8 Tips To Improve Your Kia Picanto Key Fob Replacement Game How to Replace a Kia Sportage Replacement Key


The key of a lot of Kia models has an electronic keyless entry system built into. This key is similar to a remote control and can be exchanged with a Kia dealer.

Key fobs can stop working due to a variety of reasons, including a dead battery, worn-out buttons signals, signal interference or water damage. Here are some helpful tips to assist you in getting your Kia sportage replacement key working again.

How to replace the remote key or smartkey

Whether your Kia is equipped with an intelligent key, remote key push to start key or a regular non-transponder metal key, the battery in these keys will eventually need replacing. This is particularly true if your car displays a message that indicates the remote or smart keys are in poor condition.

This is a relatively easy process. In order to replace the key fob battery take out the mechanical key from the slit in the back of the key fob. Then pry open the cover. Inside the key fob there will be an incredibly small screw that holds the battery in its place. Using a small screwdriver, unscrew the screw and remove the old battery. Then, insert the new and close the hole in the key fob.

When the key fob is equipped with new batteries, test it by pressing the lock and unlock buttons. If the doors unlock and lock as expected, then you're set! You can now utilize the hands-free feature to lock and unlock your Kia whenever your fingers feel cold or you have to do some errands in Brandon.

Note: Certain key fobs could need to be programmed (transponder chips or smart keys). This requires a programing machine, which is only available to the locksmith in the automotive or dealer. Other keys (non-transponder metal keys) don't require programming. If your key requires to be reprogrammed, then you will need to be aware of the key code that is stamped on the tag that identifies the key and keep it in a safe location.

How do I replace a battery

If the Kia key fob does not respond to pressing the lock or unlock button, it's likely that the battery is not fully charged. A low battery may also cause other issues, such as the check engine light coming on or delayed engine cranking. It is relatively easy to replace key fob batteries by using only a few simple tools.

Before beginning the process be sure that your vehicle is off and that all doors are shut. Find the small metal or plastic piece that is on the bottom of your key fob, and gently jiggle it until the metal key is released. The key can be put into the driver door handle to unlock your car.

To replace the battery on the key fob, take off the cover that covers the rear. Use a plastic pry tool to remove the latch that holds the black negative cable. Remove G28CarKeys , and then align the new one to ensure that the "+" positive side is facing you and the "-" negative side is facing the fob's metal electrical contacts. Push the new CR2032 battery straight into position and avoid excessive force to avoid damaging or bending the contacts on the metal.

After installing the new battery, turn the key fob off and on in the ignition until the door locks cycle. You can then test your Kia's keys fob to ensure it's functioning properly.

How can you replace the smart key

You may have either an ordinary keyfob or Smart Key, based on the model of Kia Sportage. The difference is that the smart fob has tiny mechanical key blade that is hidden inside, while the standard key fob does not. Both key fobs come with an internal battery that will eventually require replacement. Luckily, this is an easy task that will take about two minutes.

Be sure to switch off your Kia and be on a flat and well-lit surface prior to you begin. Be aware that there are tiny parts inside the fob that could fall out if not cautious.

The first step is to find the small release button that is located on the back of the lower part of the fob. It's either a circular button or a rectangular slot. When you press it mechanical key blade, it will appear and you will be able to open the key fob.

Once you have the key fob opened and you are able to remove the old battery, and replace it. The new battery is a one called CR-2032 and can be bought from a local or online auto parts store. After you're done, your key fob should be able to lock the vehicle, unlock it, and then start your vehicle, even if it isn't running.

How do you replace a mechanical key

The Kia key fob is an amazing feature that lets us lock and unlock our vehicle with the press of one button. Like all devices that is used, the Kia key fob can have issues at times. There are ways to fix these issues and keep our key fobs in good working condition for the long term.

One of the most frequently encountered issues is a low or dead battery. This can cause the device to stop working entirely or even to stop working intermittently. If this is the case try replacing the battery with a new one.

If this doesn't solve the issue, you can use a standard flathead screwdriver to wedge the fob's casing made of plastic open. Be careful not to damage any internal components or scratch the plastic. After the battery has been removed, replace it with a brand new battery.

After the new battery has been put installed, close and unlock the doors using the mechanical key (every kia fob has an emergency mechanical key that will fit in the slot). Test the key fob to verify that it's working correctly. If the device isn't working, contact an authorized locksmith or dealer to resolve the problem. To avoid future lockouts, ensure you have an emergency key that can be able to work with all door and trunk cylinders.