It's The Next Big Thing In Peugeot 208 Key Replacement Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot key fob suddenly stopped working, it could be due to an inoperative battery for the coin-cell or water damage, receiver modules issues, or even a defective chip. These are all simple solutions and you'll be able to restore your car to speed in a matter of minutes!

Car keys can also become faulty because the blade of the key gets worn. You can easily fix this issue by visiting your local Car Key Man Auto Locksmith to install a new blade.

Battery

The key fob battery in your Peugeot 308 can sometimes die or become too weak to send an energizing signal to the car. The key fob may cease to function and stop you from locking or unlocking your doors or even starting the engine. To fix this issue, you'll need to replace the battery on your key fob.


You'll need to purchase a replacement battery from an auto parts store or your local hardware store. When you purchase the battery, ensure that it's new and hasn't sat on the shelf for too long. A brand new battery has more capacity and will transmit a stronger signal to your car.

After replacing the battery If you have a new battery, try unlocking and locking the doors of your Peugeot by using the key fob. If the doors won't unlock, it's likely that the receiver module inside the car is at fault. Your local Peugeot dealer can reprogramme the receiver module.

It's also possible that the chip inside your key fob is damaged. This can happen if you drop your key fob on the ground or expose it to water. Rubber seals that protect your chip from moisture could become worn out over time. This is especially the case when you expose your key fob to water for long periods of time, such as submerging it at the beach in the ocean. To avoid this, you should keep your key fob clear of the reach of moisture and away from water.

Water Damage

Don't give up on your key fob when it becomes wet, whether you dropped it into the pool or stumbled into a Puddle. While the key fob has rubber seals which should shield it from water, long-term exposure to water could result in damage to its electronic chip. Since water is such a good conductor, any water that is able to get inside the key fob may cause a series of short circuits that will eventually damage the chip. After removing the battery, scrub its contacts with isopropyl alcohol and dry it off completely before putting it back in.

Your Peugeot 308 may not start due to a dead battery. If you have an extra car, jumper cables could be used to start the engine again. If the battery is faulty it is required to replace it.

A defective receiver in your car can also prevent it from receiving the signal from the keyfob. The key fob may be damaged or there may be an issue with the antenna, wiring or the key fob itself. It is possible to program a new keyfob for your vehicle if using one. If you are unable fix the problem yourself, contact a professional technician. A trained technician in the field will be able diagnose the problem quickly, and fix the issue immediately.

Radio Interference

Signs like keys not being recognized or with a limited range often mean that there is an interference in the system. This is either radiated or conducted, with the latter resultant from power supply cables and speaker wiring passing too close to electrical components. In general, rerouting cables or moving them away from these components will fix the issue.

It's unlikely someone is listening to your key fob's signals in order to steal your car It's possible, however, that radio interference has drowned out the signal. Fortunately, this is easy to fix.

If your key fob is not being recognized by the system, try replacing the battery. Also, make sure that the battery is of the right type and size. A wrongly sized battery can cause damage to the fob.

These devices may interfere with the key signal if they operate on the same radio frequency. Avoid connecting these devices to your key fob.

Pairing Issues

A car's remote keyless entry system is a receiver that receives radio frequency signals from the key fob. If this receiver develops issues, you will not be in a position to begin your vehicle, even if the key fob functions and can be changed. This issue could be caused by a variety of ways, such as a dead coin-cell battery or water damage. The receiver could be malfunctioning because of an internal or software glitch or damage to the key itself.

The battery inside your Peugeot 308 keyfob has probably been drained. The battery can be easily replaced, but you need to ensure that it's the proper battery for your keyfob. It is recommended to use one that is the same size with the same voltage, specifications, and specifications as the original.

Your Peugeot 308 keyfob may not function if associated with an unrelated vehicle. You might have accidentally given your key fob a friend or the key was used to unlock other vehicles. This issue can be solved by reprogramming the key fob with an OBDII scan. G28CarKeys will ask you for details about your car, like its VIN or engine type. It is essential to enter the correct details.