11 Creative Ways To Write About Double Glazing Door Lock Repairs Double Glazing Door Lock Repairs

Have you noticed that your uPVC window or door mechanism started to fail? Perhaps the window or door handles aren't able to connect properly or are hard to use.

You will lose energy in the event that your double-glazed doors fail to perform as they should. This increases the chance of burglary. Owen the Locksmith can repair your door lock at an affordable cost.

Snapped Key

It can be frustrating when a key is snapped into a lock. It also poses a security risk, as the door may not be locked and make you vulnerable to intruders. There are a couple of quick fixes you can make to fix the problem and make your door functional again.


The first step is to remain calm. If you panic you could end up pushing the broken key further into the lock.

Then, spray WD-40 or another penetrating oil into the lock to aid in making the broken piece slide out more easily. You can also employ a screwdriver in order to break up any pieces stuck that might be hindering the flow. If you're fortunate enough to have a small piece of the key left visible and you want to remove it, make use of a paperclip, or any other metal object that is thin to grab it and remove it. Both methods are effective, but you need to be careful not to push the damaged key further into the keyway.

Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades can also work well for this. If you don't have any of them handy, you can use needle-nose pliers to bend and create a hook. Finally, you can use a pair tweezers to grasp and pull out the remaining pieces of broken keys.

If you are unable remove the broken piece of key, use a lock deicer. It is available at all hardware stores. It is used to freeze any moisture or ice that may be in the lock.

If none of these solutions work, it might be time to call a locksmith. Fitlocks experts can quickly fix problems with uPVC door mechanisms and locks, including snapped keys and broken handles. They can also reconfigure double glazing door mechanisms so that they are simpler to use. You can schedule a double-glazing repair online or call us to discuss your needs.

Broken Cylinder

A damaged cylinder could pose a major security risk. A locksmith professional can fix the cylinder. A locksmith must tap the cylinder to repair it. They can do this with an hammer or another tools, but the most effective way is to make use of a long match or piece of wire. Then, double glazing repair near me or wire close to the keyway. The locksmith will then strike the lock to break it. This is more secure than using a hammer that could cause damage to the lock.

The most common cause of cracks in the head of a cylinder is due to overheating. This can happen when the block and the cylinder head are made of different metals like cast-iron and aluminum. When different metals heat up and cool down at different rates, it can create hotspots in the local area that expand faster than the rest of the cylinder head, thus leading to cracks.

Another reason that could cause cracks in cylinders is corrosion. If the cylinder head and cylinder block are not maintained properly, this could lead to rusting or corrosion and cause them to expand at a greater rates than they should. This could lead to cracks over time.

If your uPVC window lock or door is stiff or requires lots of pressure to turn, this could be due to a number of things. A faulty locking mechanism, misalignment, or a worn handle are common causes of this issue.

Fortunately it is a simple and inexpensive fix for most double glazing owners. A professional locksmith will usually be able to solve this issue within a matter of hours of arriving at your property. They can repair the locking mechanisms, or change the window handles and change the gearboxes based on the specific requirements of your home. A locksmith with experience will always be able to advise you on the most cost-effective options for your home. They can even suggest upgrades to 3 Star security Euro cylinders, TS007, that will add an extra layer of security against burglars. It's a small price to enjoy the peace of mind that comes from knowing your uPVC door is secure.

Broken Handle

It's not surprising that window handle locks can break. They have intricate mechanisms which deteriorate over time. It isn't always easy to pinpoint the cause of the problem and repair it correctly.

If the issue is in the internal locking mechanism or the latch, fixing the broken handle will increase your uPVC double glazing door's security and allow you to stop drafts. When you aren't doing it right, replacing or repairing your handle can be very expensive and can cause damage to the door's frame and lock It is therefore worth taking some time to do it correctly.

With the window in the open position then loosen the screw that secures the handle by using a screwdriver. The screw should be on the inside face of the back plate, which is usually hidden by an attractive cover for the screw for aesthetic reasons. It is not recommended to lose any internal components of the handle like the plates and levers on either side. Keep them in the same order to make it simpler to replace them in the event of a need.

Then, rotate the handle until it's 90 degrees to the window frame. Finally, loosen the screw on the back of the handle that holds it to the internal spindle with a second screwdriver. Once the screw is loose, remove the handle and take the broken spindle out. Replace it with a new one, ensuring it's the same length as the old one (you will typically find them online or in hardware stores) and securely screw it into the right place. Be careful not to overtighten as this could damage the handle or the window frame.

Check that the new handle is fitted, then close and test the handle. It is likely that it will operate smoothly and you'll be able to unlock your window.

While you're working on the handle, don't forget to check your uPVC windows are shut properly. If they're not then you may experience draughts and damp in your home, as in addition to compromising the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges of the frames of your windows to ensure they close properly.

Broken Spindle

It is usually the case that the spindle in the handle is broken, not the handle itself. This is most frequent in uPVC tilt and turn windows. These windows require a handle that operates an electronic locking mechanism within the frame of the window. The handle is connected to a rod in the centre that in turn activates mushroom-like locking cams, these lock into window frame keeps. If the dead latch mechanism does not open when the handle is turned it is likely that the spindle has broken and this could be a frustrating problem.

There are ways to fix this problem. A reputable locksmith can swiftly and efficiently solve the issue. They can disassemble the window handle by using a tool that can remove the wheel portion of the mechanism, where the spindle is. This is done without damaging the handle or causing other damage to the frame of the window.

Once the wheel has been removed, the technician can inspect the spindle and determine what caused it to break. This involves disassembling the spindle and examining every component, observing any wear or damage. The process is done in a clean environment by skilled technicians.

The next step is to clean the damaged spindle. This will remove any dirt or other debris that might be preventing it from operating normally. The spindle may then be repaired or replaced. If the technician is replacing the spindle, the dowel can be used that is comparable in size to the original. He will then drill matching holes into both pieces. This will ensure that the spindle will fit perfectly with the handle.

If the damaged spindle is beyond repair, it may be required to replace it completely. Home centers offer generic replacements but if the style of your window is unusual then it is necessary to contact a wood worker or cabinet maker who can replicate the exact component for you. Once the new spindle has been installed it can be positioned to the handle by lining up the screw holes in the handle and the frame existing screws. Once the handle is securely in place, you can use your uPVC windows.