape, swap it to a round one, so that the latch hooks onto the strike plate in a manner that makes the handle more comfortable to operate.


The first step is to unscrew the screw that is holding the old latch plate in place. These screws can be quite tight, and will require some force to loosen. If you are able, it could be beneficial to have a second person assist with this part.

After the screws have been removed the latch should pull out of the door easily. If the latch plate is stuck or won't move use a small file to scrape the edges. This will sometimes free the plate up.

You can now move on to making the new door strike plate for installation. Utilizing the wood screws that came with your new handles, attach the latch plate onto the inside of the doorjamb. Be cautious not to tighten too much the screws, as this may damage the strike plate.

If you're unsure whether the latch plate is in the proper position, close and open the door to determine whether it latches and closes correctly. If it doesn't you'll have to adjust the strikeplate either up or down, forward or back until the door closes correctly.

If the door is moving or jiggling, you may need to enlarge the latch hole in the strike plate. This is more frequent in older doors, however it could be due to wear and tear, hinge mortises that are too narrow or are not sized correctly for the latch, or due to damage or a broken strike plate that is damaged or broken. If this is the situation, use a metal filing instead of a chisel or hammer to adjust the strike plate.

Removing the Latch

The latch is an angled metal piece that slides in and out of a hole in the inside of your door. upvc door handles Repair My Windows And Doors is moved forward when you turn the handle. It also connects to an opening in the door frame to keep the door closed. If your door is wiggles when you close it, replacing the latch may be all you need to correct the issue.

The screws that support the door latch are difficult to see, but you can usually put a screwdriver in a small hole on the trim plate, and then pull the latch off. After taking off the trim plate you will be able to pull off the latch and the bolts that hold it in place and the spindle.

If the latch won't come out you can try using an old-fashioned paper clip or tool to release it from the handle mechanism. Place the item into the slot for the latch that is recessed and gently twist it or jiggle until the handle and latch begin to break off. You may have to repeat this procedure several times before you are able to remove the latch.

It should be possible to slide the new latch into its slot without issues after you've removed the old one. Use your new screws to connect the latch to the strike plate or door frame. Make sure it's correctly placed in the slot, and aligned with the screw chambers.

Before installing the new handle, make certain to measure your existing backset (the distance from the centre of the large hole on the front of the door to the edge). You should also check that the size of the latch on the new handle is a good match to the measurement of your existing handle.

You'll require a new lock cylinder if you're replacing the handle and latch or if your current one is damaged. If you're not switching locks the new lock should fit in your existing recess and also work with your current keys. Choose a latch that has rectangular cover plates that match the handles you have.

Take off the cover plate

Door handles can start to look shabby with time, but if you replace them with a modern lever-on-rose designs, it's a simple and quick DIY and decorating project that will enhance the overall appearance of your home. You can purchase complete sets of escutcheons, the escutcheons as well as privacy adaptors and escutcheons.

The first step in replacing the door handle inside is to remove the cover plate or rose, which covers the screws and the mechanism within. Use a flathead for removing the cover plate. It may have an opening on one edge or be secured by a pin.

When the cover plate is removed take the screw that holds the interior handle in place and set it aside. It is also necessary to remove the screws that hold the latch and plates and the latch plate, which can be done by loosening them using the help of a Philips screwdriver. Remove the inner plates and latch from the door. Place them aside.

Most doors have an opening between the door jamb and the inside edge of the frame, which allows for a handle, however not all do. If yours isn't have a handle, you'll need to drill a hole into the door. It's the same procedure as opening a locked door however you'll have to be extra cautious not to harm the frame or door.

After the holes are drilled, you'll need to install new door knob screws. Make sure to buy the same size as the old ones, so you don't end up with the handle that is too tight or loose. Installing a new strike rod and latch is also mandatory. These are not included in all door handle sets.

Amazon's Choice FAERSI 2-piece chrome finish handle sets are an excellent option if you're in need of a premium interior door handle replacement set. It's a factory-fit and has received hundreds of 5-star reviews from happy customers. It's an excellent choice for replacing worn or damaged interior door handle hardware on your Chevy HHR.